Reference Manual

281Menu Guide > A Custom Settings
Selecting Ye s allows adjustments that are normally made by
holding a button and rotating a command dial to be made by
rotating the command dial after the button is released. This
setting applies to the E, S, and c (E) buttons and also to
controls to which the following roles have been assigned using
Custom Settings f2 or g2 (Custom control assignment):
Choose image area, Image quality/size, White balance, Set
Picture Control, Active D-Lighting, Metering, Flash mode/
compensation, Focus mode/AF-area mode, Auto bracketing,
Multiple exposure, HDR (high dynamic range), Exposure
delay mode, Shutter spd & aperture lock, Peaking highlights,
Choose non-CPU lens number, and Microphone sensitivity.
If (W) is selected, the exposure indicator is
displayed with negative values on the left and positive values
on the right. Select (V) to display positive
values on the left and negative values on the right.
f6: Release Button to Use Dial
G button ➜ A (Custom Settings menu)
f7: Reverse Indicators
G button ➜ A (Custom Settings menu)