User Manual

165
A The Information Display
During viewfinder photography, you can
press the U button to adjust white balance
settings in the information display.
Rotate
the main command dial to choose the white
balance mode and rotate the sub-command
dial to choose the color temperature (mode
K, “choose color temperature”) or white
balance preset (preset manual mode), or use the multi-selector to fine-
tune white balance on the amber (A)–blue (B) and green (G)–magenta
(M) axes (other white balance modes).
A White Balance Fine-Tuning
The colors on the fine-tuning axes are relative, not absolute.
For
example, moving the cursor to B (blue) when a “warm” setting such as
J (Incandescent) is selected for white balance will make
photographs slightly “colder” but will not actually make them blue.
A “Mired”
Any given change in color temperature produces a greater difference
in color at low color temperatures than it would at higher color
temperatures.
For example, a change of 1000 K produces a much
greater change in color at 3000 K than at 6000 K.
Mired, calculated by
multiplying the inverse of the color temperature by 10
6
, is a measure of
color temperature that takes such variation into account, and as such is
the unit used in color-temperature compensation filters.
E.g.:
• 4000 K–3000 K (a difference of 1000 K)=83 mired
• 7000 K–6000 K (a difference of 1000 K)=24 mired