User Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
337
❚❚ Focus
Focus mode is determined by the camera focus mode and the
position of the lens focus mode switch. See the camera manual
for information on camera focus mode selection.
M/A (Autofocus with Manual Override)
Getting Good Results with Autofocus
Refer to “A Note on Wide- and Super Wide-Angle Lenses”
(0 345).
Camera focus mode
Lens focus mode
M/A M
AF
Autofocus with
manual override
Manual focus with
electronic rangefinder
MF Manual focus with electronic rangefinder
1 Slide the lens focus-mode switch to M/A.
2Focus.
If desired, autofocus can be over-ridden by rotating the lens
focus ring while the shutter-release button is pressed halfway
(or, if the camera is equipped with an AF-ON button, while the
AF-ON button is pressed). To re-focus using autofocus, press
the shutter-release button halfway or press the AF-ON button
again.