DIGITAL CAMERA Reference Guide • Read this document thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page 25). • After reading this document, keep it readily accessible for future reference.
When Your First Photo Can’t Wait ❚❚ Getting Ready 1 Insert the battery (0 77). For information on charging the battery, see “Charging the Battery” (0 72). 128GB 2 Insert a memory card (0 81). 3 Attach a lens (0 83). • Align the white dot on the lens with the white dot on the camera body (q) and rotate the lens in the direction shown (w). • A strap can be attached to the camera. For more information, see “Attaching the Strap” (0 71).
❚❚ Take (0 88) and View (0 97) Pictures 1 To focus, press the shutter-release button halfway (i.e., lightly press the shutter-release button, stopping when it is pressed halfway). 2 Without lifting your finger from the shutter-release button, press the button the rest of the way down to take the picture. 3 View the picture.
Package Contents Be sure all items listed here were included with your camera.
About This Document ❚❚ Symbols This document employs the following symbols. Use them to help locate the information you need. D A 0 This icon marks notes, information that should be read before using this product. This icon marks tips, additional information you may find helpful when using this product. This icon marks references to other sections in this document. ❚❚ Conventions • This camera uses CFexpress (Type B) and XQD memory cards.
Table of Contents When Your First Photo Can’t Wait .................................................................... 2 Package Contents ................................................................................................... 4 About This Document ........................................................................................... 5 For Your Safety .......................................................................................................25 Notices ...........................
Basic Photography and Playback 88 Taking Photographs ............................................................................................ 88 Shooting Videos ................................................................................................... 93 Playback ................................................................................................................... 97 Viewing Videos ............................................................................
ISO Sensitivity ...................................................................................................... 154 About ISO Sensitivity .............................................................. 154 Auto ISO Sensitivity Control ................................................. 156 White Balance ..................................................................................................... 158 About White Balance ..............................................................
Video Image Area Options ..............................................................................218 Points to Note When Filming Videos ..........................................................220 Recording HLG Video .......................................................................................223 View Assist ..................................................................................224 Recording N-Log Video .............................................................................
Deleting Pictures ................................................................................................ 259 Using the Delete Button ........................................................ 259 Deleting Multiple Pictures .................................................... 260 Creating Retouched Copies ........................................................................... 264 RAW Processing ........................................................................ 267 Trim .....................
Connecting to Smart Devices 311 The SnapBridge App .........................................................................................311 What SnapBridge Can Do for You ......................................312 Wireless Connections .......................................................................................313 Connecting via Bluetooth (Pairing) ...................................313 Connecting via Wi-Fi (Wi-Fi Mode) ....................................
Troubleshooting Wireless LAN and Ethernet Connections ................ 397 Problems and Solutions ......................................................... 397 Error Codes ................................................................................. 399 Connecting to Other Cameras 401 What Inter-camera Connections Can Do for You ................................... 401 Camera-Based Remote Photography (Synchronized Release) .....................................................
Optical AWL ..........................................................................................................453 Using Optical AWL with the SB-5000 or SB-500 ............454 Menu Guide 464 Defaults ..................................................................................................................464 Photo Shooting Menu Defaults ...........................................464 Video Recording Menu Defaults .........................................468 Custom Settings Menu Defaults ...
Active D-Lighting ....................................................................................... 512 Long Exposure NR...................................................................................... 514 High ISO NR .................................................................................................. 515 Vignette Control ......................................................................................... 516 Diffraction Compensation.............................................
Destination ...................................................................................................578 Video File Type ............................................................................................578 Frame Size/Frame Rate.............................................................................579 Image Area....................................................................................................579 ISO Sensitivity Settings.............................................
A Custom Settings: Fine-Tuning Camera Settings .............................. 593 Custom Settings Bank............................................................................... 597 Renaming Custom Settings Banks ..................................... 597 Copying Custom Settings Banks ........................................ 597 Restoring Default Settings .................................................... 597 a: Focus .....................................................................................
b3: Easy Exposure Compensation................................................613 b4: Matrix Metering Face Detection............................................613 b5: Center-Weighted Area..............................................................614 b6: Fine-Tune Optimal Exposure..................................................615 b7: Keep Exp. When f/ Changes....................................................616 c: Timers/AE Lock........................................................................
e: Bracketing/Flash.................................................................................... 637 e1: Flash Sync Speed ........................................................................ 637 e2: Flash Shutter Speed................................................................... 639 e3: Exposure Comp. for Flash ........................................................ 639 e4: Auto c ISO Sensitivity Control ............................................... 640 e5: Modeling Flash ...............
g2: Custom Controls .........................................................................674 Command Dials .........................................................................681 g3: Control Lock..................................................................................682 g4: Limit AF-Area Mode Selection ...............................................683 g5: Focus Mode Restrictions ..........................................................683 g6: AF Speed ...................................
B The Setup Menu: Camera Setup ............................................................... 706 Format Memory Card................................................................................ 708 Language ...................................................................................................... 708 Time Zone and Date.................................................................................. 709 Monitor Brightness ......................................................................
IPTC..................................................................................................................726 Creating, Renaming, Editing, and Copying Presets .....727 Deleting Presets ........................................................................727 Embedding Presets ..................................................................728 Copying Presets to a Memory Card ...................................728 Copying Presets to the Camera ...........................................
Save/Load Menu Settings ....................................................................... 748 Save Menu Settings ................................................................. 753 Load Menu Settings ................................................................ 753 Reset All Settings........................................................................................ 754 Firmware Version .......................................................................................
O My Menu/m Recent Settings ...................................................................775 O My Menu: Creating a Custom Menu ............................775 m Recent Settings: Accessing Recently-Used Settings ...................................................................................780 Troubleshooting 781 Before Contacting Customer Support ........................................................781 Problems and Solutions ...................................................................
Compatible Accessories .................................................................................. 840 Calibrating Batteries ................................................................ 850 Attaching a Power Connector and AC Adapter ............ 852 Software ................................................................................................................ 854 Caring for the Camera ......................................................................................
For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. After reading these safety instructions, keep them readily accessible for future reference. A DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury. A WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
Keep dry. Do not handle with wet hands. Do not handle the plug with wet hands. Failure to observe these precautions could result in fire or electric shock. Do not let your skin remain in prolonged contact with this product while it is on or plugged in. Failure to observe this precaution could result in low-temperature burns. Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire.
Do not handle the plug when charging the product or using the AC adapter during thunderstorms. Failure to observe this precaution could result in electric shock. Do not handle with bare hands in locations exposed to extremely high or low temperatures. Failure to observe this precaution could result in burns or frostbite. A CAUTION Do not leave the lens pointed at the sun or other strong light sources. Light focused by the lens could cause fire or damage to product’s internal parts.
Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction. Do not look directly at the AF-assist illuminator. Failure to observe this precaution could have adverse effects on vision. Do not transport cameras or lenses with tripods or similar accessories attached.
If battery liquid comes into contact with the eyes, rinse with plenty of clean water and seek immediate medical attention. Delaying action could result in eye injuries. Follow the instructions of airline personnel. Batteries left unattended at high altitudes in an unpressurized environment may leak, overheat, rupture, or catch fire. A WARNING (Batteries) Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention.
Notices • No part of the documentation included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the appearance and specifications of the hardware and software described in this documentation at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product.
• Cautions on certain copies and reproductions The government has issued cautions on copies or reproductions of securities issued by private companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except when a minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by public agencies and private groups, ID cards, and tickets, such as passes and meal coupons.
● Memory Cards • Memory cards may be hot after use. Observe due caution when removing • • • • • • 32 memory cards from the camera. Do not perform the following operations during formatting or while data are being recorded, deleted, or copied to a computer or other device. Failure to observe these precautions could result in loss of data or in damage to the camera or card. - Do not remove or insert memory cards. - Do not turn the camera off. - Do not remove the battery. - Do not disconnect AC adapters.
D Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Getting to Know the Camera and Its Menus Parts of the Camera Camera Body 1 2 3 4 5 6 7 8 9 8 14 13 1 2 3 4 5 6 7 34 12 11 Release mode dial lock release (0 145) BKT button (0 177) c button (0 429) Stereo microphone (for videos; 0 93) Video-record button (0 93) S (Q) button (0 154) E button (0 143) Parts of the Camera 10 Eyelet for camera strap (0 71) E (focal plane mark; 0 131) Control panel (0 41, 813) GNSS antenna (0 204) Accessory shoe (for optional flash unit; 0 423, 816) 13 I button (0 132)
1 2 3 4 5 6 7 13 14 15 16 17 18 8 19 20 21 1 2 3 4 5 6 7 8 9 12 Power switch (0 85, 88) Shutter-release button (0 88) AF-assist illuminator (0 90, 609) Red-eye reduction lamp (0 429) Self-timer lamp (0 152) M button (0 50, 713) Flash sync terminal cover Ten-pin remote terminal cover Cover for microphone, headphone, and Ethernet connectors Cover for USB and HDMI connectors Focus-mode button (0 110) 11 10 9 10 11 12 13 14 15 16 17 18 19 20 21 Battery chamber cover latch (0 77) Battery chamber cove
14 13 12 11 10 9 8 7 6 5 1 2 3 4 5 6 7 36 4 3 2 1 Microphone (for voice memos; 0 295) U button (0 158) T button (0 105) b button (0 295) Network indicator (0 360, 395) Monitor (0 53, 124) Speaker (0 99) Parts of the Camera 8 9 10 11 12 13 14 Eyepiece release (0 843) O (Q) button (0 101, 259) g (Fn4) button (0 192, 249) Release mode dial (0 145) Rubber eyecup (0 843) Viewfinder (0 46) Eye sensor (0 50)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 17 16 Diopter adjustment control (0 52) 2 DISP button (0 44, 48) 3 Photo/video selector (0 88, 93) 4 AF-ON button (0 128) 5 Sub-selector (0 123, 126, 141) 6 Main command dial (0 666) 7 i button (0 65, 241) 8 J button (0 60) 9 Multi selector (0 60) 10 X button (0 129, 228, 247) 11 G button (0 59, 464) 1 12 13 14 15 16 17 18 K button (0 97, 227) W (Q) button (0 63, 228, 247) AF-ON button for vertical shooting (0 128) Main command dial for vertical shooting (0 666) Mult
1 17 2 16 3 15 4 14 5 13 6 12 7 11 10 1 2 3 4 5 6 7 8 9 38 Lens release button (0 84) Lens mount (0 83, 131) CPU contacts Image sensor (0 858) Fn3 button Tripod socket Sub-command dial for vertical shooting (0 666) Shutter-release button lock for vertical shooting (0 92) Fn button for vertical shooting (0 143) Parts of the Camera 8 9 10 11 12 13 14 15 16 17 Security slot (for anti-theft cable; 0 40) S button for vertical shooting (0 154) Shutter-release button for vertical shooting Memory
D Do Not Touch the Image Sensor or Sensor Shield Under no circumstances should you poke or exert pressure on the image sensor or sensor shield (0 719) or subject them to powerful air currents from a blower. Failure to observe this precaution could scratch or otherwise damage the sensor or shield. For information on cleaning the image sensor, see “Image Sensor Cleaning” (0 858). A Notes on the Monitor The angle of the monitor can be adjusted.
A The GNSS Antenna If possible, stay in the open when using location data services. Keep the antenna pointed to the sky for best reception. A The LCD Illuminator Rotating the power switch to D activates the backlights for the buttons and control panel (LCD illuminator). The backlights will remain lit for a few seconds after the power switch is released. The backlights turn off when the switch is rotated to D a second time or the shutter-release button is pressed halfway.
The Control Panel The control panel lights when the camera is on. At default settings, the following indicators are displayed. For more information, see “Camera Displays” (0 802) in “Technical Notes”.
The Monitor At default settings, the following indicators appear in the monitor. For more information, see “Camera Displays” (0 802) in “Technical Notes”.
13 12 11 10 1 2 3 9 1 2 3 4 5 6 8 7 6 Exposure indicator Exposure (0 136) Exposure compensation (0 143) i icon (0 65, 241) Battery indicator (0 80) Number of exposures remaining (0 81, 887) ISO sensitivity (0 154) ISO sensitivity indicator (0 154) Auto ISO sensitivity indicator (0 156) 5 4 Aperture (0 134, 135) Shutter speed (0 133, 135) Metering (0 520) Touch shooting (0 124) Vibration reduction indicator (0 526) 12 Focus point (0 123) 13 View mode (photo live view; 0 624) 7 8 9 10 11 Parts of th
A Using the Monitor with the Camera in “Tall” Orientation When the camera is rotated to take pictures in “tall” (portrait) orientation, the display in the monitor rotates to match (photo mode only). A Choosing a Display Press the DISP button to cycle the shooting display. Choose from up to five displays, each with a customizable selection of icons and indicators. The items displayed can be selected using Custom Setting d17 [Custom monitor shooting display] (0 634).
❚❚ Video Mode 1 2 3 4 5 6 7 9 8 1 2 3 4 Recording indicator (0 93) “No video” indicator (0 94) Video recording time (0 93) Frame size and rate (0 216) Destination (0 578) 5 6 7 8 9 Time remaining (0 93) Image area (0 218) Video file type (0 214) Sound level (0 588) Microphone sensitivity (0 588) Parts of the Camera 45
The Viewfinder At default settings, the following indicators appear in the viewfinder. For more information, see “Camera Displays” (0 802) in “Technical Notes”.
11 10 9 8 7 1 2 3 4 6 Battery indicator (0 80) Number of exposures remaining (0 81, 887) ISO sensitivity (0 154) ISO sensitivity indicator (0 154) Auto ISO sensitivity indicator (0 156) 5 4 3 2 1 Exposure indicator Exposure (0 136) Exposure compensation (0 143) 6 Aperture (0 134, 135) 7 Shutter speed (0 133, 135) 8 Shooting mode (0 132) 9 Vibration reduction (0 526) 10 Metering (0 520) 11 Focus point (0 123) 5 Parts of the Camera 47
A Using the Viewfinder with the Camera in “Tall” Orientation When the camera is rotated to take pictures in “tall” (portrait) orientation, the display in the viewfinder rotates to match (photo mode only). A Choosing a Display Press the DISP button to cycle the shooting display. Choose from up to four displays, each with a customizable selection of icons and indicators. The items displayed can be selected using Custom Setting d18 [Custom viewfinder shooting display] (0 636).
❚❚ Video Mode 1 2 3 456 7 9 8 1 2 3 4 Recording indicator (0 93) “No video” indicator (0 94) Video recording time (0 93) Destination (0 578) Time remaining (0 93) 5 6 7 8 9 Frame size/frame rate (0 216) Image area (0 218) Video file type (0 214) Sound level (0 588) Microphone sensitivity (0 588) Parts of the Camera 49
❚❚ The Monitor Mode Button and the Eye Sensor Placing your eye to the viewfinder activates the eye sensor, switching the display from the monitor to the viewfinder. Note that the eye sensor will also respond to other objects, such as your fingers. • The viewfinder can be used for menus and playback if desired. • Press the M (monitor mode) button to cycle between viewfinder and monitor displays.
• Press the M button to cycle through the displays as follows. [Automatic display switch]: The camera automatically switches between the viewfinder and monitor displays based on information from the eye sensor. [Viewfinder only]: The monitor remains blank. The viewfinder is used for shooting, menus, and playback. [Monitor only]: The monitor is used for shooting, menus, and playback. The viewfinder display will remain blank even if you put your eye to the viewfinder.
D The Diopter Adjustment Control • The viewfinder can be focused by lifting and rotating the diopter adjustment control. • Be careful not to put your fingers or fingernails in your eye. • After adjusting diopter, push the diopter adjustment control back into its original position.
Touch Controls The touch-sensitive monitor offers a variety of controls that can be operated by touching the display with your fingers. During viewfinder photography, touch controls are disabled and cannot be used for focus or the like. ❚❚ Focusing and Releasing the Shutter • Touch the monitor to focus on the selected point (touch AF). • In photo mode, the shutter will be released when you lift your finger from the display (touch shutter).
• Tap Z or press J to select the chosen option and return to the previous display. ❚❚ Playback • Flick left or right to view other pictures during full-frame playback. • In full-frame playback, touching the bottom of the display brings up a frame-advance bar. Slide your finger left or right over the bar to scroll rapidly to other pictures. • To zoom in on a picture displayed during full-frame playback, use a stretch gesture or give the display two quick taps.
• Use slide gestures to view other parts of the picture during zoom. • Giving the display two quick taps while zoom is in effect cancels zoom. • To “zoom out” to a thumbnail view, use a pinch gesture during full-frame playback. Use pinch and stretch to choose the number of pictures displayed from 4, 9, and 72 frames. ❚❚ Viewing Videos • Videos are indicated by a 1 icon; to start playback, tap the on-screen guide. • Tap Z to exit to full-frame playback.
❚❚ The i Menu • Tap the i icon to display the i menu during shooting (0 65). • Tap items to view and change options. • You can choose the items displayed in the i menu (0 70). ❚❚ Text Entry • When a keyboard is displayed, you can enter text by tapping the keys. 1 2 1 2 3 Text display area Keyboard area Keyboard selection 3 • To position the cursor, tap e or f or tap directly in the text display area.
❚❚ Navigating the Menus • Slide up or down to scroll. • Tap a menu icon to choose a menu. • Tap menu items to display options. You can then choose the desired option by tapping icons or sliders. • To exit without changing settings, tap Z.
D Cautions: The Touch Screen • • • • • The touch screen responds to static electricity. It may not respond when touched with fingernails or gloved hands. For improved response when using the touch screen with gloves, select [ON] for [Touch controls] > [Glove mode] in the setup menu. Do not touch the screen with sharp objects. Do not use excessive force. The screen may not respond when covered with third-party protective films. The screen may not respond when touched simultaneously in multiple locations.
The Menus The G Button Press the G button to view the menus. C [PHOTO SHOOTING MENU] (0 491) 2 1 [VIDEO RECORDING MENU] (0 576) 9 3 A [CUSTOM SETTINGS MENU] (0 593) 4 D [PLAYBACK MENU] (0 692) 5 B [SETUP MENU] (0 706) 6 F [NETWORK MENU] (0 755) 7 O [MY MENU]/ m [RECENT SETTINGS]* (0 775) 8 d (help) icon (0 63) 9 Current settings * You can choose the menu displayed. The default is [MY MENU].
