Owner's Manual

16
Interrupting Transmission/Removing Transfer Marking
To cancel transmission of images marked with white or green
transfer icons, select the images during playback and press J and
the center of the multi selector. The transfer icon will be removed.
Any of the following actions will also interrupt transmission:
• Turning the camera off (transfer marking is saved, and transfer
will resume when the camera is next turned on)
• Selecting Ye s for Network > Options > Deselect all? (062; this
option also removes transfer marking from all images)
A Firewall Settings
TCP port 15740 and UDP port 5353 are used for host computer
connections. Computer firewalls must be configured to allow access to
these ports, as otherwise the computer may not be able to access the
camera.
A Interval Timer Photography
Upload will be interrupted if the standby timer expires while interval
timer photography is in progress. Choose a long standby time before
starting the interval timer.
A Voice Memos
Voice memos can not be uploaded separately, but will be included
when the associated pictures are transmitted.
A During Upload
Do not remove the memory card or disconnect the Ethernet cable
during upload.
A Loss of Signal
Wireless transmission may be interrupted if the signal is lost. Transmission
can be resumed by turning the camera off and then on again.
A Destination Folders
By default, images are uploaded to the following folders:
• Windows: \Users\(user name)\Pictures\Wireless Transmitter Utility
• Mac: /Users/(user name)/Pictures/Wireless Transmitter Utility
The destination folder can be selected using the Wireless Transmitter
Utility.