User Manual

150
Modifying Picture Controls
Existing preset or custom Picture Controls (0 149) can be
modified to suit the scene or the user’s creative intent. Choose a
balanced combination of settings using Quick adjust, or make
manual adjustments to individual settings.
1 Select a Picture Control.
Highlight the desired Picture Control
in the Picture Control list (0 148) and
press 2.
2 Adjust settings.
Press 1 or 3 to highlight the desired
setting and press 4 or 2 to choose a
value in increments of 1, or rotate the
sub-command dial to choose a value
in increments of 0.25 (0 151; the
options available vary with the Picture
Control selected). Repeat this step until all settings have been
adjusted, or select a preset combination of settings by
highlighting Quick adjust and pressing 4 or 2. Default
settings can be restored by pressing the O (Q) button.
3 Press J.
A Modifications to Original Picture Controls
Picture Controls that have been modified
from default settings are indicated by an
asterisk (“E”).