Owner's Manual

128 Recording and Viewing Movies

3 Start recording.

Press the movie-record button to start

recording. A recording indicator and

the time available are displayed in the

monitor. Sound is recorded via the

built-in microphone; be careful not to

obstruct the microphone during

recording. Except in i and j modes,

exposure can be locked by pressing

the A (L) button (0 102) or (in

scene, P, S, A, and % modes) altered by

up to ±3 EV in steps of

3 EV by

pressing the E (N) button and

rotating the command dial (0 104;

note that depending on the

brightness of the subject, changes to

exposure may have no visible effect).

4 End recording.

Press the movie-record button again

to end recording. Recording will end

automatically when the maximum

length is reached, the memory card is

full, or another mode is selected.

5 End live view.

Rotate the live view switch to end live

view.

A Viewing the Movie Crop

To view the movie crop in live view, press R to select the “show movie

indicators”, “hide movie indicators”, or “framing grid” display (0 8).

Movie-record button

Time remaining

Recording indicator