❚❚ Using the Menus You can navigate the menus using the multi selector and J button. 1 2 3 4 5 Move cursor up Select the highlighted item Display sub-menu, select highlighted item, or move cursor right Move cursor down Cancel and return to previous menu, or move cursor left 1 Highlight the icon for the current menu. Press 4 to place the cursor in the menu-selection area. 2 Select a menu. Press 1 or 3 to select the desired menu.
3 Position the cursor in the selected menu. Press 2 to position the cursor in the selected menu. 4 Highlight a menu item. Press 1 or 3 to highlight a menu item. 5 Display options. Press 2 to display options for the selected menu item.
6 Highlight an option. Press 1 or 3 to highlight an option. 7 Select the highlighted option. • Press J to save changes and exit. • To exit without making a selection, press the G button. • To exit the menus and return to shooting mode, press the shutter- release button halfway. D Grayed-Out Items 62 • Some items and menu options may be unavailable depending on camera status. Unavailable items are displayed in gray.
A ON/OFF Only Items If the only options available for the current item are [ON] and [OFF], you can switch from [ON] to [OFF] or vice versa simply by pressing J, pressing the multi selector right (2), or tapping the item in the display. A The d (Help) Icon • Where available, a description of the currently-selected item can be viewed by pressing the W (Q) button. • Press 1 or 3 to scroll. • Press W (Q) again to return to the menus.
A Text Entry A keyboard is displayed when text entry is required, for example if you are called on to enter a file name or the like. Enter text as described below. 1 Text display area 1 2 Keyboard area 3 Keyboard selection 2 3 • • • • • • • 64 Enter characters at the current cursor position by highlighting them with the multi selector arrow keys and then pressing J. To move the cursor left or right in the text display area, rotate the main command dial.
The i Button (the i Menu) For quick access to frequently-used settings, press the i button or tap the i icon to view the i menu. • Different menus are displayed in photo and video modes. • Options can be viewed by tapping items in the display or by highlighting items and pressing J; selections can then be made using the multi selector. • Items for which the camera displays an on- screen guide can be adjusted by highlighting them in the i menu and rotating a command dial.
D Grayed-Out Items Some items and menu options may be unavailable depending on camera status. Unavailable items are displayed in gray. A Using the i Menu with the Camera in “Tall” Orientation When the camera is rotated to take pictures in “tall” (portrait) orientation, the i menu for photo mode rotates to match.
❚❚ The Still Photography i Menu Pressing the i button during still photography displays the items listed below. Highlight the desired item using the multi selector and press J to view options. 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 10 11 12 Set Picture Control (0 192) White balance (0 158) Image quality (0 105) Image size (0 108) AF-area mode/subj.
❚❚ The Video i Menu Pressing the i button during video recording displays the items listed below. Highlight the desired item using the multi selector and press J to view options. 1 2 3 4 5 6 68 1 2 3 4 7 8 9 10 Set Picture Control (0 192) White balance (0 158) Frame size/frame rate (0 216) Microphone sensitivity (0 588) AF-area mode/subj.
❚❚ The Playback i Menu Pressing the i button during playback displays a context-sensitive i menu of playback options.
❚❚ Customizing the i Menu The items displayed in the i menu during shooting can be chosen using Custom Setting f1 or g1 [Customize i menu]. 1 Highlight Custom Setting f1 or g1 [Customize i menu] and press J. See “The G Button” (0 59) for information on using the menus. 2 Highlight the position you want to change and press J. A list of the items available for the selected position will be displayed. 3 Highlight the desired item and press J.
First Steps Attaching the Strap To attach a strap (whether the supplied strap or one that has been purchased separately): Attaching the Strap 71
Charging the Battery Charge the supplied EN-EL18d battery before use. D Caution: The Battery and Charger Read and follow the warnings and cautions in “For Your Safety” (0 25) and “Caring for the Camera and Battery: Cautions” (0 862). The Battery Charger • Before charging the battery, connect the EH-7P charging AC adapter to the MH-33 battery charger and plug it into a household power outlet. You can then insert the battery to begin charging.
• The charge lamps flash while charging is in progress and stop flashing as charging completes. Note that depending on the battery charge state, there may be a delay of about ten seconds before the lamps start flashing. • Insert the battery (terminals first), aligning the end of the battery with the guide and then sliding the battery in the direction indicated until it clicks into place. • Leave the charger in a location where it will remain stable and free from vibration during use.
D Caution: Charging EN-EL18d Batteries EN-EL18d rechargeable Li-ion batteries are not compatible with MH-26a or MH-26 battery chargers. Be sure to use the MH-33 when charging EN-EL18d batteries via a charger. D If the Charge Lamps Flash Rapidly If the charge lamps flash rapidly (8 times a second): • The battery was not inserted correctly: Unplug the charger and remove and reinsert the battery.
The Charging AC Adapter: Charging When inserted in the camera, the battery can be charged using the supplied EH-7P charging AC adapter. • After confirming that the camera is off, connect the charging AC adapter (q) and plug the adapter in. The battery will charge while the camera is off. Keep the plug straight during insertion and removal. • The camera charge lamp (w) lights amber while charging is in progress. The lamp turns off when charging is complete.
D Caution: Charging EN-EL18a/EN-EL18 Batteries The charging AC adapter cannot be used to charge EN-EL18a or EN-EL18 rechargeable Li-ion batteries. Use an MH-26a battery charger. D Caution: The Charging AC Adapter • If the battery cannot be charged using the charging AC adapter, for example because the battery is not compatible or the temperature of the camera is elevated, the charge lamp will flash rapidly for about 30 seconds and then turn off.
Inserting the Battery Turn the camera off before inserting or removing the battery. 1 Remove the BL-7 battery chamber cover. Lift the battery chamber cover latch, turn it to the open (A) position (q) and remove the battery chamber cover (w). 2 Attach the cover to the battery. • If the battery release is positioned so that the arrow (H) is visible, slide the battery release to cover the arrow (H). • Insert the two projections on the battery into the matching slots in the cover as shown.
3 Insert the battery. Insert the battery fully and securely as shown. 4 Latch the cover. • Rotate the battery chamber cover latch to the closed position (q) and fold it down as shown (w). • Be sure the cover is securely latched to prevent the battery from becoming dislodged during operation.
Removing the Battery Before removing the battery, turn the camera off, lift the battery chamber cover latch, and turn it to the open (A) position. D Removing the Battery Chamber Cover To unlatch the battery chamber cover so that it can be removed from the battery, slide the battery release in the direction indicated by the arrow (H) until it stops. D The Battery Chamber Cover • Use BL-7 battery chamber covers only; other battery chamber covers cannot be used with this camera.
Battery Level • The battery level is shown in the shooting display and control panel while the camera is on. Monitor Viewfinder Control panel • The battery level display changes as the battery level diminishes, from L through K, J, I, and H. When the battery level falls to H, suspend shooting and charge the battery or ready a spare battery. • If the message [Shutter release disabled. Recharge battery.] is displayed, charge or exchange the battery.
Inserting Memory Cards 128GB The camera is equipped with two memory card slots (Slots 1 and 2), allowing simultaneous use of two memory cards. • Turn the camera off before inserting or removing memory cards. • Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place. A Number of Exposures Remaining • The shooting display and control panel show the number of photographs that can be taken at current settings.
After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w). D Memory Card High-Temperature Warning As indicated on the inside of the memory card slot cover, memory cards inserted in the camera may become hot.
Attaching a Lens • The camera can be used with Z mount lenses. The lens generally used in this document for illustrative purposes is a NIKKOR Z 50mm f/1.8 S. • Be careful to prevent dust entering the camera. • Confirm that the camera is off before attaching the lens. - Remove the camera body cap (q, w) and rear lens cap (e, r). - Align the mounting marks on the camera (t) and lens (y). Do not touch the image sensor or lens contacts.
- Rotate the lens as shown until it clicks into place (u). • Remove the front lens cap before taking pictures. D F Mount Lenses • Be sure to attach the FTZ II/FTZ mount adapter (available separately) before using F mount lenses (0 844). • Attempting to attach F mount lenses directly to the camera could damage the lens or image sensor. Detaching Lenses • After turning the camera off, press and hold the lens release button (q) while turning the lens in the direction shown (w).
Camera Setup Turn the camera on, choose a language, and set the clock. Before using the camera for the first time, follow the steps below to choose a language and time zone and set the clock so that the correct time and date will be recorded with any pictures you take. 1 Press G, and in the setup menu highlight [Language] and press 2. For information on using the menus, see “Using the Menus” (0 60). 2 Select a language.
4 Choose a time zone. • Select [Time zone] in the [Time zone and date] display. • The display lists selected cities in the chosen zone and the difference between the time in the chosen zone and UTC. • Highlight a time zone in the [Time zone] display and press J. 5 Turn daylight saving time on or off. • Select [Daylight saving time] in the [Time zone and date] display. • Select [ON] (daylight saving time on) or [OFF] (daylight saving time off).
7 Choose a date format. • Select [Date format] in the [Time zone and date] display. • Highlight the desired date (year, month, and day) display order and press J. 8 Exit the menus. Lightly press the shutter-release button halfway to exit to shooting mode. D The t Icon A flashing t icon in the shooting display indicates that the camera clock has been reset.
Basic Photography and Playback Taking Photographs The basic steps involved in taking photographs are described below. D Lenses with Retractable Barrels Lenses with retractable barrels must be extended before use. Rotate the zoom ring as shown until the lens clicks into the extended position. 1 Select photo mode by rotating the photo/video selector to C.
2 Ready the camera. Holding the handgrip in your right hand and cradling the camera body or lens with your left, bring your elbows in against the sides of your chest. Landscape (wide) orientation Portrait (tall) orientation 3 Frame the photograph. Position the main subject near the center of the frame.
4 To focus, press the shutter-release button halfway (i.e., lightly press the shutter-release button, stopping when it is pressed halfway). • The focus point will be displayed in green when the camera focuses. If the camera is unable to focus, the focus point will flash red. • The AF-assist illuminator may light to assist the focus operation if the subject is poorly lit. • You can also focus by pressing the AF-ON button.
5 Without lifting your finger from the shutter-release button, press the button the rest of the way down to take the picture. D The Memory Card Access Lamp The memory card access lamp will light while the photograph is being recorded. Do not remove the memory card or battery. A The Touch Shutter You can also take a photograph by touching the monitor. Touch your subject to focus and lift your finger to release the shutter (0 124).
A Framing Photos in Portrait (“Tall”) Orientation The camera is equipped with controls for use in portrait (“tall”) orientation, including vertical shutter-release, S, Fn, AF-ON, and i buttons, main and sub-command dials, and a multi selector. • Rotate the vertical shooting shutter-release button lock to L to avoid accidentally operating these controls when the camera is in landscape (“wide”) orientation.
Shooting Videos The basic steps involved in shooting videos are described below. 1 Select video mode by rotating the photo/video selector to 1. Note that optional flash units cannot be used when the camera is in video mode. 2 Press the video-record button to start recording. • A recording indicator will be displayed in the monitor. The monitor also shows the time remaining, or in other words the approximate amount of new footage that can be recorded to the memory card.
• The camera can be refocused during recording by pressing the AF-ON button. • Sound is recorded via the video microphone. Do not cover the video microphone during recording. • You can also focus by tapping your subject in the monitor. 3 Press the video-record button again to end recording. D The Memory Card Access Lamp The memory card access lamp will light while the video is being recorded. Do not remove the memory card or battery. D The 0 Icon A 0 icon indicates that videos cannot be recorded.
D Cautions: Recording Videos • Video recording will end automatically if: - the maximum length is reached, - you choose a different shooting mode, - you switch modes using the photo/video selector, or - the lens is removed. • Sounds made by the camera may be audible in footage recorded: - during autofocus, - during vibration reduction, or - when power aperture is used.
D Cautions: Photography and Video Recording • You may notice the following in the shooting display.
Playback Press the K button to view photos and videos in the monitor or viewfinder after shooting. • Press 4 or 2 or flick left or right to view additional pictures. • Videos are indicated by a 1 icon. Tap the a icon in the display or press the J button to start playback. • To end playback and return to shooting mode, press the shutter- release button halfway.
Viewing Videos The video playback display and controls are described below. ❚❚ The Video Playback Display During video playback, the display shows the length of the video, the current playback position, and the other indicators listed below. Your approximate position in the video can also be ascertained from the video progress bar.
❚❚ Video Playback Controls The following operations can be performed while playback is in progress: Operation Pause Resume Rewind/advance Start slow-motion playback Jog rewind/advance Skip 10 s Skip 10 frames Description Press 3 to pause playback. Press the J button to resume playback when playback is paused or during rewind/advance. Press 4 to rewind, 2 to advance. Speed increases with each press, from 2× to 4× to 8× to 16×. Press 3 while the video is paused to start slowmotion playback.
Operation Zoom in Adjust volume Edit video Exit Resume shooting 100 Playback Description Press X to zoom in on the current frame while playback is paused. Press X to increase volume, W (Q) to decrease. To display video i menu, pause playback and press the i button. Press 1 or K to exit to full-frame playback. Press the shutter-release button halfway to return to shooting mode.
Deleting Unwanted Pictures Press the O (Q) button to delete the current picture. Note that pictures cannot be recovered once deleted. • Display a picture you want to delete and press the O (Q) button to display a confirmation dialog. Press the O (Q) button again to delete the picture and return to playback. • To exit without deleting the picture, press K.
Shooting Settings Image Recording Options (Image Area, Quality, and Size) Adjusting Image Area Settings At default settings, image area can be selected by holding the Fn2 button and rotating a command dial. • Image area settings can be displayed by selecting [Image area] in the photo shooting menu.
❚❚ Choose Image Area Choose the image area. The following options are available: Option c [FX (36×24)] a [DX (24×16)] m [1:1 (24×24)] Z [16:9 (36×20)] 1 2 FX (36×24) DX (24×16) Description Record pictures in FX format with an angle of view equivalent to a 35 mm format camera. Pictures are recorded in DX format. To calculate the approximate focal length of the lens in 35 mm format, multiply by 1.5. • Image-area selection is fixed at [DX (24×16)] when a DX lens is attached.
❚❚ DX Crop Alert If [ON] is selected for this option in the camera menus, the image area icon in the shooting display will flash when DX (24×16) is selected.
Adjusting Image Quality Choose the image quality option used when photographs are recorded. ❚❚ Choosing an Image Quality Option Hold the T button and rotate the main command dial. A The Photo Shooting Menu [Image Quality] Option Image quality can also be adjusted using the [Image quality] item in the photo shooting menu.
Option Description Record two copies of each photo: an NEF (RAW) [RAW + JPEG finem] picture and a JPEG copy. • For the JPEG copy, you can choose from options prioritizing image quality or file size. Choose [RAW + JPEG fine] options with a star (“m”) to maximize image quality. Choose options without a star (“m”) to ensure that the JPEG copies all have more or less [RAW + JPEG the same file size. normalm] • Only the JPEG copy is displayed during playback.
A NEF (RAW) • • NEF (RAW) files have the extension “*.nef”. The process of converting NEF (RAW) pictures to other highly-portable formats such as JPEG is referred to as “NEF (RAW) processing”. During this process, Picture Controls and settings such as exposure compensation and white balance can be freely adjusted. • The RAW data themselves are unaffected by NEF (RAW) processing and their quality will remain intact even if the pictures are processed multiple times at different settings.
Choosing an Image Size Choose a size for new JPEG pictures. The size for JPEG pictures can be selected from [Large], [Medium], and [Small]. ❚❚ Choosing an Image Size Hold the T button and rotate the sub-command dial. A The Photo Shooting Menu [Image Size] Item Image size can also be adjusted using the [Image size] item in the photo shooting menu.
The number of pixels in the picture varies with the option selected for image area (0 102). Image area [FX (36×24)] [DX (24×16)] [1:1 (24×24)] [16:9 (36×20)] Image size Large (8256 × 5504 pixels) Size when printed at 300 dpi Approx. 69.9 × 46.6 cm/ 27.5 × 18.3 in. Medium (6192 × 4128 pixels) Approx. 52.4 × 35.0 cm/ 20.6 × 13.8 in. Small (4128 × 2752 pixels) Large (5392 × 3592 pixels) Medium (4032 × 2688 pixels) Approx. 35.0 × 23.3 cm/ 13.8 × 9.2 in. Approx. 45.7 × 30.4 cm/ 18.0 × 12.0 in. Approx.
Focus Focus Mode Control how the camera focuses. ❚❚ Choosing a Focus Mode The focus mode can be selected by holding the focus-mode button and rotating the main command dial. A [Focus Mode] The focus mode can also be selected using the [Focus mode] items in the photo shooting and video recording menus.
Option Description • Use with stationary subjects. When you press the shutter-release button halfway to focus, the focus point will turn from red to green and focus will lock. If the camera fails to focus, the focus point AF-S [Single AF] will flash red and the shutter release will be disabled. • At default settings, the shutter can only be released if the camera is able to focus (focus priority). • Use for shots of athletes and other moving subjects.
D Cautions: Autofocus • The camera may be unable to focus if: - the subject contains lines parallel to the long edge of the frame, - the subject lacks contrast, - the subject in the focus point contains areas of sharply contrasting brightness, - the focus point includes night-time spot lighting or a neon sign or other light source that changes in brightness, - flicker or banding appears under fluorescent, mercury-vapor, sodiumvapor, or similar lighting, - a cross (star) filter or other special filter is us
AF-Area Mode Choose how the camera selects the focus point for autofocus. • In modes other than [Auto-area AF], the focus point can be positioned using the sub-selector (0 123) or multi selector. ❚❚ Choosing an AF-Area Mode To choose the AF-area mode, hold the focus-mode button and rotate the sub-command dial. A [AF-Area Mode] The AF-area mode can also be selected using the [AF-area mode] items in the photo shooting and video recording menus.
Option Description • • 3 [Pinpoint AF] • • d 114 Focus [Single-point AF] • • With a focus area smaller than that employed for single-point AF, pinpoint AF is used for pinpoint focus on a selected spot in the frame. Focusing may be slower than with single-point AF. Recommended for shots involving static subjects, such as buildings, in-studio product photography, or close-ups. This option is only available when photo mode is selected and [Single AF] is chosen for focus mode.
