Owner's Manual

176
Compatible F Mount Lenses
1 IX-NIKKOR lenses cannot be used.
2 M (manual focus) is available with all lenses.
3 Vibration reduction (VR) is supported with VR lenses.
4[Spot metering] meters the selected focus point.
5 Fog, lines, and other image artifacts (“noise”) may appear in photos
taken with the electronic front-curtain shutter. This can be
prevented by selecting [Disable] for Custom Setting d6 [Electronic
front-curtain shutter].
6 Cannot be used with shifting or tilting.
7 The camera’s exposure metering and flash control systems will not
function as expected when the lens is shifted and/or tilted, or when
an aperture other than the maximum aperture is used.
8Mode M (manual) only.
9 For information on the focus points available for autofocus and
electronic rangefinding, see “AF-S/AF-I Teleconverters and Available
Focus Points” (
0
180).
10 When an AF 80–200mm f/2.8, AF 35–70mm f/2.8, AF 28–85mm
f/3.5–4.5 <New>, or AF 28–85mm f/3.5–4.5 lens is focused at the
minimum distance at maximum zoom, the in-focus indicator may be
displayed when the image on the matte screen in the viewfinder is
not in focus. Adjust focus manually until the image in the viewfinder
is in focus.
•
“Noise” in the form of lines may appear during autofocus at high ISO
sensitivities. Use manual focus or focus lock. Lines may also appear at
high ISO sensitivities when aperture is adjusted during movie recording
or live view photography.