Owner's Manual

1115
Specifications
Although calibration is recommended for accurate
measurement of battery charge state, calibration need not be
performed when the calibration lamp flashes. Once begun,
calibration can be interrupted as desired.
•
If the calibration button is not pressed while the calibration
lamp is flashing, normal charging will begin after about ten
seconds.
•
To interrupt calibration, press the calibration button again.
Calibration will end and charging will begin.
When calibration is complete, the calibration and charge lamps
will turn off and charging will begin immediately.
Approximate time needed to recalibrate battery
Under 2
hours
2–4 hours 4–6 hours
Over 6
hours
Charge
lamps
(green)
2h
I
(off)
K
(on)
K
(on)
K
(on)
4h
I
(off)
I
(off)
K
(on)
K
(on)
6h
I
(off)
I
(off)
I
(off)
K
(on)
Calibration (CAL
ON) lamp (yellow):
L/R
K
(on)
K
(on)
K
(on)
K
(on)