Owner's Manual

646
Flash Control Mode
•
Settings for the SB-5000 can also be adjusted using the
controls on the flash unit.
Option Description
[TTL]
•
Flash output is adjusted automatically in response to
lighting conditions.
•
Output can be adjusted using [Flash compensation
(TTL)]. In the cases of the SB-500, SB-400, and SB-300,
flash compensation can be adjusted by holding the
W
(
M
) button and rotating the sub-command dial.
[Auto
external
flash]
•
Light from the flash is reflected from the subject to
an auto external flash sensor and flash output
adjusted automatically.
•
Output can be adjusted using [Auto external flash
compensation].
•
Auto external flash supports “auto aperture” (
q
A)
and “non-TTL auto” (A) modes. See the flash unit
manual for details.
[Distance-
priority
manual]
•
Choose the distance to the subject; flash output will
be adjusted automatically.
•
The distance to the subject is selected using
[Distance-priority options]> [Distance], while flash
output can be adjusted using [Flash compensation].