User Manual

141
4 Select direct measurement mode.
Release the L (U) button briefly
and then press the button until D
starts to flash in the control panel
and viewfinder.
5 Measure white balance.
In the few seconds before the
indicators stop flashing, frame the
reference object so that it fills the
viewfinder and press the shutter-release button all the way
down. The camera will measure a value for white balance and
store it in the preset selected in Step 3. No photograph will be
recorded; white balance can be measured accurately even
when the camera is not in focus.
A Protected Presets
If the current preset is protected (0 147), 3 will flash in the control
panel and viewfinder if you attempt to measure a new value.