Option Description • d [Dynamicarea AF (S)] • • • e [Dynamicarea AF (M)] • • f [Dynamicarea AF (L)] • The camera focuses on a point selected by the user. If the subject briefly leaves the selected point, the camera will focus based on information from surrounding focus points. This option is only available when photo mode is selected and [Continuous AF] is chosen for focus mode. Use for photographs of athletes and other active subjects that are hard to frame using single-point AF.
Option Description • f [Wide-area AF (S)] • • • g [Wide-area AF (L)] • • • u 116 Focus As for single-point AF except that the camera focuses on a wider area. Choose for snapshots, subjects that are in motion, and other subjects that are difficult to photograph using single-point AF. During video recording, wide-area AF can be used for smooth focus when making panning or tilting shots or filming moving subjects.
Option Description • • n [Subjecttracking AF] h [Auto-area AF] Track focus on a selected subject. Position the reticle over the target and start tracking by pressing the shutter-release button halfway or by pressing J or AF-ON; the focus point will track the selected subject as it moves through the frame. To end tracking and select the center focus point, press J. • This option is only available in video mode. • The camera automatically detects the subject and selects the focus area.
A s: The Center Focus Point In all AF-area modes except [Auto-area AF], [3D-tracking], and [Subjecttracking AF], a dot appears in the focus point when it is in the center of the frame. A Quick Focus-Point Selection • For quicker focus-point selection, choose [Alternating points] for Custom Setting a4 [Focus points used] to use only a quarter of the available focus points. Selecting [Alternating points] does not affect the number of points available for [Pinpoint AF].
Choosing a Subject Type for Autofocus The class of subjects given priority during autofocus can be chosen using the [AF subject detection options] items in the photo shooting and video recording menus, which offer a choice of [Auto], [People], [Animal], [Vehicle], and [Subject detection off]. The subject detected by the camera is indicated by a focus point. • In the case of the video recording menu, the choice of subject is made via [AF subject detection options] > [Subject detection].
• If a dog, cat, or bird is detected when [Animal] is selected, the focus point will appear over the face of the animal in question (animal-detection AF). If the camera detects the subject’s eyes, the focus point will instead appear over one or the other of their eyes. If the camera can detect neither face nor eyes, it will display a focus point over the detected animal.
D Caution: Face/Eye-Detection AF Subject detection may not perform as expected if: • the subject’s face is too large or small relative to the frame, • the subject’s face is too brightly or dimly lit, • the subject is wearing glasses or sunglasses, • the subject’s face or eyes are obscured by hair or other objects, or • the subject moves excessively during shooting.
D Cautions: Vehicle-Detection AF • Subject detection may not perform as expected with subjects that are: - too large or small relative to the frame, - too bright or too dark, - partially hidden, - similar in color to surrounding objects, or - moving quickly. • The camera may fail to detect vehicles of some shapes and colors. Alternatively, it may display a border around subjects that are not vehicles.
Focus Point Selection Except when [Auto-area AF] is selected for AF-area mode, the focus point can be selected manually, allowing photographs to be composed with the subject positioned almost anywhere in the frame. • Use the multi selector to select the focus point while the standby timer is on. • Pressing J selects the center focus point. A The Sub-Selector • The sub-selector can be used for focus-point selection in place of the multi selector.
The Touch Shutter Touch the display to focus on the selected point. The shutter will be released when you lift your finger from the display. Tap the icon shown in the illustration to choose the operation performed by tapping the display. Option Description Touch the display to focus on the selected point and lift your finger to release the shutter. • When choosing an eye using touch controls, note that the camera may not focus on the eye on the side you intend.
Option Description • f [Position focus point] Touch the display to position the focus point. The camera will not focus and lifting your finger from the display will not release the shutter. • If [Subject-tracking AF] or [Auto-area AF] is selected for AF-area mode, focus will track the subject at the chosen point. Press J to end subject tracking. • Touch the display to focus on the selected point. Lifting your finger from the display does not release the shutter.
Focus Lock Use focus lock in cases in which the camera has trouble focusing with autofocus. • Use focus lock to lock focus on the current subject when AF-C is selected for focus mode. • When using focus lock, choose an AF-area mode other than [Autoarea AF]. 1 Position the subject in the selected focus point and press the shutter-release button halfway. 2 Press the center of the sub-selector. • Keeping the shutter-release button pressed halfway (q), press the center of the sub-selector (w) to lock focus.
3 Keeping the center of the sub-selector pressed, recompose the photograph and shoot. Do not change the distance between the camera and the subject. If the distance to the subject changes, release the lock and focus again at the new distance. D Locking Focus When AF-S Is Selected for Focus Mode Focus locks while the shutter-release button is pressed halfway. You can also lock focus by pressing the center of the sub-selector.
A Locking Focus with the AF-ON Button • The AF-ON button can be used for focus in place of the shutter-release button. • When [AF-ON only] is selected for Custom Setting a6 [AF activation], focus can be initiated only by pressing the AF-ON button; the camera will not focus when the shutter-release button is pressed halfway. Focus will remain locked after the AF-ON button is released. To end focus lock, press the AF-ON button again.
Manual Focus Manual focus is available in manual focus mode. Use manual focus when, for example, autofocus does not produce the desired results. • Position the focus point over your subject and rotate the focus or control ring until the subject is in focus. • For greater precision, press the X button to zoom in on the view through the lens.
• The focus indicator (I) in the shooting display can be used to confirm whether the subject in the selected focus point is in focus (electronic rangefinding). The focus point will also light green when the subject is in focus. 1 2 Focus distance indicator Focus indicator 1 2 Focus indicator (steady) (steady) (steady) (flashes) Description The subject is in focus. The focus point is in front of the subject. The focus point is behind the subject. The camera is unable to focus.
D Lenses with Focus-Mode Selection Manual focus mode can be chosen using focus-mode selection controls on the lens (where available). D The Focal Plane Mark and Flange-Back Distance Focus distance is measured from the focal plane mark (E) on the camera body, which shows the position of the focal plane inside the camera (q). Use this mark when measuring the distance to your subject for manual focus or macro photography.
Exposure Choosing a Shooting Mode To choose a shooting mode, hold the I button and rotate the main command dial. The selected option is shown in the shooting display and control panel. Mode P S A M 132 Exposure Description Use for snapshots and in other situations in Programmed which there is little time to adjust camera auto (0 133) settings. The camera chooses both shutter speed and aperture automatically. ShutterUse to freeze or blur motion.
❚❚ P (Programmed Auto) • In this mode, the camera automatically adjusts shutter speed and aperture according to a built-in program to ensure optimal exposure in most situations. • Different combinations of shutter speed and aperture that produce the same exposure can be selected by rotating the main command dial (“flexible program”). - While flexible program is in effect, a flexible program indicator (U) is displayed.
❚❚ A (Aperture-Priority Auto) • In aperture-priority auto, you choose the aperture while the camera automatically adjusts shutter speed for optimal exposure. • Aperture can be adjusted by rotating the sub-command dial. • The minimum and maximum values for aperture vary with the lens. • Aperture can be locked at the selected value (0 665, 682).
❚❚ M (Manual) • You control both shutter speed and aperture. Choose this mode for long time-exposures of such subjects as fireworks or the night sky (“Bulb” or “Time” photography, 0 138). • Shutter speed and aperture can be adjusted with reference to the exposure indicators by rotating the command dials. • Rotate the main command dial to choose the shutter speed. Shutter speed can be set to values between 1/32000 s and 30 s or to “Bulb” or “Time”.
D Exposure Indicators The exposure indicators in the monitor, viewfinder, and control panel show whether the photograph would be under- or over-exposed at current settings.
A Extended Shutter Speeds For shutter speeds as slow as 900 s (15 minutes), select [ON] for Custom Setting d5 [Extended shutter speeds (M)]. A Long Exposures At speeds slower than 1 s, the shutter speed displayed by the camera may differ from the actual exposure time. The actual exposure times at shutter speeds of 15 and 30 seconds, for example, are respectively 16 and 32 seconds. The exposure time will again match the selected shutter speed at speeds of 60 seconds and slower.
Long Time-Exposures (Mode M Only) The camera offers two options for long time-exposures: “Bulb” and “Time”. Long time-exposures can be used for pictures of fireworks, night scenery, the stars, or moving lights. A 35-second exposure shot at a shutter speed of “Bulb” and an aperture of f/25 Shutter speed Description Bulb The shutter remains open while the shutter-release button is held down.
3 Rotate the main command dial to choose a shutter speed of Bulb (“Bulb”) or Time (“Time”). Bulb Time Note that the exposure indicators are not displayed at a shutter speed of Bulb or Time. 4 Focus and start the exposure. • “Bulb”: Press the shutter-release button all the way down to start the exposure. Keep the shutter-release button pressed during the exposure. • “Time”: Press the shutter-release button all the way down to start the exposure. 5 End the exposure.
D Long Time-Exposures • Note that “noise” (bright spots, randomly-spaced bright pixels or fog) may be present in long exposures. • Bright spots and fog can be reduced by choosing [ON] for [Long exposure NR] in the photo shooting menu. • Nikon recommends using a fully-charged battery, the supplied charging AC adapter, or an optional AC adapter and power connector to prevent loss of power during long exposures.
Autoexposure Lock Use autoexposure lock to recompose photographs after setting exposure for a specific area of the subject. Exposure lock comes in handy when the area used to set exposure is much brighter or darker than its surroundings. 1 With the subject positioned in the selected focus point and the shutterrelease button pressed halfway, press the center of the sub-selector to lock exposure.
2 Keeping the center of the sub-selector pressed, recompose the photograph and shoot. A Locking Exposure with the Shutter-Release Button If [On (half press)] is selected for Custom Setting c1 [Shutter-release button AE-L], exposure will lock while the shutter-release button is pressed halfway. A Metered Area • With [Spot metering], exposure will be locked at the value metered in a circle centered on the current focus point.
Exposure Compensation Exposure compensation is used to alter exposure from the value suggested by the camera. It can be used to make pictures brighter or darker. −1 EV No exposure compensation +1 EV ❚❚ Adjusting Exposure Compensation Hold the E button and rotate a command dial. • Choose from values between –5 EV (underexposure) and +5 EV (overexposure). Values between –3 EV and +3 EV are available in video mode. • At default settings, changes to exposure compensation are made in increments of 1/ EV.
• E icons and exposure indicators appear in the shooting display and control panel. In modes other than M, the zero (“0”) at the center of the exposure indicator flashes. The current value for exposure compensation can be confirmed by pressing the E button. Monitor Viewfinder Control panel • Normal exposure can be restored by setting exposure compensation to ±0.0. Exposure compensation is not reset when the camera is turned off.
Release Mode Choosing a Release Mode To choose the operation performed when the shutter-release button is pressed all the way down, hold the release mode dial lock release and rotate the release mode dial. • Stop when the pointer aligns with the desired setting. Mode U Single frame V Continuous low-speed W Continuous high-speed Description The camera takes one photograph each time the shutter-release button is pressed.
Mode E c Description Take pictures with the self-timer (0 152). Hold the c button and rotate the main command Quick release- dial to select the release mode (0 148). mode • Quick release-mode selection can be used to selection choose high-speed frame capture modes with frame rates of 30 or 120 fps (0 149). Self-timer D Frame Advance Rate • The frame rates for continuous low-speed and continuous high-speed modes can also be selected using Custom Setting d1 [Continuous shooting speed].
D Cautions: Burst Photography • Depending on shooting conditions and memory card performance, the memory card access lamp may light for anywhere from a few tens of seconds to around a minute. Do not remove the memory card while the memory card access lamp is lit. Not only could any unrecorded pictures be lost, but the camera or memory card could be damaged. • At shutter speeds slower than 1/250 s, the shooting display does not update in real time during burst photography.
❚❚ Quick Release-Mode Selection With the release mode dial rotated to c, you can choose a release mode by holding the c button and rotating the main command dial. • Settings for the selected mode can be adjusted by holding the c button and rotating the sub-command dial. • High-speed frame capture modes with frame advance rates of 30 or 120 fps are available only when the release mode dial is rotated to c (0 149).
High-Speed Frame Capture (C30/C120) For high-speed burst photography at frame rates of 30 or 120 fps, set the release mode dial to c and then hold the c button and rotate the main command dial to choose [C30] or [C120]. • The maximum length for bursts taken in these modes is approximately four seconds.
• Photos can be taken at the following settings: Option Shutter speed [Image area] [Image quality] [Image size] C30 1/ 32000 to 1/ 60 s 1/ C120 1/ 125 s 32000 to [FX (36×24)] or [FX (36×24)] only [DX (24×16)] [JPEG normal] only [Large] only [Small] only • The upper limit for ISO sensitivity is ISO 25600, even when higher values (Hi 0.3 through Hi 2.0) are selected. • Pictures are recorded in JPEG format.
D High-Speed Frame Capture: Restrictions High-speed frame capture cannot be combined with some camera features, including: • flexible program, • photo flicker reduction, • flash photography, • bracketing, • multiple exposures, • HDR overlay, • interval-timer photography, • time-lapse video recording, and • focus shift.
Using the Self-Timer (E) In self-timer mode, pressing the shutter-release button all the way down starts a timer, and a photo is taken when the timer expires. 1 Rotate the release mode dial to E (self-timer mode). Hold the release mode dial lock release and rotate the release mode dial to E. 2 Frame the photograph and focus. The timer will not start if the shutter cannot be released, as may be the case, for example, if the camera is unable to focus when AF-S is selected for focus mode. 3 Start the timer.
A Setting the Timer To choose the timer duration, press and hold the c button and rotate a command dial.
ISO Sensitivity About ISO Sensitivity The camera’s sensitivity to light (ISO sensitivity) can be adjusted according to the amount of light available. In general, choosing higher values allows faster shutter speeds at the same aperture. Choose from settings of from ISO 64 to 25600. Extended settings of from about 0.3 to 1 EV (ISO 32 equivalent) below ISO 64 and 0.3 to 2 EV (ISO 102400 equivalent) above ISO 25600 are also available.
A The Photo Shooting Menu [ISO Sensitivity Settings] Option ISO senstivity can also be adjusted using the [ISO sensitivity settings] item in the photo shooting menu. A Hi 0.3–Hi 2.0 A setting of [Hi 0.3] corresponds to an ISO sensitivity approximately 0.3 EV higher than ISO 25600 (ISO 32000 equivalent) and [Hi 2.0] to an ISO sensitivity approximately 2 EV higher (ISO 102400 equivalent).
Auto ISO Sensitivity Control Auto ISO sensitivity control automatically adjusts ISO sensitivity if optimal exposure cannot be achieved at the value selected by the user. You can select an upper limit for auto ISO sensitivity control (100–Hi 2.0) to prevent ISO sensitivity being raised too high. ❚❚ Enabling Auto ISO Sensitivity Control • Hold the S button and rotate the sub- command dial to select from ISO AUTO (auto ISO sensitivity control enabled) and ISO (auto ISO sensitivity control disabled).
D Cautions: Auto ISO Sensitivity Control • If the value currently selected for [ISO sensitivity] is higher than that chosen for [Maximum sensitivity], the value chosen for [ISO sensitivity] will serve as the upper limit for auto ISO sensitivity control. • During flash photography, shutter speed is limited to the range defined by the values selected for Custom Settings e1 [Flash sync speed] and e2 [Flash shutter speed].
White Balance About White Balance White balance ensures that colors appear natural regardless of the color of the light source. The default setting (4) is suitable for use with most light sources, but if it fails to produce the desired results, other settings can be selected according to the weather or light source. ❚❚ Adjusting White Balance To choose a white balance option, hold the U button and rotate the main command dial. The selected option is shown by an icon in the shooting display.
Option 4 [Auto] i [Keep white (reduce warm colors)] j [Keep overall atmosphere] k [Keep warm lighting colors] Color temperature * Description The camera adjusts white balance for optimal results with most light sources. If an optional flash unit is used, white balance will be adjusted in accord with the conditions in effect when the flash fires. Approx. 3500– Eliminate the warm color cast 8000 K produced by incandescent lighting. Approx.
Option I [Fluorescent] [Cool-white fluorescent] [Day white fluorescent] [Daylight fluorescent] 5 [Flash] K [Choose color temperature] Color temperature * Description Approx. 4200K Use under fluorescent lighting; choose Approx. 5000K bulb type according to light source. Approx. 6500K Approx. 5400K Use for flash photography. Direct color-temperature selection. Approx. 2500– • To choose a color temperature, hold 10000K the U button and rotate the subcommand dial.
D D [Natural Light Auto] D [Natural light auto] may not produce the desired results under artificial light. Choose 4 [Auto] or an option that matches the light source. D Studio Flash Lighting 4 [Auto] may not produce the desired results with large studio flash units. Use preset manual white balance or set white balance to 5 [Flash] and use fine-tuning to adjust white balance.
A The [White Balance] Options White balance can also be adjusted from the photo shooting and video recording menus. A Color Temperature The perceived color of a light source varies with the viewer; some may have a red cast while others appear blue. Color temperature is an objective measure of the color of a light source, expressed in Kelvins (K). The lower the color temperature, the redder the cast (q); the higher the temperature, the bluer the cast (w).
Fine-Tuning White Balance 1 Select [White balance] in the photo shooting menu, highlight the desired option, and press 2 as often as necessary to display fine-tuning options. For information on fine-tuning [Preset manual] white balance, see “Fine-Tuning Preset Manual White Balance” (0 176). 2 Fine-tune white balance. • Use the multi selector to position the cursor on the grid. The cursor can be moved up to six steps from the center along either of the A (amber)–B (blue) and G (green)–M (magenta) axes.
3 Save changes. • Press J to save changes and exit to the menus. • If white balance has been fine-tuned, an asterisk (“U”) will appear in the white balance icon.
A The i Menu Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. If an option other than K [Choose color temperature] is highlighted, fine-tuning options can be displayed by pressing 3. Any changes to fine-tuning options can be previewed in the display. G Increase green B Increase blue A Increase amber M Increase magenta • Tap the arrows in the display or use the multi selector to fine-tune white balance.
