Reference Manual

433Technical Notes
Mode Auto (b); programmed auto with flexible
program (P); shutter-priority auto (S); aperture-
priority auto (A); manual (M); user settings (U1,
U2, U3)
Exposure compensation –5 – +5 EV in increments of
1
/ 3 or
1
/ 2 EV available
in modes P, S, A, and M
Exposure lock Luminosity locked at detected value
ISO sensitivity
(Recommended Exposure
Index)
• Z7: ISO 64 – 25600 in steps of
1
/ 3 or
1
/ 2 EV. Can
also be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO
32 equivalent) below ISO 64 or to approx. 0.3,
0.5, 0.7, 1, or 2 EV (ISO 102400 equivalent)
above ISO 25600; auto ISO sensitivity control
available
• Z6: ISO 100 – 51200 in steps of
1
/ 3 or
1
/ 2 EV. Can
also be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO
50 equivalent) below ISO 100 or to approx. 0.3,
0.5, 0.7, 1, or 2 EV (ISO 204800 equivalent)
above ISO 51200; auto ISO sensitivity control
available
Active D-Lighting Can be selected from Auto, Extra high, High,
Normal, Low, or Off
Multiple exposure Add, average, lighten, darken
Other options HDR (high dynamic range), photo mode flicker
reduction
Focus
Autofocus Hybrid phase-detection/contrast AF with AF
assist
Detection range (single-
servo AF/AF-S, photo
shooting mode, ISO 100,
f/2.0 lens, 20 °C/68 °F)
• Z7: −1 – +19 EV
• Z6: −2 – +19 EV
• With low-light AF: −4 – +19 EV
Lens servo • Autofocus (AF): Single-servo AF (AF-S);
continuous-servo AF (AF-C); full-time AF (AF-F;
available only in movie mode); predictive
focus tracking
• Manual focus (M): Electronic rangefinder can be
used
Exposure