Owner's Manual

149
3 Frame a photograph, focus, and shoot.
The camera will vary exposure and/or flash level shot-by-shot
according to the bracketing program selected.
Modifications
to exposure are added to those made with exposure
compensation (see page 143).
While bracketing is in effect, a bracketing progress indicator
will be displayed in the viewfinder and control panel. A
segment will disappear from the indicator after each shot.
❚❚ Canceling Bracketing
To cancel bracketing, press the BKT button and rotate the main
command dial until the number of shots in the bracketing
sequence is zero (r) and M is no longer displayed. The
program last in effect will be restored the next time bracketing is
activated. Bracketing can also be cancelled by performing a
two-button reset (0 230), although in this case the bracketing
program will not be restored the next time bracketing is
activated.
No. shots: 3; increment: 0.7 Display after first shot
A See Also
For information on choosing the size of the exposure increment, see
Custom Setting b2 (EV steps for exposure cntrl, 0 294).
For
information on choosing the order in which bracketing is performed,
see Custom Setting e7 (Bracketing order, 0 301).
For information on
choosing the role of the BKT button, see Custom Setting f1 (Custom
control assignment) > BKT button + y (0 301).