User Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
308
Bluetooth and Wi-Fi (Wireless Networks)
Miscellaneous
Smart devices do not display the camera SSID (network name):
• Confirm that Disable is selected for Airplane mode in the camera
setup menu (0 272).
• Confirm that Enable is selected for Bluetooth > Network connection
in the camera setup menu.
• Try turning the smart device Wi-Fi off and then on again.
Can not connect to wireless printers and other wireless devices: This camera can
connect only to devices to which the SnapBridge app has been installed.
Date of recording is not correct: The camera clock is less accurate than most
watches and household clocks. Check the clock regularly against more
accurate timepieces and reset as necessary.
Menu item can not be selected: Some options are not available at certain
combinations of settings or when no memory card is inserted. Note that
Battery info option is not available when camera is powered by an
optional power connector and AC adapter.