User Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
184
Set Picture Control Choose Picture Control used for movies (0 148).
Monitor brightness
Press 1 or 3 to adjust monitor brightness (note
that this affects live view only and has no effect on
photographs or movies or on the brightness of the
monitor for menus or playback; 0 269).
Multi-selector
power aperture
Select Enable to enable power aperture. Press 1 to
widen the aperture, 3 to narrow the aperture.
Highlight display
Choose whether the
brightest areas of the
frame (highlights) are
shown by slanting lines
in the display.
Headphone volume
Press 1 or 3 to adjust headphone volume.
Electronic VR
Select On to enable electronic vibration reduction
in movie mode. Not available at a frame size of
3840 × 2160 (0 188). Note that if the electronic
vibration reduction is on and DX is selected for
Choose image area, the angle of view is reduced
and the edges of the frame will be cropped out.
A Using an External Microphone
The optional ME-1 stereo microphone or ME-W1 wireless microphone
can be used to record sound for movies (0 287).
A Headphones
Third-party headphones can be used. Note that high sound levels may
result in high volume; particular care should be taken when
headphones are used.
Option Description
Highlights