Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Getting to know the Laser Rangefinder
- Functions
- Inserting/Replacing battery
- Navigating the menus
- Operation diagram of the setting menus (PROSTAFF 1000i)
- Changing the distance display unit (F1) (PROSTAFF 1000i)
- Changing the measurement display mode (F2) (PROSTAFF 1000i)
- Changing the target priority mode (F3) (PROSTAFF 1000i)
- Operation diagram of the setting menus (PROSTAFF 1000)
- Changing the distance display unit (F1) (PROSTAFF 1000)
- Changing the target priority mode (F2) (PROSTAFF 1000)
- Measurement
- Technical notes
- Warranty
13
En
Fr
• Operating the MODE button
There are two ways to press the MODE button. Operate the button while following the descriptions in this manual.
- “Press and hold” means to continue pressing the button for 1.5 seconds or longer.
- “Press” means to press the button quickly (less than 1.5 seconds).
Operation diagram of the setting menus (PROSTAFF 1000i)
Press and hold the MODE button.
Press the MODE button.
Press the PWR button.
Standby
Measurement display mode: F2
Distance display unit: F1
(Distant Target Priority mode)
N/A (Actual distance mode)(Horizontal distance mode)
(yard) (meter)
(First Target Priority mode)
Target priority mode: F3
If you press and hold the MODE button or do not operate the buttons for about 8 seconds while operating
the setting menus, the displayed setting is saved and the Laser Rangefinder returns to standby.
Navigating the menus