Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Getting to know the Laser Rangefinder
- Functions
- Inserting/Replacing battery
- Navigating the menus
- Operation diagram of the setting menus (PROSTAFF 1000i)
- Changing the distance display unit (F1) (PROSTAFF 1000i)
- Changing the measurement display mode (F2) (PROSTAFF 1000i)
- Changing the target priority mode (F3) (PROSTAFF 1000i)
- Operation diagram of the setting menus (PROSTAFF 1000)
- Changing the distance display unit (F1) (PROSTAFF 1000)
- Changing the target priority mode (F2) (PROSTAFF 1000)
- Measurement
- Technical notes
- Warranty
14
En
Fr
Changing the distance display unit (F1) (PROSTAFF 1000i)
For the display unit of the measurement results, select YD (yards) or m (meters). Factory default setting is
YD (yard).
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
• You can now change the distance display unit.
3. The setting switches every time you press the PWR button.
(yard) (meter)
• If you press and hold the MODE button or do not operate the buttons for
about 8 seconds, the displayed setting is saved and the Laser Rangefinder
returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.