Owner's Manual

17Connecting to Computers via Wi-Fi
The camera’s link to an existing network can be suspended or
resumed as described below.
Disconnecting
You can disconnect by turning the camera off, selecting Disable
for Connect to PC> Wi-Fi connection in the setup menu, or
selecting Wi-Fi connection> Close Wi-Fi connection in the i
menu for shooting mode. The connection to the computer will
also end if you use Wi-Fi to connect to a smart device.
Reconnecting
To reconnect to an existing network, either:
• select Enable for Connect to PC> Wi-Fi connection in the
setup menu, or
• choose Wi-Fi connection> Establish
Wi-Fi connection with PC in the i
menu for shooting mode.
Disconnecting and Reconnecting
D Access-Point Mode
An error will occur if the computer’s wireless connection is disabled
before the camera’s. Disable camera Wi-Fi first.
D Access-Point Mode
Enable camera Wi-Fi before connecting.
D Multiple Network Profiles
If the camera has profiles for more than one network, it will reconnect
to the last network used. Other networks can be selected using the
Connect to PC> Network settings option in the setup menu.