Owner's Manual

205
Choosing the Operation Performed When the Shutter Is Released (Release Mode)
D
Frame Advance Rate
•
The frame rates for CL and CH modes and for burst photography in
mode Q can also be selected using Custom Setting d1 [Continuous
shooting speed].
•
The maximum frame advance rate when [On] is selected for [Silent live
view photography] during live view is approximately 10.5 fps, even if
rates of from 11 to 14 fps are selected in CH mode.
•
The figures for frame advance rate apply in mode S or M at shutter
speeds of
1
/
250
s or faster with AF-C selected for autofocus mode and
other settings at default values. Frame advance rates may slow:
- at slow shutter speeds,
- when [On] is selected for [ISO sensitivity settings] > [Auto ISO
sensitivity control] in the photo shooting menu and ISO sensitivity is
altered automatically by the camera,
- if flicker is detected with [Enable] selected for [Flicker reduction] >
[Flicker reduction setting] in the photo shooting menu,
- at extremely small apertures (high f-numbers),
- when vibration reduction (available with VR lenses) is on,
- when the battery is low,
- with certain lenses, or
- if a non-CPU lens is attached with [Aperture ring] selected for
Custom Setting f6 [Customize command dials] > [Aperture setting].
S
Quick release-
mode
selection
Hold the
S
button and rotate the main
command dial to select the release mode
(
0
208).
Mode Description