User Manual
Table Of Contents
- Table of Contents
- For Your Safety
- Notices
- Bluetooth and Wi-Fi (Wireless LAN)
- Introduction
- First Steps
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- More on Photography
- P, S, A, and M Modes
- Recording and Viewing Movies
- Playback and Deletion
- Connections
- Camera Menus
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- Setup Menu Options
- Format Memory Card
- Image Comment
- Copyright Information
- Time Zone and Date
- Language
- Beep Options
- Touch Controls
- Monitor Brightness
- Info Display Format
- Auto Info Display
- Info Display Auto Off
- Image Dust Off Ref Photo
- Flicker Reduction
- Slot Empty Release Lock
- Location Data
- Remote Control
- Airplane Mode
- Connect to Smart Device
- Send to Smart Device (Auto)
- Wi-Fi
- Bluetooth
- Eye-Fi Upload
- Conformity Marking
- Firmware Version
- Setup Menu Options
- The Retouch Menu: Creating Retouched Copies
- Recent Settings/My Menu
- Technical Notes
134 P, S, A, and M Modes
Flash Compensation
Flash compensation is used to alter flash output from the level
suggested by the camera, changing the brightness of the main
subject relative to the background.
Flash output can be
increased to make the main subject appear brighter, or reduced
to prevent unwanted highlights or reflections (0 360).
Keep the M (Y) and E (N) buttons pressed and rotate the
command dial until the desired value is selected in the
viewfinder or information display.
In general, positive values
make the main subject seem brighter while negative values
make it seem darker.
Normal flash output can be restored by
setting flash compensation to ±0.
Except in h mode, flash
compensation is not reset when the camera is turned off (in
h mode, flash compensation will be reset when another
mode is selected or the camera is turned off).
M (Y) button
Command dial Information display
E (N) button
–0.3 EV +1 EV
+