Owner's Manual
Table Of Contents
- Instruction Manual
- Introduction
- Getting to know the Laser Rangefinder
- Functions
- Inserting/Replacing battery
- Navigating the menus
- Operation diagram of the setting menus (PROSTAFF 1000i)
- Changing the distance display unit (F1) (PROSTAFF 1000i)
- Changing the measurement display mode (F2) (PROSTAFF 1000i)
- Changing the target priority mode (F3) (PROSTAFF 1000i)
- Operation diagram of the setting menus (PROSTAFF 1000)
- Changing the distance display unit (F1) (PROSTAFF 1000)
- Changing the target priority mode (F2) (PROSTAFF 1000)
- Measurement
- Technical notes
- Warranty
15
En
Fr
Changing the measurement display mode (F2) (PROSTAFF 1000i)
Horizontal distance mode and actual distance mode can be switched. Factory default setting is horizontal
distance mode.
1. Press the PWR button to turn on the Laser Rangefinder.
2. Press and hold the MODE button.
3. Press the MODE button once.
• You can now change the measurement display mode.
4. The setting switches every time you press the PWR button.
Horizontal distance mode
Actual distance mode
N/A
Actual
distance
Horizontal
distance
N/A
• If you press and hold the MODE button or do not operate the buttons for
about 8 seconds, the displayed setting is saved and the Laser Rangefinder
returns to standby.
• The setting is saved even when the Laser Rangefinder is turned OFF.