User Manual

77
Copying Pictures to the Computer
Before proceeding, be sure you have installed ViewNX-i (0 76).
1 Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect a USB cable (available separately) as
shown and then turn the camera on.
Using ViewNX-i
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
A Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
A Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables.
Do not use force or attempt to insert the
connectors at an angle.