Owner's Manual

335
Taking Photos at a Set Interval (Interval Timer Shooting)
D
Before Shooting
•
Take a test shot at current settings.
•
Select [Time zone and date] in the setup menu and make sure that the
camera clock is set to the correct time and date.
•
We recommend using a tripod and disabling lens vibration reduction
(VR).
•
To ensure that shooting is not interrupted, use a fully-charged battery
or an AC adapter and power connector (available separately).
•
To prevent light entering via the viewfinder interfering with
photographs or exposure when your eye is from the viewfinder and
[Off] is selected for [Silent photography], raise the viewfinder eyepiece
shutter lever to close the viewfinder eyepiece shutter.
[Starting storage
folder]
Highlight either of the following options and press
2
to select; selected items are marked with a check
(
M
). To deselect (remove the check from:
U
) a
selected option, highlight it and press
2
again.
•
[New folder]: A new folder is created for each new
sequence.
•
[Reset file numbering]: File numbering is reset to
0001 whenever a new folder is created.
Option Description