A The Information Display To choose a white balance setting using the command dials, press the U button while shooting information is displayed. The selected setting can be fine-tuned using the multi selector while the U button is pressed. A White Balance Fine-Tuning The colors on the fine-tuning axes are relative, not absolute. Selecting more of a color on a given axis does not necessarily result in that color appearing in pictures.
Choosing a Color Temperature ❚❚ Using the Menus Choose a color temperature by entering values for the A (amber)–B (blue) and G (green)–M (magenta) axes. 1 Select [White balance] in the photo shooting menu, then highlight K [Choose color temperature] and press 2. 2 Choose a color temperature. • Press 4 or 2 to highlight digits on the amber (A)–blue (B) axis and press 1 or 3 to change. • Press 4 or 2 to highlight the value for the green (G)–magenta (M) axis and press 1 or 3 to change. 3 Save changes.
❚❚ Using Buttons (Amber–Blue Only) To adjust color temperature when [Choose color temperature] is selected for white balance, hold the U button and use the multi selector or rotate the sub-command dial. • Hold the U button and rotate the sub-command dial to choose a color temperature in mireds. • To highlight a digit, hold the U button and press 4 or 2. Press 1 or 3 to edit the highlighted digit. • Changes apply only to the A (amber)–B (blue) axis.
A The i Menu Pressing J when [White balance] is highlighted in the i menu displays a list of white balance options. When K [Choose color temperature] is highlighted, color temperature options can be viewed by pressing 3. Value for Amber–Blue axis Value for Green– Magenta axis • Press 4 or 2 to highlight digits on the A–B (amber–blue) axis. You can also highlight the G–M (green–magenta) axis. • Press 1 or 3 to edit the selected item. • Press J to save changes and return to the i menu.
Preset Manual White balance settings such as 4 [Auto], J [Incandescent], and K [Choose color temperature] may fail to produce the desired results under mixed lighting or lighting with a strong color cast. Should this occur, white balance can be set to a value measured under the light source used in the final photograph.
❚❚ Direct Measurement The camera can store up to six values for preset manual white balance. 1 Hold the U button and rotate the main command dial to select L. 2 Select a preset. Hold the U button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed. 3 Select direct measurement mode. • Release the U button briefly and then press the U button until the L icon in the monitor starts to flash. • A white balance target (r) will appear in the center of the frame.
4 Position the white balance target (r) over a white or gray object and measure a value for preset manual white balance. • Position the target (r) using the multi selector. • To measure white balance, press the shutter-release button all the way down or press J. • You can also position the target (r) and measure white balance by tapping the display. • Target selection will not be available if an optional flash unit is attached.
D The Preset Manual White Balance Menu The preset manual white balance menu can be accessed by selecting [White balance] > L [Preset manual] in the photo shooting menu. The preset manual white balance menu offers options for copying values for preset manual white balance from an existing photograph or adding comments to or protecting white balance presets. D Protected Presets White balance presets indicated by g icons are protected and cannot be changed.
❚❚ Copying White Balance from a Photograph Follow the steps below to copy a value for white balance from an existing photograph to a selected preset. 1 Select [White balance] in the photo shooting menu, then highlight [Preset manual] and press 2. 2 Select a destination. • Using the multi selector, highlight the destination preset (d-1 to d-6). • Press X to view the preset manual white balance menu. 3 Choose [Select picture].
4 Highlight the source picture. • Highlight the desired picture using the multi selector. • To view the highlighted picture full frame, press and hold the X button. 5 Copy white balance. • Press J to copy the white balance value for the highlighted photograph to the selected preset. • If the highlighted photograph has a comment, the comment will be copied to the comment for the selected preset.
A Fine-Tuning Preset Manual White Balance The selected preset can be fine-tuned by selecting [Fine-tune] in the preset manual white balance menu. A “Edit Comment” To enter a descriptive comment of up to 36 characters for the current white balance preset, select [Edit comment] in the preset manual white balance menu. Enter a comment as described in “Text Entry” (0 64). A “Protect” To protect the current white balance preset, select [ON] for [Protect] in the preset manual white balance menu.
Bracketing Bracketing automatically varies exposure, flash level, Active D-Lighting (ADL), or white balance slightly with each shot, “bracketing” the current value. Bracketing can be used in situations in which getting the right settings is difficult and there is not time to check results and adjust settings with each shot, or to experiment with different settings for the same subject.
Exposure and Flash Bracketing Vary exposure and/or flash level over a series of photographs. To perform exposure and/or flash bracketing: No exposure compensation −1 EV +1 EV 1 Choose the number of shots. • Hold the BKT button and rotate the main command dial to choose the number of shots in the bracketing sequence. • At settings other than [0F], a bracketing icon and indicator will appear in the shooting display and control panel.
2 Select an exposure increment. • Hold the BKT button and rotate the sub-command dial to choose the exposure increment. • When [1/3 step] is selected for Custom Setting b2 [EV steps for exposure cntrl], the size of the increment can be chosen from 0.3 (1/3), 0.7 (2/3), 1.0, 2.0, and 3.0 EV. Bracketing programs with an increment of 2.0 or 3.0 EV offer a maximum of 5 shots. If a value of 7 or 9 was selected in Step 1, the number of shots will automatically be set to 5.
3 Take pictures. • Take the number of pictures in the bracketing program. • The modified values for shutter speed and aperture are shown in the display. • While bracketing is in effect, the shooting display shows a bracketing icon, a bracketing progress indicator, and the number of shots remaining in the bracketing sequence. After each shot, a segment will disappear from the indicator and the number of shots remaining will be reduced by one. No. shots: 3 Increment: 0.
A Bracketing Options When [AE & flash bracketing] is selected, the camera varies both exposure and flash level. Select [AE bracketing] to vary only exposure, [Flash bracketing] to vary only flash level. Note that flash bracketing is available in i-TTL and, where supported, auto aperture (qA) flash control modes only (0 425, 816). A Exposure and Flash Bracketing • [Number of shots] and [Increment] can also be selected via the [Auto bracketing] item in the photo shooting menu.
A Exposure Bracketing The settings (shutter speed and/or aperture) altered during exposure bracketing vary with the shooting mode. Mode Setting P S Shutter speed and aperture 1 Aperture 1 A M Shutter speed 1 Shutter speed 2, 3 1 If [ON] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu, the camera will automatically vary ISO sensitivity for optimum exposure when the limits of the camera exposure system are exceeded.
White Balance Bracketing The camera creates multiple copies of each photograph, each with a different white balance. To use white balance bracketing: 1 Choose the number of shots. • Hold the BKT button and rotate the main command dial to choose the number of shots in the bracketing sequence. • At settings other than [0F], a bracketing icon and indicator will appear in the shooting display and control panel.
2 Select a white balance increment. • Hold the BKT button and rotate the sub-command dial to choose the white balance increment. • The size of the increment can be chosen from 1 (1 step), 2 (2 steps), or 3 (3 steps). • Each step is equivalent to 5 mired. Higher “A” values correspond to increased amounts of amber. Higher “B” values correspond to increased amounts of blue. • The bracketing programs with an increment of 1 are listed below. Control panel 184 White balance bracketing indicator No.
3 Take pictures. • Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. • Modifications to white balance are added to the white balance adjustment made with white balance fine-tuning. • If the number of shots in the bracketing program is greater than the number of exposures remaining, the shutter release will be disabled. Shooting can begin when a new memory card is inserted.
❚❚ Cancelling Bracketing To cancel bracketing, press the BKT button and rotate the main command dial until the number of shots in the bracketing sequence is zero (0F). The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (0 209), although in this case the bracketing program will not be restored the next time bracketing is activated.
ADL Bracketing The camera varies Active D-Lighting (ADL) over a series of exposures. To use ADL bracketing: 1 Choose the number of shots. • Hold the BKT button and rotate the main command dial to choose the number of shots in the bracketing sequence. • At settings other than [0F], a bracketing icon and indicator will appear in the shooting display and control panel.
• The number of shots determines the bracketing sequence: No. of shots Bracketing sequence 2 [Off] → Value selected in Step 2 3 [Off] → [Low] → [Normal] 4 [Off] → [Low] → [Normal] → [High] [H1] 5 [H2] [Off] → [Low] → [Normal] → [High] → [Extra high 1] [Low] → [Normal] → [High] → [Extra high 1] → [Extra high 2] • If you selected 5 shots, you can choose from bracketing sequences [H1] and [H2] by holding the BKT button and rotating the subcommand dial.
2 Choose the Active D-Lighting amount. • Hold the BKT button and rotate the sub-command dial to choose the Active D-Lighting setting for the second shot when the number of shots in the bracketing sequence is 2.
3 Take pictures. • Take the number of pictures in the bracketing program. • While bracketing is in effect, the shooting display shows an ADL bracketing icon and the number of shots remaining in the bracketing sequence. After each shot, the number of shots remaining will be reduced by one. • The control panel shows a M icon and a bracketing progress indicator. A segment disappears from the indicator after each shot. No.
❚❚ Cancelling Bracketing To cancel bracketing, press the BKT button and rotate the main command dial until the number of shots in the bracketing sequence is zero (0F). The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (0 209), although in this case the bracketing program will not be restored the next time bracketing is activated.
Picture Controls About Picture Controls Choose image processing (“Picture Control”) options for new photos according to the scene or your creative intent. ❚❚ Choosing a Picture Control At default settings, Picture Controls can be selected by holding the g (Fn4) button and rotating the main command dial. The selected option is shown by an icon in the shooting display.
Option Description n [Auto] The camera automatically adjusts hues and tones based on the [Standard] (photo mode) or [Neutral] (video mode) Picture Control. Q [Standard] Standard processing for balanced results. Recommended for most situations. R [Neutral] S [Vivid] T [Monochrome] o [Portrait] p [Landscape] q [Flat] Minimal processing for natural results. Choose for photographs that will later be processed or retouched. Pictures are enhanced for a vivid, photoprint effect.
D “Set Picture Control” • Picture Controls can also be selected using the [Set Picture Control] items in the photo shooting and video recording menus. • The [Set Picture Control] item in the video recording menu also offers a [Same as photo settings] option that sets the Picture Control for videos to the same as that used for photographs.
Modifying Picture Controls Picture Controls can be adapted to suit the scene or the photographer’s creative intent. 1 Select a Picture Control. Select [Set Picture Control] in the photo shooting or video recording menu and then highlight the desired Picture Control and press 2. 2 Adjust settings. • Press 1 or 3 to highlight settings. Press 4 or 2 to choose a value in increments of 1, or rotate the sub-command dial to choose a value in increments of 0.25.
❚❚ Picture Control Settings Option [Effect level] [Quick sharp] [Sharpening] [Mid-range sharpening] [Clarity] [Contrast] [Brightness] [Saturation] [Hue] [Filter effects] 196 Description Mute or heighten the effect of Creative Picture Controls. Use [Quick sharp] to quickly adjust levels for balanced [Sharpening], [Mid-range sharpening], and [Clarity]. These parameters can also be adjusted individually. Control the sharpness of details and outlines.
D The j Indicator The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. D [A] (Auto) • Selecting the A (auto) option available for some settings lets the camera adjust the setting automatically. • Results vary with exposure and the position of the subject in the frame.
A The i Menu Highlighting [Set Picture Control] in the i menu and pressing J displays a Picture Control list. Highlight a Picture Control and press 3 to edit settings while previewing the effect in the display. • Press 1 or 3 to highlight settings. Press 4 or 2 to choose a value in increments of 1, or rotate the sub-command dial to choose a value in increments of 0.25. • The options available vary with the Picture Control selected.
Custom Picture Controls Save modified Picture Controls as custom Picture Controls. Option [Rename] Description Create a new custom Picture Control based on an existing preset or custom Picture Control, or edit existing custom Picture Controls. Rename custom Picture Controls. [Delete] [Load/save] Delete custom Picture Controls. Copy custom Picture Controls to and from a memory card.
3 Select a Picture Control. • Highlight an existing Picture Control and press 2 to display edit options. • To save a copy of the highlighted Picture Control without further modification, press J. [Save as] options will be displayed; proceed to Step 5. 4 Adjust settings. • The options and procedure are the same as for [Set Picture Control]. • Press J to display [Save as] options when settings are complete. • To abandon any changes and start over from default settings, press the O (Q) button.
6 Name the Picture Control. • Pressing 2 when a destination is highlighted in the previous step displays the [Rename] text-entry dialog. • The default name, created by adding a two-digit number to the name of the existing Picture Control, appears in the text display area. The two-digit number is generated automatically by the camera. • Custom Picture Control names can be up to nineteen characters long. • For information on text entry, see “Text Entry” (0 64). 7 Press the X button. • Text entry will end.
D The Original Picture Control Icon The original preset Picture Control on which the custom Picture Control is based is indicated by an icon in the edit display. D Custom Picture Control Options The options available with custom Picture Controls are the same as those on which the custom Picture Control was based.
D Sharing Custom Picture Controls The [Load/save] item in the [Manage Picture Control] menu can be used to copy custom Picture Controls from the camera to a memory card. You can also delete custom Picture Controls or copy them from a memory card to the camera (the memory card must be inserted in Slot 1, as memory cards inserted in Slot 2 will not be detected). • [Copy to camera]: Copy (import) custom Picture Controls from the memory card to the camera.
Location Data The built-in location data unit records the camera’s current latitude, longitude, and altitude, together with the current time (Coordinated Universal Time, or UTC). Location data embedded in pictures can be viewed in the location data page of the playback photo info display (0 238). Location Data Options To enable or disable the location data function or adjust location data settings, highlight [Location data (built-in)] in the setup menu and press 2.
Option [Log list] [Position] Description List track logs by date. • Where multiple logs were recorded on the same day, an identifier appears after the date. • The camera can store up to 100 track logs. • To delete a log, highlight it and press O (Q). View the latitude, longitude, altitude, and Coordinated Universal Time (UTC) currently reported by the built-in location data unit. UTC data are provided by the built-in location data unit independently of the camera clock.
D Cautions: Location Data • • • • • • • • 206 Turning the camera off does not disable the location data function. The location data function can be disabled by selecting [OFF] for [Location data (built-in)] > [Record location data] in the setup menu. The location data recorded with videos are those reported at the start of recording.
D Cautions: Track Logs • Track logs will not be recorded if the camera clock is not set or if no memory card is inserted. • To prevent logs being interrupted, be sure the camera battery is fully charged. • Tracking ends if: - the camera battery runs low, - the battery is removed, or - [OFF] is selected for [Location data (built-in)] > [Record location data]. • Location data will not be logged while the camera is unable to acquire a satellite signal.
A SnapBridge • You can also use the SnapBridge app to download location data to the camera from a smartphone or tablet (smart device) via a wireless link even when location data cannot be acquired using the camera’s built-in location data unit. See SnapBridge online help for details. • Location data downloaded from the smart device will be recorded with pictures even if [OFF] is selected for [Location data (built-in)] > [Record location data].
Two-Button Reset The camera settings listed below can be restored to default values by pressing the two buttons marked with green I dots (BKT and E) at the same time and holding them for over two seconds (the shooting display and control panel turn off briefly while settings are reset). Photo Shooting Menu With the exceptions of multiple exposure, interval timer, time-lapse video, and focus shift, only settings in the current shooting menu bank are affected.
Option Set Picture Control Active D-Lighting Photo flicker reduction Default Auto Off OFF Metering Focus mode Matrix metering Single AF AF-area mode Auto bracketing Single-point AF Off 1 Multiple exposure HDR overlay Off 2 Off 3 1 The number of shots is reset to zero. The bracketing increment for exposure, flash, and white balance bracketing is reset to 1. The amount for the second shot in two-shot ADL bracketing programs is reset to [Auto].
Video Recording Menu Option ISO sensitivity settings Maximum sensitivity Auto ISO control (mode M) Default 25600 ON ISO sensitivity (mode M) White balance 100 Same as photo settings Set Picture Control HLG quality Same as photo settings Quick sharp Contrast 0 0 Saturation Hue 0 0 Active D-Lighting Focus mode AF-area mode Electronic VR Off Full-time AF Single-point AF OFF Two-Button Reset 211
Custom Settings Menu Option a9 [Focus mode restrictions] Default No restrictions d8 [View mode (photo Lv)] d9 [Starlight view (photo Lv)] Show effects of settings OFF d10 [Warm display colors] e2 [Flash shutter speed] f4 [Control lock] [Shutter speed lock] OFF [Aperture lock] [Focus-point lock] OFF OFF g3 [Control lock] [Shutter speed lock] OFF [Aperture lock] [Focus-point lock] OFF OFF g5 [Focus mode restrictions] 212 OFF 1/60 s Two-Button Reset No restrictions
Other Settings Focus point Option Default Center Preset focus point Shooting mode Center P Flexible program Exposure compensation Off Off (0.0) AE lock (hold) Flash mode Off Fill flash Flash compensation FV lock Off (0.
Video Recording Video File Types Use [Video file type] in the video recording menu to choose the video file type. • You have a choice of MOV and MP4 formats. Option [ProRes 422 HQ 10-bit (MOV)] [H.265 10-bit (MOV)] [H.265 8-bit (MOV)] [H.264 8-bit (MP4)] 214 Video File Types Description Choose for footage destined for editing post-production. • You have a choice of two tone modes: [SDR] and [N-Log]. • Footage is recorded using All-I inter-frame compression. • Audio is recorded in Linear PCM format.
Tone Mode To choose the tone mode, highlight [ProRes 422 HQ 10-bit (MOV)] or [H.265 10-bit (MOV)] and press 2. • Videos shot using [H.265 8-bit (MOV)] and [H.264 8-bit (MP4)] use [SDR]; tone-mode selection is not available. Option [SDR] [HLG] [N-Log] Description This mode supports a normal range of brightnesses (dynamic range). This mode supports HDR (high dynamic range; 0 223). It has a wider dynamic range than SDR. • It is available only when [H.265 10-bit (MOV)] is selected for [Video file type].
Video Frame Size and Rate Options Video frame size (in pixels) and frame rate can be selected using [Frame size/frame rate] in the video recording menu. The options available for frame size vary with the settings chosen for [Video file type] in the video recording menu.
