User Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
302
Shooting (All Modes)
Camera takes time to turn on: Delete files or folders.
Shutter-release disabled:
• Memory card is locked, full, or not inserted (0 21, 22).
• Release locked is selected for Slot empty release lock in the setup
menu (0 273) and no memory card is inserted (0 21).
• Built-in flash is charging (0 55).
• Aperture ring for CPU lens not locked at highest f-number (does not
apply to type G and E lenses).
• Non-CPU lens is attached but camera is not in mode M (0 72).
Camera is slow to respond to shutter-release button: Select Off for Custom
Setting d3 (Exposure delay mode; 0 264).
No photo taken when remote control shutter-release button is pressed:
• Replace battery in remote control.
• Choose an option other than Off for Remote control mode (ML-L3)
(0 175).
• Flash is charging (0 177).
• Time selected for Custom Setting c5 (Remote on duration (ML-L3),
0 263) has elapsed.
• Bright light is interfering with remote.
Only one shot taken each time shutter-release button is pressed in continuous release
mode: Continuous shooting is not available when built-in flash fires
(0 163) or with HDR (high dynamic range; 0 155).
Photos are out of focus:
• Rotate focus-mode selector to AF (0 100).
• Camera unable to focus using autofocus: use manual focus or focus
lock (0 111, 115).
Beep does not sound:
• Off is selected for Beep options > Beep on/off (0 271).
• AF-C is selected as the focus mode or subject moves when AF-A is
sel
ected (0 100).