User's Manual

52
x
Photo live view
display WB
During live view photography,
the white balance (hue) of the
monitor can be set to a value
different from that used for
photographs (0 159).
This can
be effective if the lighting under
which shots are framed is
different from that used when the photographs are taken,
as is sometimes the case when a flash or preset manual
white balance is used.
Adjusting the photo live view
display white balance to produce a similar effect to that
used for the actual photographs makes it easier to picture
the results.
To use the same white balance for both the
view in the monitor and the photograph, select None.
Note that regardless of the option selected, same white
balance is also used for both the view in the monitor and
the photograph when Silent photography is on (0 54).
Monitor white balance is reset when the camera is turned
off, but the last value used can be selected by pressing
the a button while pressing and holding the U button.
Split-screen
display zoom
View two separate areas of the
frame side-by-side (0 53). This
option can be used, for example,
to align buildings with the
horizon.
Silent
photography
The shutter remains open during shooting, eliminating
the sound made by the shutter (0 54).
Option Description