Owner's Manual

Table Of Contents
637
Ethernet/Wireless Transmitter Troubleshooting
“Connecting to PC”
does not clear from
the camera display.
Check firewall settings (
0
519).
The camera displays
the message,
“Ethernet cable is not
connected”.
Connect an Ethernet cable or select [Wireless
LAN] for [Choose hardware] (
0
520, 521).
The camera displays
a “no memory card”
error.
The memory card is inserted incorrectly or not at
all. Confirm that the memory card is correctly
inserted (
0
38).
Upload is interrupted
and fails to resume.
Upload will resume if the camera is turned off and
then on again (
0
592).
No connection is
established when the
camera URL is
entered in a web
browser in http
server mode.
Confirm that the browser is not using a proxy
connection.
Problem Solution