Owner's Manual

521
Connecting an Ethernet Cable or WT-6
Attaching the WT-6
Rotate the peripheral connector cover up out of the way (
q
)
and fully insert the connectors on the WT-6 into the camera’s
peripheral connector (
w
). Rotate the locking wheel to lock the
WT-6 in place (
e
).
•
Select [Wireless LAN] for [Wired LAN/
WT] > [Choose hardware] in the setup
menu.
D
Choosing a Power Source
To prevent the camera powering off unexpectedly during setup or data
transfer, use a fully-charged battery or an optional AC adapter.