User Manual

Table Of Contents
191Technical Notes
Learn how to store, clean, and care for your camera.
Storage
When the camera will not be used for an extended period,
remove the battery and store it in a cool, dry area with the
terminal cover in place. To prevent mold or mildew, store the
camera in a dry, well-ventilated area. Do not store your camera
with naphtha or camphor moth balls or in locations that:
are poorly ventilated or subject to humidities of over 60%,
are next to equipment that produces strong electromagnetic
fields, such as televisions or radios, or
are exposed to temperatures above 50 °C (122 °F) or below
–10 °C (14 °F)
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Camera body: Use a blower to remove dust and lint, then wipe
gently with a soft, dry cloth. After using the camera at the
beach or seaside, wipe off sand or salt with a cloth lightly
dampened in distilled water and dry thoroughly. Important:
Dust or other foreign matter inside the camera may cause
damage not covered under warranty.
Lenses, viewfinder: Glass surfaces are easily damaged. Remove
dust and lint with a blower. If using an aerosol blower, keep the
can vertical to prevent the discharge of liquid. To remove
fingerprints and other stains, apply a small amount of lens
cleaner to a soft cloth and clean with care.
Monitor: Remove dust and lint with a blower. When removing
fingerprints and other stains, wipe the surface lightly with a
soft cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.
Caring for the Camera