1 The frame rates for 120p, 100p, 60p, 50p, 30p, 25p, and 24p are respectively 119.88 fps, 100 fps, 59.94 fps, 50 fps, 29.97 fps, 25 fps, and 23.976 fps. 2 Fixes [Electronic VR] in the video recording menu at [OFF]. 3 Videos are recorded in 8K UHD. Not available with DX lenses. 4 Videos are recorded in 4K UHD. Average Bit Rate The average bit rate for each [Frame size/frame rate] option is shown below. • ProRes 422 HQ data specifications are available from the Apple website.
Video Image Area Options The image area for videos can be selected using [Image area] > [Choose image area] in the video recording menu. The crop used for filming video varies with the option selected. Regardless of the option selected, the aspect ratio is 16:9. • Select [FX] to shoot videos in what is referred to as “FX-based video format”, [DX] to shoot in “DX-based video format”.
• The option currently selected is shown by an icon in the display. If [ON] is chosen for [Image area] > [DX crop alert] in the video recording menu, an image-area icon will flash in the shooting display when the DX or 2.3× crop is selected. • The sizes of the different crops are shown below. Format FX-based video format Size Approx. 35.9 × 20.2 mm DX-based video format 2.3× Approx. 23.5 × 13.2 mm Approx. 16.7 × 9.4 mm • DX-based video format is selected automatically when a DX lens is attached.
Points to Note When Filming Videos Note the following points when recording videos: • Each video can be up to 125 minutes in length. • Each video recorded to a card with a capacity of 32 GB or less will be saved across a maximum of 8 files. Each of these files will be a maximum of 4 GB in size. The number of files and the length of each file vary with the options selected for [Frame size/frame rate].
A Video Recording: Shooting Mode The exposure settings that can be adjusted during filming vary with the shooting mode: Mode Aperture Shutter speed ISO sensitivity 2 P, S 1 A — — — —3 —3 4 4 M 4 4 4 1 Exposure control in mode S is the same as in mode P. 2 The maximum ISO sensitivity for videos recorded with [ON] selected for [Electronic VR] in the video recording menu is ISO 25600.
A Using a Fixed Shutter Speed In mode M, shutter speed can be set to values between 1/25 s and 1/32000 s (the slowest available shutter speed varies with the frame rate). A Wireless Remote Controllers and Remote Cords If [Record videos] is selected for Custom Setting g2 [Custom controls] > [Shutter-release button], the shutter-release buttons on optional wireless remote controllers and remote cords can be pressed halfway to focus or pressed all the way down to start and end video recording.
Recording HLG Video Video recorded in Hybrid Log Gamma (HLG) format can be used for HDR broadcasting and the like. To record HLG video, select [H.265 10-bit (MOV)] for [Video file type] in the video recording menu and choose the [HLG] tone mode. • o will appear in the shooting display. • For optimal color reproduction when viewing HLG footage, use computers, operating systems, applications, monitors, and other equipment compatible with HDR.
View Assist You may find that the preview in the shooting display during HLG recording lacks contrast. Selecting [ON] for Custom Setting g8 [View assist] simplifies colors for enhanced contrast. • p will appear in the shooting display. • Colors in the actual recorded footage are unaffected. • Contrast is also enhanced when HLG footage is viewed on the camera.
Recording N-Log Video Log recording uses light levels digitized via a log function. To enable log recording using Nikon’s unique “N-Log” log function, select [ProRes 422 HQ 10-bit (MOV)] or [H.265 10-bit (MOV)] for [Video file type] in the video recording menu and choose [N-Log] as the tone mode. Choose N-Log to preserve details in highlights and shadows and avoid over-saturated colors when recording videos. • n will appear in the shooting display.
D Cautions: N-Log Video • • • • • • • The lowest value available for the [ISO sensitivity settings] > [Maximum sensitivity] item in the video recording menu is ISO 1600. The lowest value available for the [ISO sensitivity settings] > [ISO sensitivity (mode M)] item in the video recording menu is ISO 800. ISO sensitivities of Hi 0.3 through Hi 2.0 are not available. [Set Picture Control] and [High ISO NR] are not available in the video recording menu.
Viewing and Retouching Pictures Viewing Pictures Full-Frame Playback Press the K button to view the most recent picture full frame in the display. • Press 4 to return to the previous frame, 2 to skip to the next frame. • Press 1, 3, or the DISP button to view more information on the current picture (0 230).
Thumbnail Playback To view multiple pictures, press the W (Q) button when a picture is displayed full frame. • The number of pictures displayed increases from 4 to 9 to 72 each time the W (Q) button is pressed, and decreases with each press of the X button. • Highlight pictures using 1, 3, 4, or 2.
D Touch Controls Touch controls can be used when pictures are displayed in the monitor (0 54). D Rotate Tall To display “tall” (portrait-orientation) photographs in tall orientation, select [ON] for [Rotate tall] in the playback menu. D Picture Review When [On] is selected for [Picture review] in the playback menu, photographs are automatically displayed after shooting; there is no need for you to press the K button. • If [On (monitor only)] is selected, photos will not be displayed in the viewfinder.
Photo Information Photo information is superimposed on pictures displayed in full-frame playback. Press 1, 3, or the DISP button to cycle through photo information as shown below. 1 2 3 4 File information Exposure data * Highlight display * RGB histogram * 5 6 7 Shooting data * Overview data * None (picture only) * * Displayed only if the corresponding option is selected for [Playback display options] in the playback menu.
File Information Voice memo indicator (0 295) Protect status (0 249) Retouch indicator (0 264) Upload marking (0 253) 16 IPTC preset indicator (0 726) 15 Focus point * (0 123) Frame number/total number of 14 frames 8 13 8 Image quality (0 105) 12 11 10 9 9 Image size (0 108) 10 Image area (0 102) 11 Time of recording (0 709) 12 Date of recording (0 709) 13 Current card slot 14 Rating (0 251) 15 Folder name (0 497) 16 File name (0 502) * Displayed only if [Focus point] is selected for [Playback display optio
Exposure Data 1 2 1 2 3 4 5 6 3 4 5 6 7 7 Current card slot Folder number–frame number (0 497) Shooting mode (0 132) Shutter speed (0 133, 135) Aperture (0 134, 135) Exposure compensation value (0 143) ISO sensitivity * (0 154) * Displayed in red if the picture was taken with auto ISO sensitivity control enabled. Highlight Display 1 232 Photo Information 1 Highlights (areas that may be overexposed) flash in the display.
RGB Histogram 1 2 3 4 5 1 2 3 4 5 White balance (0 158) Color temperature (0 167) Preset manual (0 170) White balance fine-tuning (0 163) Histogram (RGB channel) Histogram (red channel) Histogram (green channel) Histogram (blue channel) D Playback Zoom To zoom in on the picture in the histogram display, press X. The histogram will be updated to show only the data for the portion of the picture visible in the display. Use the multi selector to scroll to areas of the frame not visible in the monitor.
D Histograms Histograms show tone distribution. Pixel brightness (tone) is plotted on the horizontal axis and the number of pixels on the vertical axis. • If the picture contains objects with a wide range of brightnesses, the distribution of tones will be relatively even. • If the picture is dark, the distribution will be shifted to the left. • If the picture is bright, the distribution will be shifted to the right.
Shooting Data View the settings in effect at the time the picture was taken. The shooting data list has multiple pages, which can be viewed by pressing 1 or 3. The information displayed can be selected using [Playback display options] > [Detailed shooting data] in the playback menu.
❚❚ Flash Data Flash data are displayed only for pictures taken with optional flash units (0 422, 437). 1 2 3 4 1 2 3 4 Flash type Remote flash control Flash mode (0 429) Flash control mode (0 426) Flash compensation (0 432) ❚❚ Picture Control/HLG Data The items displayed vary with the Picture Control in effect when the picture was taken. The display for HLG videos shows the options selected for [HLG quality] in the video recording menu.
❚❚ Other Shooting Data 1 2 3 4 5 6 1 2 3 4 5 6 High ISO NR (0 515) Long-exposure noise reduction (0 514) Active D-Lighting (0 512) HDR strength (0 537) Vignette control (0 516) History of retouches made using [Retouch] option in playback i menu (0 264). Changes are listed in the order applied. Image comment (0 724) ❚❚ Copyright Information Copyright information is only displayed if recorded using the [Copyright information] item in the setup menu at the time the picture was taken.
❚❚ Location Data Location data are displayed only if embedded in the picture at the time it was taken. 1 2 3 4 1 2 3 4 Latitude Longitude Altitude Universal Coordinated Time (UTC) 1 2 3 4 5 6 7 8 9 Caption Event ID Headline Object name City State Country Category Supp. Cat.
Overview 1 2 3 12 11 10 4 9 1 2 3 4 5 6 6 5 8 7 Frame number/total number of frames Camera name Histogram (0 234) Image quality (0 105) Image size (0 108) Image area (0 102) 7 8 9 10 11 12 File name (0 502) Time of recording (0 709) Date of recording (0 709) Current card slot Folder name (0 497) Rating (0 251) Photo Information 239
1 2 3 4 5 6 7 8 9 10 11 12 13 20 19 14 18 Voice memo indicator (0 295) Protect status (0 249) Retouch indicator (0 264) Upload marking (0 253) IPTC preset indicator (0 726) Location data indicator (0 204) Image comment indicator (0 724) 8 Metering (0 520) 9 Shooting mode (0 132) 10 Shutter speed (0 133, 135) 11 Aperture (0 134, 135) 12 ISO sensitivity 1 (0 154) 1 2 3 4 5 6 7 17 16 15 Focal length Active D-Lighting (0 512) Picture Control (0 192) Color space (0 511) Flash mode 2 (0 429) White balance
The i Button (Playback Mode) Pressing the i button during playback zoom or full-frame or thumbnail playback displays the i menu for playback mode. Highlight items and press J or 2 to select. Press the i button again to return to playback. Photos Option [Quick crop] 1 [Rating] [Select for upload to smart device] [Select for upload to computer] [Select for upload (FTP)] Description Save a copy of the current picture cropped to the area visible in the display.
Option Description Mark for upload all pictures meeting the current filter criteria (0 255). • These options are displayed only if the camera is connected to a computer or FTP server. [Select all for • Videos over 4 GB in size cannot be selected for upload (FTP)] upload. View only pictures that match selected criteria [Filtered playback] (0 255). [Filtered playback Choose filter criteria.
Option Description [Protect] Add protection to or remove protection from the current picture (0 249). [Unprotect all] 2 Remove protection from all pictures in the folder currently selected for [Playback folder] in the playback menu. [IPTC] Embed a selected IPTC preset in the current photo (0 726). [Side-by-side comparison] 3 Compare retouched copies to the originals.
A [Side-by-Side Comparison] Choose [Side-by-side comparison] to compare retouched copies with the unretouched originals. 1 Options used to create copy 1 2 Source picture 3 Retouched copy 2 • • • • • • • • • • 244 3 The source picture is displayed on the left, the retouched copy on the right. The options used to create the copy listed at the top of the display. Press 4 or 2 to switch between the source picture and the retouched copy.
Videos Option [Rating] [Select for upload to computer] [Select for upload (FTP)] [Select all for computer upload] [Select all for upload (FTP)] Description Rate the current picture (0 251). Select the current picture for upload (0 253). These options are displayed only if the camera is connected to a computer or FTP server. Mark for upload all pictures meeting the current filter criteria (0 255). • These options are displayed only if the camera is connected to a computer or FTP server.
Option Description [Protect] Add protection to or remove protection from the current picture (0 249). [Unprotect all] Remove protection from all pictures in the folder currently selected for [Playback folder] in the playback menu. [Slide show] View a slide show; the current picture and all following pictures are displayed one at a time in the order recorded (0 257). Videos (Playback Paused) Option 9 4 [Volume control] 246 Description [Trim video] Trim unwanted footage (0 290).
Playback Zoom To zoom in on a photo displayed in full-frame playback, press X or J or give the display two quick taps. [FX (36×24)]-format photos can be zoomed in to a maximum of approximately 32× (Large pictures), 24× (Medium), or 16× (Small). Faces detected during zoom are indicated by white borders; rotate the subcommand dial to view other faces. Using Playback Zoom To Description • Zoom in/ zoom out Press the X button or use stretch gestures to zoom in.
To Description Use the multi selector or glide gestures to view areas of View other the picture not visible in the monitor. Keep the multi areas of picture selector pressed to scroll rapidly to other areas of frame. Crop picture To crop the picture to the area currently visible in the monitor, press i and select [Quick crop]. Select faces Faces detected during zoom are indicated by white borders in the navigation window. Rotate the subcommand dial or tap the onscreen guide to view other faces.
Protecting Pictures from Deletion Pictures can be protected to prevent their being deleted accidentally. Protected pictures will however be deleted when the memory card is formatted (0 708). 1 Select a picture. • Display the picture in full-frame playback or playback zoom. • Alternatively, you can highlight the picture in the thumbnail list using the multi selector. 2 Press the g (Fn4) button. • Protected pictures are marked with a P icon.
D Voice Memos Protecting photos also protects any voice memos recorded with the pictures. Voice memos cannot be protected separately. D Caution: Uploading Protected Pictures via FTP The copies on the FTP server will not be protected even if the originals are. Markings can be added using ratings.
Rating Pictures Rate pictures. 1 Select the desired picture with the multi selector and press the i button. 2 Highlight [Rating] and press 2. 3 Choose a rating. Rotate the main command dial to highlight the desired rating and press J to select. Choose from ratings of from zero to five stars, or select d to mark the picture as a candidate for later deletion.
A Ratings Ratings can also be viewed in NX Studio. A Rating Pictures Using Camera Controls If [Rating] has been assigned to a control using Custom Setting f3 [Custom controls (playback)], pictures can be rated by holding the control and rotating the main command dial.
Selecting Pictures for Upload Follow the steps below to select the current picture for upload to a smart device, computer, or ftp server. • The i menu items used to select pictures for upload vary with the type of device connected: - [Select for upload to smart device]: Displayed when the camera is connected to a smart device using [Connect to smart device] in the network menu (0 757).
1 Select the desired picture and press the i button. 2 Highlight [Select for upload to smart device], [Select for upload to computer], or [Select for upload (FTP)] and press J. Pictures destined for a smart device are marked with a W icon, while those destined for a computer or ftp server are marked with s. D Removing Upload Marking To remove upload marking, repeat Steps 1 and 2.
Filtered Playback Select [Filtered playback] in the i menu to view only pictures that meet the criteria chosen for [Filtered playback criteria] in the playback menu or playback i menu. [Filtered Playback Criteria] Highlight options and press J to select (M) or deselect (U). During filtered playback, only pictures that meet all criteria marked with a check (M) will be displayed. Option Description [Protect] M: Include protected pictures. [Picture type] M: Include pictures of the selected types.
• During filtered playback, a white border appears around the display. • To end filtered playback, select [Filtered playback] again.
Viewing Slide Shows To view a slide show in which pictures are played back one at a time in the order recorded, select [Slide show] in the i menu. You can also choose how long any photos in the show are displayed. 1 Select the starting picture using the multi selector and press the i button. The slide show starts with the selected picture and continues through all the pictures recorded after it. 2 Highlight [Slide show] and press 2.
During the Show The following operations can be performed while the show is in progress: To Adjust volume Exit to playback mode Press K to end the slide show and return to the playback display. View additional photo info 258 Description Press 4 to return to the previous frame, 2 to skip to the next frame. Press 1, 3, or DISP to choose the photo info displayed. To hide photo info, select [None (picture only)]. Press X to increase volume, W (Q) to decrease.
Deleting Pictures Follow the steps below to delete pictures from memory cards. Note that pictures cannot be recovered once deleted. Pictures that are protected, however, cannot be deleted. Using the Delete Button Press the O (Q) button to delete the current picture. 1 Select the desired picture with the multi selector and press the O (Q) button. • A confirmation dialog will be displayed. • To exit without deleting the picture, press K. 2 Press the O (Q) button again. The picture will be deleted.
Deleting Multiple Pictures Use [Delete] in the playback menu to delete multiple pictures at once. Note that depending on the number of pictures, some time may be required for deletion. Option Q [Selected pictures] [Candidates for d deletion] [Pictures shot on i selected dates] R [All pictures] 260 Deleting Pictures Description Delete selected pictures. Delete pictures rated d (candidate for deletion). Delete all pictures taken on selected dates (0 262).
❚❚ Deleting Selected Pictures 1 Select pictures. • Highlight pictures and press the W (Q) button to select; selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. • Repeat until all the desired pictures are selected. • To view the highlighted picture full screen, press and hold the X button. 2 Delete the pictures. • Press J; a confirmation dialog will be displayed.
❚❚ Candidates for Deletion 1 Select pictures. • The camera will list all pictures rated d (candidate for deletion). Pictures you do not currently wish to delete can be deselected by highlighting them using the multi selector and pressing W (Q). • To view the highlighted picture full screen, press and hold the X button. 2 Delete the pictures. • Press J; a confirmation dialog will be displayed. • Highlight [Yes] and press J to delete the selected pictures.
❚❚ Deleting All Pictures 1 Choose a memory card. Press 1 or 3 to highlight the slot containing the memory card from which the pictures will be deleted and press J. 2 Delete the pictures. • A confirmation dialog will be displayed showing the name of the folder containing the photos to be deleted. Highlight [Yes] and press J to delete all pictures from the folder. The folder is that previously selected via [Playback folder] in the playback menu.
Creating Retouched Copies Retouched copies can be created from existing pictures. Retouched copies are saved to new files, separate from the original pictures. Option [RAW processing (current picture)] [RAW processing (multiple pictures)] [Resize (current picture)] [Resize (multiple pictures)] Create a cropped copy of the current photograph (0 273). Create a small copy of the current photograph (0 274). Create small copies from one or more existing photos (0 276).
Option Description [Overlay (add)] Overlay two pictures to create a new picture in JPEG format (0 285). [Lighten] Compare the pixels at each point in multiple pictures and select the brightest to create a new picture in JPEG format (0 287). [Darken] Compare the pixels at each point in multiple pictures and select the darkest to create a new picture in JPEG format (0 287). 1 Select the desired picture with the multi selector and press the i button.
