Owner's Manual

Table Of Contents
638
Ethernet/Wireless Transmitter Troubleshooting
Error Codes
The following messages and error codes may be displayed if an
error occurs while the camera is connected via Ethernet or using
a WT-6.
“[Wireless error.]”
“[TCP/IP error.]”
Error code Solution
Err. 11
Confirm that the device to which you are
attempting to connect is on.
Check the SSID (
0
941).
Err. 12
Confirm that you are using the correct
password for the selected SSID.
Confirm that you are using the correct
authentication method (
0
941).
Err. 13
Confirm that the device to which you are
attempting to connect is on.
Turn the camera off and then on again.
Err. 1F Turn the camera off and then on again.
Error code Solution
Err. 21
Check that the TCP/IP address and sub-net
mask are correct (
0
944).
Err. 22
Duplicate TCP/IP address. Choose a different
address (
0
944).