Reference Manual

294 Menu Guide > B The Setup Menu
Use the multi selector as shown below to
adjust monitor color balance with
reference to a sample image. The sample
image is the last photograph taken or, in
playback mode, the last photograph
displayed; to choose a different image,
press the W (Q) button and select an
image from a thumbnail list (to view the
highlighted image full frame, press and
hold X). If the memory card contains no
photographs, an empty frame with a
gray border will be displayed in place of
the sample image. Press J to exit when adjustments are
complete.
Note that monitor color balance can only be adjusted when the
monitor is the active display; it cannot be adjusted in the
“viewfinder only” monitor mode or when your eye is to the
viewfinder. Monitor color balance applies only to the shooting,
playback, and menu displays; pictures taken with the camera are
not affected.
Monitor Color Balance
G button ➜ B (setup menu)
Increase green
Increase blue Increase amber
Increase magenta