D Cautions: Retouch • The camera may not be able to display or retouch images that were taken or retouched using other cameras or that have been retouched on a computer. • If no actions are performed for a brief period, the display will turn off and any unsaved changes will be lost. To increase the time the display remains on, choose a longer menu display time using Custom Setting c3 [Power off delay] > [Menus].
RAW Processing RAW processing is used to save NEF (RAW) pictures in other formats, such as JPEG. Use [RAW processing (current picture)] to process the current picture, or [RAW processing (multiple pictures)] to process multiple pictures. D Caution: RAW Processing RAW processing is available only with NEF (RAW) images created with this camera. Pictures in other formats and NEF (RAW) photos taken with other cameras or Camera Control Pro 2 cannot be selected.
3 Choose settings for the JPEG copy. • The settings in effect when the photograph was taken appear below a preview. • To use the setting in effect when the photograph was taken, if applicable, select [Original].
❚❚ Processing Multiple Pictures 1 Select [Retouch] in the i menu, then highlight [RAW processing (multiple pictures)] and press 2. 2 Choose how pictures are selected. Option [Select picture(s)] [Select date] [Select folder] Description Create JPEG copies of selected NEF (RAW) pictures. Multiple NEF (RAW) pictures can be selected. Create JPEG copies of all NEF (RAW) pictures taken on selected dates. Create JPEG copies of all NEF (RAW) pictures in a selected folder.
4 Select photographs. If you chose [Select picture(s)]: • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. All pictures will be processed using the same settings. • Press J to proceed once selection is complete.
5 Choose settings for the JPEG copies. • To use the settings in effect when the photographs were taken, if applicable, select [Original]. 1 2 3 4 5 1 2 3 4 5 Image quality (0 105) Image size (0 108) White balance (0 158) Exposure compensation (0 143) Set Picture Control (0 192) 6 7 8 9 10 6 7 8 9 10 High ISO NR (0 515) Color space (0 511) Vignette control (0 516) Active D-Lighting (0 512) Diffraction compensation (0 517) • The effects can be previewed in the edit display.
6 Copy the photographs. • Highlight [EXE] and press J to display a confirmation dialog and then highlight [Yes] and press J to create JPEG copies of the selected photos. • To cancel the operation before all copies have been created, press the G button; when a confirmation dialog is displayed, highlight [Yes] and press J.
Trim Create a cropped copy of the current photograph. The photograph is displayed with the selected crop shown in yellow; create a cropped copy as described below. To Description Size the crop Change the crop aspect ratio Position the crop Press X or W (Q) to choose the crop size. Rotate the main command dial to choose the crop aspect ratio. Use the multi selector to position the crop. Save the crop Press J to save the current crop as a separate file.
Resize Create small copies of selected photographs. Use [Resize (current picture)] to resize the current picture, or [Resize (multiple pictures)] to resize multiple pictures. D Caution: Resize Depending on the copy size, playback zoom may not be available when resized copies are displayed. D Resizing Cropped Pictures Pictures cropped to aspect ratios of 4 : 3 or 3 : 4 cannot be resized.
3 Highlight the desired size and press J. A copy will be saved at the selected size.
❚❚ Resizing Multiple Pictures 1 Select [Retouch] in the i menu, then highlight [Resize (multiple pictures)] and press 2. 2 Choose a size. • Highlight [Choose size] and press 2. • Highlight the desired size (length in pixels) using 1 and 3 and press J.
3 Choose how pictures are selected. Option [Select date] Description Resize selected pictures. Multiple pictures can be selected. Resize all pictures taken on selected dates. [Select folder] Resize all pictures in a selected folder. [Select picture(s)] If you chose [Select picture(s)], proceed to Step 5. 4 Select the source slot. • Highlight the slot with the card containing the desired pictures and press 2. • You will not be prompted to select the slot if only one memory card is inserted.
5 Choose pictures. If you chose [Select picture(s)]: • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. The selected pictures will all be copied at the size selected in Step 2. • Press J to proceed once selection is complete.
6 Save the resized copies. • A confirmation dialog will be displayed; highlight [Yes] and press J to save the resized copies. • To cancel the operation before all copies have been created, press the G button; when a confirmation dialog is displayed, highlight [Yes] and press J.
D-Lighting D-Lighting brightens shadows. It is ideal for dark or backlit photographs. Before After The effect is shown in the display. To view the unedited picture, press and hold the DISP button. • Press 1 or 3 to choose the amount of correction performed. The effect can be previewed in the edit display. • Press J to save the retouched copy.
Straighten Rotate pictures by up to ±5° in increments of approximately 0.25°. • The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. • The greater the rotation, the more will be trimmed from the edges. • Press 1 or 3 to choose the amount of straightening performed. • Press J to save the retouched copy.
Distortion Control Create copies with reduced peripheral distortion, reducing barrel distortion in pictures taken with wide-angle lenses or pincushion distortion in pictures taken with telephoto lenses. • If the camera detects distortion, it will offer a choice of [Auto] and [Manual]. Select [Auto] to let the camera correct distortion automatically. • If the camera is unable to detect distortion, the only option available will be [Manual]. Select [Manual] to reduce distortion manually.
Perspective Control Create copies that reduce the horizontal and vertical effects of perspective in photos taken looking up from the base of a tall object. • The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. • Note that greater amounts of perspective control result in more of the edges being cropped out. • For horizontal correction, highlight J and press 2. Press 1 to stretch the left edge, 3 to stretch the right.
Monochrome Copy photographs in a selected monochrome tint. Option [Black-and-white] Description Copy photographs in black-and-white. [Sepia] Copy photographs in sepia. [Cyanotype] Copy photographs in blue-and-white monochrome. • The effect can be previewed in the edit display. To view the unedited picture, press and hold the DISP button. • Highlighting [Sepia] or [Cyanotype] and pressing 2 displays saturation options for the selected monochrome tint; choose from [High], [Normal], and [Low].
Overlay (Add) Combine two existing photographs to create a single picture that is saved separately from the originals. 1 Select [Retouch] in the i menu, then highlight [Overlay (add)] and press 2. 2 Select the pictures. • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
3 Adjust balance. The overlay can be previewed in the display. Press 1 or 3 to adjust the balance between the two pictures. Press 1 to make the first picture more visible and the second less, 3 for the opposite effect. 4 Save the overlay. Press J to save the overlay. D Cautions: [Overlay (Add)] • • Colors and brightness in the preview may differ from the final picture. Only pictures created with this camera can be selected. Pictures created with other models cannot be selected.
“Lighten” and “Darken” The camera compares multiple selected pictures and selects only the brightest or darkest pixels at each point in the picture to create a single new JPEG copy. 1 Select [Retouch] in the i menu, then highlight [Lighten] or [Darken] and press 2. • [Lighten]: The camera compares the pixels in each picture and uses only the brightest. • [Darken]: The camera compares the pixels in each picture and uses only the darkest. 2 Choose how pictures are selected.
3 Select the source slot. • Highlight the slot with the card containing the desired pictures and press 2. • You will not be prompted to select the slot if only one memory card is inserted. 4 Select the pictures. If you chose [Select individual pictures]: • Highlight pictures using the multi selector. • To view the highlighted picture full screen, press and hold the X button. • To select the highlighted picture, press the W (Q) button. Selected pictures are marked with a check ( ).
If you chose [Select folder]: Highlight the desired folder and press J to overlay all pictures in the folder using the option selected in Step 1. 5 Save the overlay. • A confirmation dialog will be displayed; highlight [Yes] and press J to save the overlay and display the resulting picture.
Editing Videos Videos can be edited using the following options: Option 9 [Trim video] [Save current 4 frame] Description Trim unwanted footage. Save a selected frame as a JPEG still. • These options are not available with videos recorded with [ProRes 422 HQ 10-bit (MOV)] or [H.265 10-bit (MOV)] selected for [Video file type] in the video recording menu. Trimming Videos 1 Display a video full frame. 2 Pause the video on the new opening frame. • Press J to start playback. Press 3 to pause.
3 Select [Trim video]. Press the i button, highlight [Trim video], and press 2. 4 Choose the start point. To create a copy that begins from the current frame, highlight [Start point] and press J. 5 Confirm the new start point. • If the desired frame is not currently displayed, press 4 or 2 to advance or rewind a frame at a time. • Rotate the main command dial one stop to skip ahead or back 10 frames. • Rotate the sub-command dial one stop to skip ahead or back 10 s.
6 Choose the end point. Press the center of the sub-selector to switch to the end-point selection tool (x) and then select the closing frame (x) as described in Step 5. 7 Press 1 to create the copy. 8 Preview the copy. • To preview the copy, highlight [Preview] and press J (to interrupt the preview and return to the save options menu, press 1). • To abandon the current copy and return to Step 5, highlight [Cancel] and press J.
9 Choose a save option. Choose [Save as new file] to save the edited copy as a new file. To replace the original video with the edited copy, choose [Overwrite existing file]. 10 Save the copy. Press J to save the copy. D Cautions: Trimming Videos • The copy will not be saved if there is insufficient space available on the memory card. • Videos less than two seconds long cannot be edited using [Trim video]. • Copies have the same time and date of creation as the original.
Saving Selected Frames as JPEG Stills 1 Pause the video on the desired frame. • Press 3 to pause playback. • Your approximate position in the video can be ascertained from the video progress bar. • Press 4 or 2 or rotate the command dials to locate the desired frame. 2 Choose [Save current frame]. Press the i button, then highlight [Save current frame] and press J to create a JPEG copy of the current frame.
Voice Memos Recording Voice Memos Voice memos up to 60 seconds long can be added to photographs. 1 Select the photograph. Only one voice memo can be recorded per picture; additional voice memos cannot be recorded for pictures already marked with a h icon. The existing voice memo must be deleted before another can be recorded (0 299). 2 Hold the b button. • Audio is recorded while the button is pressed.
3 Release the b button. • Recording will end. • Pictures with voice memos are indicated by h icons. D Recording Not Available Voice memos cannot be added to videos or Image Dust Off reference data. D Recording Restrictions Voice memos cannot be recorded if: • the photo/video selector is rotated to 1 or • a multiple exposure is in progress. D Caution: Recording Voice Memos Touch controls are disabled and other pictures cannot be displayed while recording is in progress.
D Storage Location Voice memos for pictures taken with two memory cards inserted and [Backup], [RAW Slot 1 - JPEG Slot 2], or [JPEG Slot 1 - JPEG Slot 2] selected for [Role played by card in Slot 2] in the photo shooting menu are recorded with the copies on both cards. D Voice Memo File Names Voice memo file names have the form “DSC_nnnn.WAV”. The voice memo has the same file number (“nnnn”) as the picture with which it is associated. For example, the voice memo for the picture “DSC_0002.
Playing Voice Memos To play voice memos, press the b button when viewing photographs marked with h icons. D Interrupting Playback Pressing the shutter-release button or operating other camera controls may end playback. Playback ends automatically when another picture is selected or the camera is turned off. A The i Menu Voice memos can also be played by highlighting [Play voice memo] in the playback i menu and pressing J.
Deleting Voice Memos To delete the voice memo from the current photo, press the O (Q) button; a confirmation dialog will be displayed as shown. • To delete both the photo and the voice memo, highlight [Picture and voice memo] and press O (Q). • To delete only the voice memo, highlight [Voice memo only] and press O (Q). • To exit without deleting either the photo or the voice memo, press D.
Connecting to HDMI TVs and Recorders Connecting to HDMI Devices The camera can be connected to TVs, recorders, and other devices featuring HDMI connectors. Use a third-party type A HDMI cable. The cable must be purchased separately. Always turn the camera off before connecting or disconnecting a cable. 1 2 1 HDMI connector for connection to camera 2 HDMI connector for connection to external device * * Choose a cable with a connector that matches the connector on the HDMI device.
TVs • After tuning the TV to the HDMI input channel, turn the camera on and press the K button to view pictures on the television screen. • Audio playback volume can be adjusted using the controls on the TV. Camera controls cannot be used. • If the camera is paired with a smart device running the SnapBridge app, the device can be used to control playback remotely while the camera is connected to a TV. See SnapBridge online help for details. • Use an HDMI input connector compliant with HDMI 2.
Recorders In video mode, the camera can record directly to connected HDMI recorders. • If a memory card is inserted in the camera when it is connected to a recorder, video will be recorded both to the recorder and the memory card. If no memory card is inserted, the footage will be recorded only to the external device. Adjusting Settings Use the [HDMI] item in the setup menu to adjust settings for HDMI output.
Option Description Choose whether shooting information is displayed on the [Output HDMI device. If [ON] is selected, icons and other shooting info] information in the shooting display will be recorded with the footage saved to external recorders. [Mirror camera info display] Choose whether the display in the camera monitor remains on while an HDMI device is connected. • If [OFF] is selected, the display will remain off, reducing the drain on the camera battery.
❚❚ “Output Resolution” • When [Auto] is selected for [HDMI] > [Output resolution] in the setup menu, the camera automatically detects whether the external recorder supports the frame size and rate selected on the camera. If it does not, the camera will search for a supported resolution and frame rate in the order listed below. If no supported resolution and frame rate is found, output will be suspended.
Frame size/frame rate Output resolution/frame rate search order [1920×1080; 120p] [1920×1080; 100p] 1080/120p V 1080/60p V 1080/30p 1080/100p V 1080/50p V 1080/25p [1920×1080; 60p] 1080/60p V 1080/30p [1920×1080; 50p] [1920×1080; 30p] 1080/50p V 1080/25p 1080/30p [1920×1080; 25p] [1920×1080; 24p] 1080/25p 1080/24p - Memory card inserted in camera: Frame size/frame rate Output resolution/frame rate search order [7680×4320; 30p] [7680×4320; 25p] 1080/30p 1080/25p [7680×4320; 24p] [3840×2160; 120
D Frame Rates for [Output Resolution] Options Other Than [Auto] Video recording rates of 120p, 100p, 60p, or 50p will be adjusted as follows if not compatible with the frame rate chosen for the external recorder. • 120p: The frame rate will first drop to 60p. If 60p is also not supported, it will drop to 30p. • 100p: The frame rate will first drop to 50p. If 50p is also not supported, it will drop to 25p. • 60p: The frame rate will drop to 30p. • 50p: The frame rate will drop to 25p.
D Zoom • The camera display can be zoomed in by pressing the X button during recording, but this has no effect on the footage output to the recorder. • If no footage is currently being recorded, changes to zoom using the X button will be reflected both in the camera display and in the output to the recorder. The output resolution however switches to [1080p (progressive)], even if the option last selected for [HDMI] > [Output resolution] in the setup menu was [4320p (progressive)] or [2160p (progressive)].
YCbCr and Bit Depth The YCbCr value and bit depth for footage output to external HDMI devices when [H.265 10-bit (MOV)] or [H.265 8-bit (MOV)] is selected for [Video file type] in the video recording menu varies with the frame size and rate. Frame size/frame rate Video file type H.265 10-bit H.
• [ProRes 422 HQ 10-bit (MOV)] footage is output at a YCbCr value of 4:2:2 and a bit depth of 10 bits, regardless of the option selected for [Frame size/frame rate]. • [H.264 8-bit (MP4)] footage is output at a YCbCr value of 4:2:2 and a bit depth of 8 bits, regardless of the option selected for [Frame size/ frame rate]. D Recording to External Recorders That Support a Bit Depth of 10 Bits The HDMI signal will be output at a bit depth of 10 bits only to HDMI recorders that support this option.
External Recording Control Choosing [ON] for [External rec. cntrl (HDMI)] in the video recording menu allows camera controls to be used to start and stop recording on the external recorder. • For information on whether your recorder supports external recording control, consult the manufacturer. • The camera display will turn off automatically when the time selected for Custom Setting c3 [Power off delay] > [Standby timer] expires, ending HDMI output.
Connecting to Smart Devices The SnapBridge App Use the SnapBridge app for wireless connections between the camera and your smartphone or tablet (“smart device”). • SnapBridge apps can be downloaded from the Apple App Store® or on Google Play™. • Visit the Nikon website for the latest SnapBridge news. • Carefully read any license agreements or the like displayed when SnapBridge is launched and only proceed if you are willing to accept them.
What SnapBridge Can Do for You The tasks that can be performed using the SnapBridge app are outlined below. For details, see the SnapBridge app online help: https://nikonimglib.com/snbr/onlinehelp/en/index.html ❚❚ Downloading Pictures from the Camera Download existing pictures to your smart device. They can also be downloaded automatically as they are taken. ❚❚ Remote Photography Control the camera and take pictures from the smart device.
Wireless Connections Use the SnapBridge app for wireless connections between the camera and your smart device. You can connect via either Bluetooth (0 313) or Wi-Fi (0 317). Connecting using Bluetooth allows pictures to be uploaded automatically as they are taken. Connecting via Bluetooth (Pairing) Before connecting via Bluetooth for the first time, you will need to pair the camera and smart device. D Before Pairing • Enable Bluetooth on the smart device.
❚❚ Pairing Pair the camera and smart device as described below. • Some operations are performed using the camera, others on the smart device. • Additional instructions are available via SnapBridge online help. 1 Camera: Select [Connect to smart device] > [Pairing (Bluetooth)] in the network menu, then highlight [Start pairing] and press J. The camera name will be displayed in the monitor.
2 Smart device: Launch the SnapBridge app and tap [Connect to camera] in the tab. If this is the first time you have launched the app, you should instead tap [Connect to camera] in the welcome display. 3 Smart device: Follow the on-screen instructions. • When prompted, tap the category for your camera and then tap the “pairing” option when prompted to choose the connection type. • Tap the camera name when prompted.
D Pairing Error If you wait too long between pressing the button on the camera and tapping the button on the smart device in Step 4, the device will display an error message and pairing will fail. • If you are using an Android device, tap [OK] and return to Step 1. • If you are using an iOS device, dismiss the SnapBridge app and check that it is not running in the background, then request iOS to “forget” the camera before returning to Step 1.
Connecting via Wi-Fi (Wi-Fi Mode) In Wi-Fi mode, the camera connects directly to the smart device via WiFi, no Bluetooth pairing required. D Before Connecting (Wi-Fi Mode) • Enable Wi-Fi on the smart device. For details, see the documentation provided with the device. • Ensure that the batteries in the camera and smart device are fully charged to prevent the devices turning off unexpectedly. • Check that there is space available on the camera memory card.
