Owner's Manual

19
3 Select Enable.
Highlight Enable and press J to
connect to the network and return to
the network menu.
The profile name will be displayed in
green when a connection is established.
4 Start Camera Control Pro 2.
Start the copy of Camera Control Pro 2 (available separately)
installed on the host computer. For information on using
Camera Control Pro 2, see the Camera Control Pro 2 manual
(pdf).
A Firewall Settings
TCP port 15740 and UDP port 5353 are used for host computer
connections. Computer firewalls must be configured to allow access to
these ports, as otherwise the computer may not be able to access the
camera.
A Ethernet Networks
Do not disconnect the Ethernet cable while the camera is on.
D Wireless Networks
Operations may take longer on wireless networks. If the signal is
disrupted while pictures are being transferred to Camera Control Pro 2,
the camera network indicator or the LED on the WT-5 will flash amber;
disable and re-enable the network connection (055). Transfer will
resume when the connection is re-established. Note that transfer can
not be resumed if you turn the camera off before transfer is complete.