User Manual

164
3 Press J.
Press J to save settings and return to
the photo shooting menu. If white
balance has been fine-tuned, an
asterisk (“U”) will be displayed in the
control panel.
❚❚ The U Button
At settings other than K (Choose color temp.) and L (Preset
manual), the U button can be used to fine-tune white balance
on the amber (A)–blue (B) axis (0 163; to fine-tune white
balance when L is selected, use the photo shooting menu as
described on page 179). Press the U button and rotate the
sub-command dial to fine-tune white balance in steps of 0.5
(with each full increment equivalent to about 5 mired) until the
desired value is displayed in the control panel. Rotating the sub-
command dial to the left increases the amount of amber (A).
Rotating the sub-command dial to the right increases the
amount of blue (B). At settings other than 0, an asterisk (“U”)
appears in the control panel.
U button Sub-command
dial
Control panel