Owner's Manual

97More on Photography
A The Camera Shutter-Release Button
If an ML-L3 remote release mode is selected and the shutter is released
by pressing the camera shutter-release button, the camera will
function in single-frame release mode.
A Exiting Remote Control Mode
Remote control mode is cancelled automatically if no photograph is
taken before the time selected for the Remote on duration (ML-L3)
option in the setup menu (0 208).
Remote control mode will also be
cancelled if the camera is turned off or shooting options are reset using
Reset shooting menu.
A Using the Built-in Flash
Before taking a photograph with the flash in manual pop-up modes
(0 89), press the M (Y) button to raise the flash and wait for the M
indicator to be displayed in the viewfinder (0 38).
Shooting will be
interrupted if the flash is raised after the shutter-release button on the
ML-L3 is pressed.
If the flash is required, the camera will only respond
to the ML-L3 shutter-release button once the flash has charged.
In
auto pop-up modes, the flash will begin charging when a remote
control mode is selected; once the flash is charged, it will automatically
pop up and fire when required.