User Manual

203Technical Notes
Range (ISO 100, f/2.0 lens,
20 °C/68 °F)
–3 – +17 EV
Mode Auto (b); programmed auto with flexible
program (P); shutter-priority auto (S); aperture-
priority auto (A); manual (M); user settings (U1,
U2, U3)
Exposure compensation –5 – +5 EV in increments of
1
/ 3 or
1
/ 2 EV available
in modes P, S, A, and M
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended Exposure
Index)
ISO 64 – 25600 in steps of
1
/ 3 or
1
/ 2 EV. Can also
be set to approx. 0.3, 0.5, 0.7, or 1EV (ISO 32
equivalent) below ISO 64 or to approx. 0.3, 0.5,
0.7, 1, or 2 EV (ISO 102400 equivalent) above
ISO 25600; auto ISO sensitivity control available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Multiple exposure Add, average, lighten, darken
Other options HDR (high dynamic range), photo mode flicker
reduction
Focus
Autofocus Hybrid phase-detection/contrast AF with AF
assist
Detection range (ISO 100,
f/2.0 lens, 20 °C/68 °F)
−1 – +19 EV (−4 – +19 EV with low-light AF)
Lens servo • Autofocus (AF): Single-servo AF (AF-S);
continuous-servo AF (AF-C); full-time AF (AF-F;
available only in movie mode); predictive
focus tracking
• Manual focus (M): Electronic rangefinder can be
used
Focus points 493 (single-point AF)
AF-area mode Pinpoint, single-point, and dynamic-area AF
(pinpoint and dynamic-area AF available in
photo mode only); wide-area AF (S); wide-area
AF (L); auto-area AF
Exposure