Reference Manual

379Remote Flash Photography
3 C: Adjust flash settings.
Choose the flash level (Output), the
maximum number of times the flash
units fire (Times), and the number of
times the flash units fire per second
(Frequency).
Enable or disable selected groups.
Select ON to enable the selected
group, –– to disable the selected
group.
Choose a channel for the master flash.
If the remote flash units include an
SB-500, you must choose channel 3,
but otherwise you can choose any
channel between 1 and 4.
4 f: Set the remote flash units to the same channel as the
master flash.
Set the remote flash units to the channel selected in Step 3.