User Manual
Table Of Contents
- Get SnapBridge Now!
- Package Contents
- Table of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Connecting Using SnapBridge
- Tutorial
- Basic Photography and Playback
- Matching Settings to the Subject or Situation (Scene Mode)
- Special Effects
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Recording and Viewing Movies
- Other Shooting Options
- More on Playback
- Menu List
- Technical Notes
39
SnapBridge normally connects to the camera via Bluetooth, but
switches to Wi-Fi as required for remote photography or when
downloading high volumes of data. Before switching to Wi-Fi,
SnapBridge will prompt you to enable the Wi-Fi connection on
your iOS device. Follow the steps below.
1 Tap Go when prompted. The camera
SSID and password will be displayed;
make a note of the SSID and
password before continuing.
2 Tap <Settings to display iOS
settings.
3 Tap Wi-Fi.
4 Tap the SSID you noted in Step 1.
The Wi-Fi Prompt (iOS)