❚❚ Connecting Follow the steps below to establish a connection between the camera and smart device in Wi-Fi mode. • Some operations are performed using the camera, others on the smart device. • Additional instructions are available via SnapBridge online help. 1 Smart device: Launch the SnapBridge app, open the tab, tap , and select [Wi-Fi mode]. If this is the first time you have launched the app, you should instead tap [Connect to camera] in the welcome display.
3 Camera: Select [Connect to smart device] > [Wi-Fi connection] in the network menu, then highlight [Establish Wi-Fi connection] and press J. The camera SSID and password will be displayed. 4 Smart device: Follow the on-screen instructions to establish a Wi-Fi connection. • On iOS devices, the “Settings” app will launch. Tap [< Settings] to open [Settings], then scroll up and tap [Wi-Fi] (which you’ll find near the top of the settings list) to display Wi-Fi settings.
5 Smart device: After adjusting device settings as described in Step 4, return to the SnapBridge app. • After establishing a Wi-Fi connection to the camera, the smart device will display Wi-Fi mode options. • The camera will display a message stating that the connection is complete. The camera and smart device are now connected via Wi-Fi. For information on using the SnapBridge app, see online help. D Terminating Wi-Fi Mode To end the Wi-Fi connection, tap in the SnapBridge tab.
Connecting to Computers or FTP Servers Making the Connection The camera can be connected to a computer or FTP server using any of the methods below. Computers: Connecting via USB Connect the camera and computer via USB and use NX Studio to upload pictures to the computer (0 323). • The camera can be controlled remotely from the computer using optional Camera Control Pro 2 software.
Computers: Connecting via Ethernet or Wireless LAN Connect to a computer via Ethernet or using the camera’s built-in wireless LAN. You can upload pictures to the computer or control the camera remotely via a network using optional Camera Control Pro 2 software (0 327). FTP Servers: Connecting via Ethernet or Wireless LAN Upload pictures to an FTP server via Ethernet or using the camera’s built-in wireless LAN (0 366).
Computers: Connecting via USB Connect the camera using the supplied USB cable. You can then use NX Studio software to copy pictures to the computer for viewing and editing. Installing NX Studio You will need an Internet connection when installing NX Studio. Visit the Nikon website for the latest information, including system requirements. • Download the latest NX Studio installer from the website below and follow the on-screen instructions to complete installation. https://downloadcenter.nikonimglib.
Copying Pictures to a Computer Using NX Studio See online help for detailed instructions. 1 Connect the camera to the computer. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown. A Using a Card Reader Pictures can also be copied from a memory card inserted in a third-party card reader. You should however check that the card is compatible with the card reader. 2 Turn the camera on. • The Nikon Transfer 2 component of NX Studio will start.
3 Click [Start Transfer]. Pictures on the memory card will be copied to the computer. 4 Turn the camera off. Disconnect the USB cable when transfer is complete. D Windows 10 and Windows 8.1 Windows 10 and Windows 8.1 may display an AutoPlay prompt when the camera is connected. Click the dialog and then click [Nikon Transfer 2] to select Nikon Transfer 2.
D macOS If Nikon Transfer 2 does not start automatically, confirm that the camera is connected and then launch Image Capture (an application that comes with macOS) and select Nikon Transfer 2 as the application that opens when the camera is detected. D Caution: Transferring Videos Do not attempt to transfer videos from the memory card while it is inserted in a camera of a different make or model. Doing so could result in the videos being deleted without being transferred.
Computers: Connecting via Ethernet or Wireless LAN The camera can connect to computers either directly or via existing networks using Wi-Fi (built-in wireless LAN) or a third-party Ethernet cable inserted in the camera’s Ethernet connector. What Ethernet and Wireless LAN Can Do for You Ethernet and wireless LAN connections can be used for the following tasks: ❚❚ Uploading Pictures Existing pictures can be uploaded to the computer. They can also be uploaded automatically as they are taken.
The Wireless Transmitter Utility Before you will be able to connect to a wireless or Ethernet LAN, you will need to pair the camera with the computer using Nikon’s Wireless Transmitter Utility software. • Once the devices are paired, you will be able to connect to the computer from the camera. • The Wireless Transmitter Utility is available for download from the Nikon Download Center. Check the version and system requirements and be sure to download the latest version. https://downloadcenter.nikonimglib.
Wireless LAN The camera can connect to computers either by direct wireless link (access-point mode) or via a wireless router on an existing network, including home networks (infrastructure mode). ❚❚ Direct Wireless Connection (Access-Point Mode) The camera and computer connect via direct wireless link.
2 Highlight [Create profile] and press J. 3 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to computer] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name. 4 Highlight [Direct connection to computer] and press J. The camera SSID and encryption key will be displayed.
5 Establish a connection to the camera. Windows: • Click the wireless LAN icon in the taskbar. • Select the SSID displayed by the camera in Step 4. • When prompted to enter the network security key, enter the encryption key displayed by the camera in Step 4. The computer will initiate a connection to the camera. macOS: • Click the wireless LAN icon in the menu bar. • Select the SSID displayed by the camera in Step 4.
6 Start pairing. When prompted, launch the Wireless Transmitter Utility on the computer. 7 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 6 and click [Next].
8 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. • The camera will display an authentication code. • Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next].
9 Complete the pairing process. • When the camera displays a message stating that pairing is complete, press J. • In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. • A wireless connection will be established between the camera and computer when pairing is complete.
10 Check the connection. When a connection is established, the profile name will be displayed in green in the camera [Connect to computer] menu. • If the profile name is not displayed in green, connect to the camera via the wireless network list on your computer. A wireless connection has now been established between the camera and the computer. Pictures taken with the camera can be uploaded to the computer as described in“Uploading Pictures” (0 354).
❚❚ Connecting in Infrastructure Mode The camera connects to a computer on an existing network (including home networks) via a wireless router. The computer can still connect to the Internet while connected to the camera. • Before proceeding, check that the Wireless Transmitter Utility (0 328) is installed on the computer. • Confirm that [OFF] is selected for [Wired LAN] in the network menu. D Infrastructure Mode Connection to computers beyond the local area network is not supported.
2 Highlight [Create profile] and press J. 3 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to computer] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
4 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D [Easy Connect] • To connect without entering an SSID or encryption key, press X in Step 4. Next, press J and choose from the following options: Option Description For routers that support push-button WPS. Press the [Push-button WPS button on the router and then press the camera WPS] J button to connect. The camera will display a PIN.
5 Choose a network. • Highlight a network SSID and press J. • The band on which each SSID operates is indicated by an icon. • Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 7. • If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
6 Enter the encryption key. • Press J and enter the encryption key for the wireless router. • For more information, see the documentation for the wireless router. • Press X when entry is complete. • Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
7 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. • Press J; you will be prompted to enter the IP address. • Rotate the main command dial to highlight segments.
8 Start pairing. When prompted, launch the Wireless Transmitter Utility on the computer. 9 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 8 and click [Next].
10 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. • The camera will display an authentication code. • Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next].
11 Complete the pairing process. • When the camera displays a message stating that pairing is complete, press J. • In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. • A wireless connection will be established between the camera and computer when pairing is complete.
12 Check the connection. When a connection is established, the profile name will be displayed in green in the camera [Connect to computer] menu. A wireless connection has now been established between the camera and the computer. Pictures taken with the camera can be uploaded to the computer as described in“Uploading Pictures” (0 354). For information on controlling the camera from a computer using Camera Control Pro 2, see “Camera Control” (0 361).
Ethernet Connections The camera can connect to computers either directly or via existing networks using a third-party Ethernet cable inserted in the camera’s Ethernet connector. ❚❚ Connecting an Ethernet Cable Connect an Ethernet cable to the camera’s Ethernet connector. Do not use force or attempt to insert the connectors at an angle. Connect the other end of the cable to a computer or router.
❚❚ Ethernet Network Profiles Before proceeding, check that an Ethernet cable is connected to the camera and the Wireless Transmitter Utility (0 328) is installed on the computer. 1 Select [ON] for [Wired LAN] in the network menu. 2 Select [Connect to computer] in the network menu, then highlight [Network settings] and press 2. 3 Highlight [Create profile] and press J.
4 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to computer] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
5 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. • Press J; you will be prompted to enter the IP address. • Rotate the main command dial to highlight segments.
6 Start pairing. When prompted, launch the Wireless Transmitter Utility on the computer. 7 Select the camera in the Wireless Transmitter Utility. Select the name displayed by the camera in Step 6 and click [Next].
8 In the Wireless Transmitter Utility, enter the authentication code displayed by the camera. • The camera will display an authentication code. • Enter the authentication code in the dialog displayed by the Wireless Transmitter Utility and click [Next].
9 Complete the pairing process. • When the camera displays a message stating that pairing is complete, press J. • In the Wireless Transmitter Utility, click [Next]; you will be prompted to choose a destination folder. For more information, see online help for the Wireless Transmitter Utility. • A connection will be established between the camera and computer when pairing is complete.
10 Check the connection. When a connection is established, the profile name will be displayed in green in the camera [Connect to computer] menu. A connection has now been established between the camera and the computer. Pictures taken with the camera can be uploaded to the computer as described in“Uploading Pictures” (0 354). For information on controlling the camera from a computer using Camera Control Pro 2, see “Camera Control” (0 361).
Uploading Pictures Pictures can be selected for upload during playback. They can also be uploaded automatically as they are taken. • Before uploading pictures, connect the camera and computer via Ethernet or a wireless network. Connect using a host profile selected via the network menu [Connect to computer] > [Network settings] list. • When a connection is established, the profile name will be displayed in green in the camera [Connect to computer] menu.
D Destination Folders By default, pictures are uploaded to the following folders: • Windows: \Users\(user name)\Pictures\Wireless Transmitter Utility • macOS: /Users/(user name)/Pictures/Wireless Transmitter Utility The destination folder can be selected using the Wireless Transmitter Utility. For more information, see online help for the Wireless Transmitter Utility. D Caution: Access Point Mode Select a host profile and enable camera Wi-Fi before connecting.
❚❚ Selecting Pictures for Upload 1 Select [Picture transfer] for [Connect to computer] > [Connection type] in the network menu. 2 Press the K button on the camera and select full-frame or thumbnail playback. 3 Select a picture and press the i button. 4 Highlight [Select for upload to computer] and press J. • A white “priority upload” icon will appear on the picture. If the camera is currently connected to a network, upload will begin immediately and the icon will turn green.
D Removing Upload Marking • • Repeat Steps 3–4 to remove upload marking from selected pictures. To remove upload marking from all pictures, select [Connect to computer] > [Options] > [Deselect all?] in the network menu. A Filtering Pictures for Upload The [Filtered playback] item in the playback i menu can be used to display only pictures that meet chosen criteria (0 255). The pictures can then all be selected for upload by highlighting [Select all for computer upload] in the i menu and pressing J.
❚❚ Uploading Photos as They Are Taken To upload new photos as they are taken, select [ON] for [Connect to computer] > [Options] > [Auto upload] in the network menu. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Videos are not uploaded automatically. They must instead be uploaded manually from the playback display. ❚❚ The Upload Icon Upload status is indicated by the upload icon.
❚❚ The [Connect to Computer] Upload Status Display The [Connect to computer] display shows the following: 1 1 4 3 2 2 3 4 Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. While files are being transferred, the status display shows “Now uploading” preceded by the name of the file being sent. Errors are also displayed here. Signal strength: Ethernet connections are shown by d.
D Caution: During Upload Do not remove the memory card or disconnect the Ethernet cable during upload. D Voice Memos Voice memos will be included when the associated pictures are transmitted. They cannot, however, be uploaded separately. D Turning the Camera Off The camera saves transfer marking when turned off and resumes upload when next turned on. A Connection Status Connection status is shown by the camera network indicator.
Camera Control The camera can be controlled from a computer running Camera Control Pro 2. Photos can be saved directly to the computer instead of to the memory card and can consequently be taken even when no memory card is inserted in the camera. • You will still need to insert a memory card when filming videos. • Note that the camera standby timer does not expire in camera control mode. • Before using Camera Control Pro 2, connect the camera and computer via Ethernet or a wireless network.
1 Select [Camera control] for [Connect to computer] > [Connection type] in the network menu. 2 Launch the copy of Camera Control Pro 2 installed on the host computer. 3 Control the camera using Camera Control Pro 2. For information on taking pictures using Camera Control Pro 2, see the online help or other documentation for Camera Control Pro 2.
❚❚ The [Connect to Computer] Camera Control Display The [Connect to computer] display shows the following: 1 1 3 2 2 3 Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. Errors are also displayed here (0 397). Signal strength: Ethernet connections are shown by d. When the camera is connected to a wireless network, the icon instead shows the wireless signal strength.
D Caution: Ethernet Networks Do not disconnect the Ethernet cable during upload or while the camera is on. D Caution: Wireless Networks Response may slow on wireless networks. D Firewall Settings TCP port 15740 and UDP port 5353 are used for connections to computers. File transfer may be blocked if the server firewall is not configured to allow access to these ports. A Connection Status Connection status is shown by the camera network indicator.
Ending the Connection to the Computer You can end the connection by: • turning the camera off, • selecting [End current connection] for [Connect to computer] > [Network settings] in the network menu, or • connecting to a smart device via Wi-Fi or Bluetooth. D Access-Point Mode An error will occur if the computer’s wireless connection is disabled before the camera’s. Disable camera’s connection first.
FTP Servers: Connecting via Ethernet or Wireless LAN The camera can connect to FTP servers and upload pictures via existing networks using Wi-Fi (builtin wireless LAN) or a third-party Ethernet cable inserted in the camera’s Ethernet connector. The camera can also be connected to FTP servers directly. FTP D FTP Servers • Servers can be configured using standard FTP services—including IIS (Internet Information Services)—available with Windows 10 (Enterprise/ Pro/Home).
Wireless LAN The camera can connect to FTP servers either by direct wireless link (access-point mode) or via a wireless router on an existing network, including home networks (infrastructure mode). ❚❚ Direct Wireless Connection (Access-Point Mode) The camera and FTP server connect via direct wireless link.
2 Highlight [Create profile] and press J. 3 Highlight [Connection wizard] and press 2. The connection wizard will launch. D Manual Configuration Choose [Configure manually] to configure settings manually.
4 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to FTP server] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name. 5 Highlight [Direct connection to computer] and press J. The camera SSID and encryption key will be displayed.
6 Establish a connection to the camera. Windows: • Click the wireless LAN icon in the taskbar. • Select the SSID displayed by the camera in Step 5. • When prompted to enter the network security key, enter the encryption key displayed by the camera in Step 5. The computer will initiate a connection to the camera. macOS: • Click the wireless LAN icon in the menu bar. • Select the SSID displayed by the camera in Step 5.
7 Choose the server type. Highlight [FTP] or [SFTP] (secure FTP) and press J to display a dialog where you can choose a login method. 8 Log in. Highlight one of the following options and press J. Option [Anonymous login] [Enter user ID] Description Select this option if the server does not require a user ID or password. This option can only be used with servers that are configured for anonymous login. If login is successful, the camera will prompt you to choose a destination.
9 Choose a destination folder. Highlight one of the following options and press J. Option Description Select this option to select the server’s home folder as the destination for pictures uploaded from the camera. [Home folder] A “setup complete” dialog will be displayed if the operation is successful. [Enter folder name] Enter the destination folder name manually. The folder must already exist on the server.
❚❚ Connecting in Infrastructure Mode The camera connects to an FTP server on an existing network (including home networks) via a wireless router. FTP • Create a host profile using the camera connection wizard. • Before connecting to a wireless network, confirm that [OFF] is selected for [Wired LAN] in the network menu. A Infrastructure Mode Infrastructure mode supports connection to FTP servers on different networks.
3 Highlight [Connection wizard] and press 2. The connection wizard will launch. D Manual Configuration Choose [Configure manually] to configure settings manually. 4 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to FTP server] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
5 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D [Easy Connect] • To connect without entering an SSID or encryption key, press X in Step 5. Next, press J and choose from the following options: Option Description For routers that support push-button WPS. Press the [Push-button WPS button on the router and then press the camera WPS] J button to connect. The camera will display a PIN.
6 Choose a network. • Highlight a network SSID and press J. • The band on which each SSID operates is indicated by an icon. • Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 8. • If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
7 Enter the encryption key. • Press J and enter the encryption key for the wireless router. • For more information, see the documentation for the wireless router. • Press X when entry is complete. • Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
8 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. • Press J; you will be prompted to enter the IP address. • Rotate the main command dial to highlight segments.
9 Choose the server type. Highlight [FTP] or [SFTP] (secure FTP) and press J to display a dialog where you can enter the server address. 10 Enter the server address. • Press J to enter the server URL or IP address. • Press X when entry is complete. • Press X again to connect to the FTP server. You will be prompted to choose a login method.
11 Log in. Highlight one of the following options and press J. Option Description [Anonymous login] Select this option if the server does not require a user ID or password. This option can only be used with servers that are configured for anonymous login. If login is successful, the camera will prompt you to choose a destination. [Enter user ID] Enter a user ID and password. Press J to log in when entry is complete. If login is successful, the camera will prompt you to choose a destination.
12 Choose a destination folder. Highlight one of the following options and press J. Option Description Select this option to select the server’s home folder as the destination for pictures uploaded from the camera. [Home folder] A “setup complete” dialog will be displayed if the operation is successful. [Enter folder name] Enter the destination folder name manually. The folder must already exist on the server.
Ethernet The camera can connect to FTP servers either directly or via existing networks using a third-party Ethernet cable inserted in the camera’s Ethernet connector. ❚❚ Connecting an Ethernet Cable Connect an Ethernet cable to the camera’s Ethernet connector. Do not use force or attempt to insert the connectors at an angle. Connect the other end of the cable to the FTP server or a router.
1 Select [ON] for [Wired LAN] in the network menu. 2 Select [Connect to FTP server] in the network menu, then highlight [Network settings] and press 2. 3 Highlight [Create profile] and press J.
4 Highlight [Connection wizard] and press 2. The connection wizard will launch. D Manual Configuration Choose [Configure manually] to configure settings manually. 5 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to FTP server] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
6 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. Enter the IP address and sub-net mask manually. • Press J; you will be prompted to enter the IP address. • Rotate the main command dial to highlight segments.
