Owner's Manual

80 Menu Guide
A During Shooting
During shooting, the memory card access
lamp will light and the time-lapse recording
indicator will be displayed in the control
panel. The time remaining (in hours and
minutes) appears in the shutter-speed
display immediately before each frame is
recorded. At other times, the time remaining
can be viewed by pressing the shutter-
release button halfway. Regardless of the
option selected for Custom Setting c2
(Standby timer, 0 96), the standby timer
will not expire during shooting.
To view current time-lapse movie settings
or end shooting (0 78), press the G
button between shots. While shooting is in
progress, the time-lapse movie menu will
show exposure smoothing, the interval,
and the time remaining. These settings can
not be changed while shooting is in
progress, nor can pictures be played back or other menu settings
adjusted.
A Image Review
The K button can not be used to view pictures while shooting is in
progress, but the current frame will be displayed for a few seconds
after each shot if On is selected for Image review in the playback
menu (0 22). Other playback operations can not be performed while
the frame is displayed.
A See Also
For information on the beep that sounds when shooting is complete,
see B > Beep options (0 142).
Memory card access
lamp