Owner's Manual

22
D Memory Cards
• Memory cards may be hot after use. Observe due caution when
removing memory cards from the camera.
• Turn the power off before inserting or removing memory cards. Do
not remove memory cards from the camera, turn the camera off, or
remove or disconnect the power source during formatting or while
data are being recorded, deleted, or copied to a computer. Failure to
observe these precautions could result in loss of data or in damage to
the camera or card.
• Do not touch the card terminals with your fingers or metal objects.
• Do not bend, drop, or subject to strong physical shocks.
• Do not apply force to the card casing. Failure to observe this
precaution could damage the card.
• Do not expose to water, heat, high levels of humidity, or direct
sunlight.
• Do not format memory cards in a computer.
A No Memory Card
If no memory card is inserted, the control
panel and viewfinder will show S. If
the camera is turned off with a charged
battery and no memory card inserted,
S will be displayed in the control
panel.
A The Write Protect Switch
SD memory cards are equipped
with a write protect switch to
prevent accidental loss of data.
When this switch is in the “lock”
position, the memory card can not
be formatted and photos can not
be deleted or recorded (a warning will be displayed in the monitor if
you attempt to release the shutter). To unlock the memory card, slide
the switch to the “write” position.
Write-protect switch
16
GB