Owner's Manual

59
Wireless
Edit the following wireless settings:
• SSID: Enter the name (SSID) of the network
on which the host computer or ftp server is
located.
• Communication mode: Select Infrastructure
for wireless communication via a wireless
network access point, Access point to use the camera as an
access point to connect to the ftp server or computer instead of
connecting via a wireless network access point.
• Channel: Select a channel (access point mode only; in
infrastructure mode, the channel will be selected automatically).
• Authentication: The authentication used on the network. Choose
from open system, shared key, WPA-PSK, and WPA2-PSK
(infrastructure) or open system and WPA2-PSK (access point
mode).
• Encryption: The encryption used on the network. The options
available depend on the authentication used:
Open: None; 64- or 128-bit WEP available when Infrastructure
is selected for Communication mode
Shared: 64- or 128-bit WEP
WPA-PSK: TKIP; AES
WPA2-PSK: AES
• Encryption key: If the network uses encryption, enter the network
key. The number of characters required depends on the type of
key used:
• Key index: If WEP64 or WEP128 is selected for Encryption in
infrastructure mode, choose a key index matching that used by
the access point or host computer. A key index is not required
when No encryption is selected.
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hex) 10 26 64