Owner's Manual

Table Of Contents
512
Troubleshooting Built-in Wi-Fi
Solutions to some common issues are listed below.
Troubleshooting information for the SnapBridge app can be
found in the app’s online help, which can be viewed at:
https://nikonimglib.com/snbr/onlinehelp/en/index.html
For information on the Wireless Transmitter Utility, see the
utility’s online help.
Troubleshooting Built-in Wi-Fi
Problem Solution
The camera displays a
TCP/IP error.
Connection settings require adjustment.
Check settings for the host computer or
wireless router and adjust camera settings
appropriately (
0
933).
The camera displays a
“no memory card” error.
The memory card is inserted incorrectly or not
at all. Confirm that the memory card is
correctly inserted (
0
38).
Upload is interrupted
and fails to resume.
Upload will resume if the camera is turned off
and then on again (
0
503).