Reference Manual

304 Menu Guide > B The Setup Menu
Adjust settings for connection to HDMI devices (0 344).
Adjust settings for use when the camera is connected to a device
that provides location data, namely a GPS receiver or a smart
device running the SnapBridge app (for more information on
SnapBridge, see the app’s online help).
• Standby timer: If Enable is selected when a GPS receiver is
connected, the exposure meters will turn off automatically if
no operations are performed for the period specified Custom
Setting c3 (Power off delay)> Standby timer, reducing the
drain on the battery.
• Position: View the location data supplied by the GPS receiver or
smart device (the items displayed vary with the source).
• Set clock from satellite: Select Ye s to synchronize the camera clock
with the time reported by the GPS device.
HDMI
G button ➜ B (setup menu)
Location Data
G button ➜ B (setup menu)