Owner's Manual

203Menu Guide > C The Photo Shooting Menu
Ending Multiple Exposures
To end a multiple exposure before the
specified number of exposures have
been taken, select Off for Multiple
exposure mode or press the K button
followed by the i button and select
either Save and exit or Discard and
exit. If shooting ends or you select Save and exit before the
specified number of exposures have been taken, a multiple
exposure will be created from the exposures that have been
recorded to that point. If Average is selected for Overlay mode,
gain will be adjusted to reflect the number of exposures actually
recorded. Note that shooting will end automatically if the
standby timer expires.
D The Standby Timer
Menus and playback can be used between exposures, but note that if
no operations are performed for about 40 seconds during playback or
90 seconds while menus are displayed, shooting will end and a
multiple exposure will be created from the exposures recorded to that
point. The time available to record the next exposure can be extended
by choosing longer times for Custom Setting c3 (Power off delay) >
Playback and Menus.
D Interval Timer Photography
If interval timer photography is activated before the first exposure is
taken, the camera will record exposures at the selected interval until
the number of exposures specified in the multiple exposure menu
have been taken (the number of shots listed in the interval timer
shooting menu is ignored). These exposures will then be recorded as a
single photograph and interval timer shooting will end (if On (single
photo) is selected for multiple exposure mode, multiple exposure
shooting will also end automatically).