Owner's Manual

226 Technical Notes
GPS units GP-1 GPS Unit/GP-1A GPS Unit: Connect to the camera
accessory terminal to record the current latitude,
longitude, altitude, and UTC (Coordinated Universal
Time) with pictures taken with the camera (0 144).
USB cables UC-E20 USB Cable (0 212, 215): A USB cable with a Micro-B
connector for connection to the camera.
HDMI cables
(0 219)
HC-E1 HDMI Cable: An HDMI cable with a type C connector
for connection to the camera and a type A connector for
connection to HDMI devices.
Software Camera Control Pro 2: Control the camera remotely from a
computer and save photographs directly to the
computer hard disk. When Camera Control Pro 2 is used
to capture photographs directly to the computer, a PC
connection indicator (c) will appear in the control
panel.
Note: Use the latest versions of Nikon software; see the Nikon website for
your region for the latest information on supported operating systems. At
default settings, Nikon Message Center 2 will periodically check for updates to
Nikon software and firmware while you are logged in to an account on the
computer and the computer is connected to the Internet. A message is
automatically displayed when an update is found.
Availability may vary with country or region. See our website or brochures for the latest
information.
A Using the Accessory Terminal
Connect accessories as shown, with the H
mark on the connector aligned with the F
next to the accessory terminal. To prevent
malfunction caused by foreign matter on the
terminal, close the camera connector cover
when the terminal is not in use.