Owner's Manual

228
Achieving Natural Colors with Different Light Sources (White Balance)
2
Fine-tune white balance.
•
Use the multi selector to position
the cursor on the grid. The cursor
can be moved up to six steps from
the center along either of the A
(amber)–B (blue) and G (green)–M
(magenta) axes. The selected value
is displayed to the right of the grid.
•
The A (amber)–B (blue) axis corresponds to color
temperature and is ruled in increments of 0.5. A change of
1 is equivalent to approximately 5 mired.
•
The G (green)–M (magenta) axis has effects similar to color
compensation filters and is ruled in increments of 0.25. A
change of 1 is equivalent to approximately 0.05 diffuse
density units.
3
Save changes.
•
Press
J
to save changes and exit to the menus.
•
If white balance has been fine-
tuned, an asterisk (“
U
”) will be
displayed in the rear control panel.