Owner's Manual
Table Of Contents
- User Manual
- Reference Manual
- Reset
- Table of Contents
- Introduction
- First Steps
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- More on Photography
- P, S, A, and M Modes
- Recording and Viewing Movies
- Playback and Deletion
- Connections
- Camera Menus
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- Setup Menu Options
- Format Memory Card
- Image Comment
- Copyright Information
- Time Zone and Date
- Language
- Beep Options
- Touch Controls
- Monitor Brightness
- Info Display Format
- Auto Info Display
- Info Display Auto Off
- Image Dust Off Ref Photo
- Flicker Reduction
- Slot Empty Release Lock
- Location Data
- Remote Control
- Airplane Mode
- Connect to Smart Device
- Send to Smart Device (Auto)
- Wi-Fi
- Bluetooth
- Eye-Fi Upload
- Conformity Marking
- Firmware Version
- Setup Menu Options
- The Retouch Menu: Creating Retouched Copies
- Recent Settings/My Menu
- Technical Notes
- Troubleshooting
- Error Messages
- Specs
- Index
- AF-P DX 18-55mm f/3.5-5.6G VR Lens
157P, S, A, and M Modes
Modifying Picture Controls
Existing preset or custom Picture Controls (0 161) can be
modified to suit the scene or the user’s creative intent.
Choose a
balanced combination of settings using Quick adjust, or make
manual adjustments to individual settings.
1 Select a Picture Control.
Highlight Set Picture Control in the
shooting menu and press 2.
Highlight the desired Picture Control
and press 2.
2 Adjust settings.
Press 1 or 3 to highlight the desired
setting and press 4 or 2 to choose a
value in increments of 1, or rotate the
command dial to choose a value in
increments of 0.25 (0 158).
Repeat
this step until all settings have been adjusted, or select a
preset combination of settings by using the multi selector to
choose Quick adjust.
Default settings can be restored by
pressing the O button.
3 Save changes and exit.
Press J.
Picture Controls that have been
modified from default settings are
indicated by an asterisk (“*”).