7 Choose the server type. Highlight [FTP] or [SFTP] (secure FTP) and press J to display a dialog where you can enter the server address. 8 Enter the server address. • Press J to enter the server URL or IP address. • Press X when entry is complete. • Press X again to connect to the FTP server. You will be prompted to choose a login method.
9 Log in. Highlight one of the following options and press J. Option Description [Anonymous login] Select this option if the server does not require a user ID or password. This option can only be used with servers that are configured for anonymous login. If login is successful, the camera will prompt you to choose a destination. [Enter user ID] Enter a user ID and password. Press J to log in when entry is complete. If login is successful, the camera will prompt you to choose a destination.
10 Choose a destination folder. Highlight one of the following options and press J. Option Description Select this option to select the server’s home folder as the destination for pictures uploaded from the camera. [Home folder] A “setup complete” dialog will be displayed if the operation is successful. [Enter folder name] Enter the destination folder name manually. The folder must already exist on the server.
Uploading Pictures Pictures can be selected for upload during playback. They can also be uploaded automatically as they are taken. • Before uploading pictures, connect the camera and FTP server via Ethernet or a wireless network. Connect using a host profile selected via the [Connect to FTP server] > [Network settings] list. • When a connection is established, the profile name will be displayed in green in the camera [Connect to FTP server] menu.
❚❚ Selecting Pictures for Upload 1 Press the K button on the camera and select full-frame or thumbnail playback. 2 Select a picture and press the i button. 3 Highlight [Select for upload (FTP)] and press J. • A white “priority upload” icon will appear on the picture. If the camera is currently connected to a network, upload will begin immediately and the icon will turn green. • Otherwise, upload will begin when a connection is established. • Repeat Steps 2–3 to upload additional pictures.
D Removing Upload Marking • • Repeat Steps 2–3 to remove upload marking from selected pictures. To remove upload marking from all pictures, select [Connect to FTP server] > [Options] > [Deselect all?] in the network menu. A Filtering Pictures for Upload The [Filtered playback] item in the playback i menu can be used to display only pictures that meet chosen criteria (0 255). The pictures can then all be selected for upload by highlighting [Select all for upload (FTP)] in the i menu and pressing J.
❚❚ Uploading Photos as They Are Taken To upload new photos as they are taken, select [ON] for [Connect to FTP server] > [Options] > [Auto upload] in the network menu. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Videos are not uploaded automatically. They must instead be uploaded manually from the playback display. ❚❚ The Upload Icon Upload status is indicated by the upload icon.
❚❚ The [Connect to FTP Server] Upload Status Display The [Connect to FTP server] display shows the following: 1 1 4 3 2 2 3 4 Status: The status of the connection to the host. The profile name is displayed in green when a connection is established. While files are being transferred, the status display shows “Now uploading” preceded by the name of the file being sent. Errors and error codes are also displayed here (0 399). Signal strength: Ethernet connections are shown by d.
D Caution: During Upload Do not remove the memory card or disconnect the Ethernet cable during upload. D Caution: Uploading Protected Pictures via FTP The copies on the FTP server will not be protected even if the originals are. Markings can be added using ratings (0 251). D Voice Memos Voice memos will be included when the associated pictures are transmitted. They cannot, however, be uploaded separately.
A Connection Status Connection status is shown by the camera network indicator. Network indicator I (off) K (green) H (flashes green) H (flashes amber) Status No connection. Waiting to connect. Connected. Error.
Ending the Connection to the FTP Server You can end the connection by: • turning the camera off, • selecting [End current connection] for [Connect to FTP server] > [Network settings] in the network menu, or • connecting to a smart device via Wi-Fi or Bluetooth. D Access-Point Mode An error will occur if the FTP server’s wireless connection is disabled before the camera’s. Disable camera’s connection first.
Troubleshooting Wireless LAN and Ethernet Connections Refer to this section for information on errors involving wireless LAN and Ethernet connections. • For information on the Wireless Transmitter Utility, see the utility’s online help. Problems and Solutions Solutions to some common issues are listed below. Problem Solution The camera displays a wireless error. • The camera displays a TCP/IP error. • The camera displays an FTP error. Connection settings require adjustment.
Problem Solution The camera displays a The memory card is inserted incorrectly or not at all. “no memory card” Check that card is inserted correctly (0 81). error. Upload is interrupted Upload will resume if the camera is turned off and and fails to resume. then on again (0 359). The connection is unreliable. 398 If the camera is connected in infrastructure mode, check that the router is set to a channel between 1 and 8 (0 760, 765).
Error Codes The following messages and error codes may be displayed if an error occurs while the camera is connected to an FTP server via Ethernet or wireless LAN. ● [Wireless Error.] Error code Err. 11 Err. 12 ● Solution Confirm that the device to which you are attempting to connect is on. Check the SSID (0 765). Confirm that you are using the correct password for the selected SSID. Confirm that you are using the correct authentication method (0 765). Err.
● [PTP/IP Error.] Error code Err. 41 ● [FTP Error.] Error code Err. 31 Err. 32 Err. 34 Err. 35 Err. 36 Err. 37 Err. 3F 400 Solution Turn the camera off and then on again. Solution Check that the FTP server address is correct (0 765). Check that the login name and password are correct (0 765). Check that the destination folder name is correct (0 765). Confirm that the destination folder is not writeprotected. Check the DNS (0 765). Check firewall settings (0 371). Check PASV mode settings (0 765).
Connecting to Other Cameras What Inter-camera Connections Can Do for You Camera-Based Remote Photography (Synchronized Release) A master camera can be used to release the shutters on up to ten remote cameras in the same group (0 402). Clock Synchronization (Synchronize Date and Time) Synchronize the clocks on multiple cameras via a network (0 421).
Synchronized Release Configuring and Using Synchronized Release Follow the steps below to create host profiles for synchronized release. Each camera saves the pictures it takes to its own memory card. Repeat the process to create identical profiles for each camera. ❚❚ Wireless LAN To create host profiles when connecting via wireless LAN: 1 Select [Connect to other cameras] in the network menu, then highlight [Network settings] and press 2. 2 Highlight [Create profile] and press J.
3 Name the new profile. • To proceed to the next step without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to other cameras] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
4 Highlight [Search for Wi-Fi network] and press J. The camera will search for networks currently active in the vicinity and list them by name (SSID). D [Easy Connect] • To connect without entering an SSID or encryption key, press X in Step 4. Next, press J and choose from the following options: Option Description For routers that support push-button WPS. Press the [Push-button WPS button on the router and then press the camera WPS] J button to connect. The camera will display a PIN.
5 Choose a network. • Highlight a network SSID and press J. • The band on which each SSID operates is indicated by an icon. • Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 7. • If the desired network is not displayed, press X to search again. D Hidden SSIDs Networks with hidden SSIDs are indicated by blank entries in the network list.
6 Enter the encryption key. • Press J and enter the encryption key for the wireless router. • For more information on the wireless router encryption key, see the documentation for the wireless router. • Press X when entry is complete. • Press X again to initiate the connection. A message will be displayed for a few seconds when the connection is established.
7 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. • It is recommended that you note the remote camera IP address, as you will need it in subsequent steps. Enter the IP address and sub-net mask manually.
8 Highlight [Group name], press 2, and enter a group name. Enter a group name for the synchronized cameras. Group names can be up to eight characters long. • All master and remote cameras on the network must be in the same group. 9 Highlight [Master/remote] and press 2. Choose a role for each camera from “master” and “remote”. • [Master camera]: Pressing the shutterrelease button on the master camera releases the shutters on the remote cameras. Each group can have only one master.
11 On the master camera, highlight [Remote camera list] and press 2. Cameras assigned the remote camera role in Step 9 are added to the master camera’s remote camera list. The master camera can store information for up to 10 remote cameras in slots [01] through [10]. 12 Highlight the desired slot and press 2. Remote camera options will be displayed. 13 Highlight [Address] and press 2. You will be prompted to enter an IP address.
14 Enter the remote camera IP address. Enter the remote camera IP address you noted in Step 7. • Rotate the main command dial to highlight segments. • Press 4 or 2 to change the highlighted segment and press J to proceed. • Press X to add the remote camera to the master camera remote camera list and establish a connection.
15 Add the remaining remote cameras. • When connecting to wireless networks, the cameras will display the band used by the selected SSID. • The master camera shows the number of cameras in the group currently connected or not connected. 16 Take pictures. • Pressing the shutter-release button on the master camera releases the shutters on the remote cameras. • Note that the standby timers will not expire automatically when the cameras are in synchronized release mode.
❚❚ Ethernet Follow the steps below to create host profiles for Ethernet connections. Before proceeding, connect an Ethernet cable to the camera’s Ethernet connector. Do not use force or attempt to insert the connectors at an angle. Connect the other end of the cable to a router. 1 Select [ON] for [Wired LAN] in the network menu. 2 Select [Connect to other cameras] in the network menu, then highlight [Network settings] and press 2. 3 Highlight [Create profile] and press J.
4 Name the new profile. • To display IP address options without changing the default name, press X. • Whatever name you choose will appear in the network menu [Connect to other cameras] > [Network settings] list. • To rename the profile, press J. For information on text entry, see “Text Entry” (0 64). Press X to proceed after entering a name.
5 Obtain or select an IP address. • Highlight one of the following options and press J. Option [Obtain automatically] [Enter manually] Description Select this option if the network is configured to supply the IP address automatically. A “configuration complete” message will be displayed once an IP address has been assigned. • It is recommended that you note the remote camera IP address, as you will need it in subsequent steps. Enter the IP address and sub-net mask manually.
6 Highlight [Group name], press 2, and enter a group name. Enter a group name for the synchronized cameras. Group names can be up to eight characters long. • All master and remote cameras on the network must all be in the same group. 7 Highlight [Master/remote] and press 2. Choose a role for each camera from “master” and “remote”. • [Master camera]: Pressing the shutterrelease button on the master camera releases the shutters on the remote cameras. Each group can have only one master.
9 On the master camera, highlight [Remote camera list] and press 2. Cameras assigned the remote camera role in Step 7 are added to the master camera’s remote camera list. The master camera can store information for up to 10 remote cameras in slots [01] through [10]. 10 Highlight the desired slot and press 2. Remote camera options will be displayed. 11 Highlight [Address] and press 2. You will be prompted to enter an IP address.
12 Enter the remote camera IP address. Enter the IP address you noted in Step 5. • Rotate the main command dial to highlight segments. • Press 4 or 2 to change the highlighted segment and press J to proceed. • Press X to add the remote camera to the master camera remote camera list and establish a connection.
13 Add the remaining remote cameras. The master camera shows the number of cameras in the group currently connected or not connected. 14 Take pictures. • Pressing the shutter-release button on the master camera releases the shutters on the remote cameras. • Note that the standby timers will not expire automatically when the cameras are in synchronized release mode.
A Suspending Synchronized Release To temporarily disable synchronized release without ending the camera’s connection to the network, select [OFF] for [Connect to other cameras] > [Synchronized release] in the network menu. A Viewing Remote Camera Status To view remote camera status, highlight [Remote camera list] on the master camera and press 2. • Remote cameras are identified by IP address. • Remote camera status is displayed as follows: - [Connected]: Normal connection.
• 420 To edit remote camera settings from the master camera, highlight the camera in the remote camera list and press 2. - To temporarily suspend the connection to the selected camera, select [OFF] for [Connect to remote camera]. - To temporarily suspend synchronized release on the selected camera, select [OFF] for [Synchronized release]. - If desired, you can then edit the camera’s IP address by highlighting [Address] and pressing 2. To reconnect, select [ON] for [Connect to remote camera].
Synchronizing Camera Clocks When the cameras are connected to the network using [Connect to other cameras] in the network menu, the clocks on all cameras in the current group connected can be set to the time and date reported by the master camera. Synchronization applies to all options in the setup menu [Time zone and date] display. 1 Connect the cameras to the network using [Connect to other cameras] > [Network settings] in the network menu. For more information, see “Synchronized Release” (0 402).
Flash Photography “On-Camera” Versus “Remote” You can take pictures using an optional flash unit mounted on the camera accessory shoe or one or more remote flash units. • When using a flash, select [OFF] for [Silent mode] in the setup menu. Camera-Mounted Flash Units Take pictures using a flash unit mounted on the camera. See the following pages for more information (0 423).
Using an On-Camera Flash 1 Mount a flash unit on the camera accessory shoe. See the documentation supplied with each Speedlight for information on mounting the unit on the camera. 2 Turn on the camera and flash unit. The flash will begin charging; the flash-ready indicator (c) will appear in the shooting display when charging is complete. 3 Choose the flash control mode (0 426) and flash mode (0 429). 4 Adjust shutter speed and aperture. 5 Take pictures.
D Shutter Speed Shutter speed can be set as follows when an optional flash unit is used: Shooting mode P, A S M Shutter speed Set automatically by camera (1/200 s–1/60 s) * 1/ 200 s–30 s 1/ 200 s–30 s, Bulb, Time * Shutter speed may be set as slow as 30 s if slow sync, slow rear-curtain sync, or slow sync with red-eye reduction is selected for flash mode.
D i-TTL Flash Control When an optional flash unit that supports the Nikon Creative Lighting System is attached and set to TTL, the camera uses monitor pre-flashes for balanced or standard “i-TTL fill-flash” flash control. i-TTL flash control is not available with flash units that do not support the Nikon Creative Lighting System.
Flash Control Mode When a flash unit that supports unified flash control (an SB-5000, SB-500, SB-400, or SB-300; 0 428) is mounted on the camera, the flash control mode, flash level, and other flash settings can be adjusted using the [Flash control] > [Flash control mode] item in the photo shooting menu. The flash control modes available vary with the flash used. The options available in the flash control display vary with the option selected for [Flash control mode].
Option Description • [Auto external flash] • • • [Distancepriority manual] [Manual] • • • • • [Repeating flash] • Light from the flash is reflected from the subject to an auto external flash sensor and flash output adjusted automatically. Output can be adjusted using [Auto external flash compensation]. Auto external flash supports “auto aperture” (qA) and “non-TTL auto” (A) modes. For details, see the documentation provided with the flash unit.
D Unified Flash Control Unified flash control allows the camera and flash unit to share settings. Changes to flash settings made with either the camera or flash unit are reflected on both devices, as are changes made using optional Camera Control Pro 2 software. The flash unit must support unified flash control.
Flash Modes To choose the flash mode, hold the c button and rotate the main command dial. • The options available vary with the shooting mode. Option I [Fill flash] (front-curtain sync) Description Available in This mode is recommended in most situations. In modes P and A, shutter speed will automatically be set to P, S, A, M values between 1/200 s (or 1/8000 s with auto FP high-speed sync) and 1/ s.
Option J [Red-eye reduction] Description Available in Use for portraits. The flash fires before the photograph is taken, reducing “red-eye”. • A flash unit with red-eye reduction is required. • The desired results may not be achieved if the subject or camera P, S, A, M moves before the shutter is released (this setting is not recommended with moving subjects or in other situations requiring a quick shutter response).
Option M s [Rear-curtain sync] [Flash off] Description Available in The flash fires just before the shutter closes, creating the effect of a stream of light behind moving light sources. • Selecting mode P or A after choosing this option sets the flash P, S, A, M mode to slow sync. • Note that photos may be prone to blurring due to camera shake at slow shutter speeds. • Use of a tripod is recommended. The flash does not fire.
Flash Compensation Flash compensation is used to deliberately alter flash output, for example in order to change the brightness of the subject relative to the background. Flash output can be increased to make the main subject appear brighter, reduced to prevent glare, or otherwise fine-tuned to produce the desired result. Adjusting Flash Compensation Hold the c button and rotate the sub-command dial. • Choose from values of from −3 to +1 EV.
• In general, choose positive values for brighter lighting, negative values to ensure that the subject is not too brightly lit. • At values other than ±0.0, a Y icon will appear in the shooting display and the control panel. • Flash compensation can be viewed in the shooting display and control panel by pressing the c button. Monitor Control panel • Normal flash output can be restored by setting flash compensation to ±0.0. Flash compensation is not reset when the camera is turned off.
FV Lock This feature is used to lock flash output for optional CLS-compatible flash units, letting you take multiple photos or recompose shots without changing the flash level. Your subject need not be in the center of the frame, giving you more freedom when composing shots. • Flash output is adjusted automatically for any changes in ISO sensitivity and aperture. 1 Assign [FV lock] to a control using Custom Setting f2 [Custom controls (shooting)].
3 Turn the flash unit on and choose a flash control mode of TTL or monitor pre-flash qA or A. • If you are using an SB-5000, SB-500, SB-400, or SB-300 mounted on the camera accessory shoe, choose [TTL] or [Auto external flash] for [Flash control] > [Flash control mode]. • For information on other flash units, see the documentation provided with the unit. 4 Focus. Position the subject in the center of the frame and press the shutterrelease button halfway to focus.
5 Lock flash level. • After confirming that the flash-ready indicator (c) appears in the shooting display, press the [FV lock] control; the flash unit will emit a monitor pre-flash to determine the appropriate flash level. • Flash output will lock and an FV lock icon (r) will appear in the shooting display. 6 Recompose the shot. 7 Press the shutter-release button the rest of the way down to shoot. If desired, additional pictures can be taken without releasing FV lock.
Remote Flash Photography What Is Remote Flash Photography? Take pictures with one or more remote flash units using wireless flash control (Advanced Wireless Lighting, or AWL). For information on using a flash unit mounted on the camera accessory shoe, see “Flash Photography” (0 422). Throughout this chapter, operations involving an accessory connected to the camera are indicated by C, operations involving remote flash units by f.
Using Remote Flash Units Remote flash units can be controlled via: • radio signals * (0 439), • optical signals from a flash unit mounted on the camera accessory shoe (0 453), or • radio signals, with additional lighting provided by a shoe-mounted flash unit * (0 452). * Radio flash control is available only when a WR-R11a or WR-R10 is connected to the camera.
Radio AWL Remote flash control provided via radio signals from a WR-R11a or WR-R10 connected to the camera is termed “radio Advanced Wireless Lighting”, or “radio AWL”. Radio AWL is available with SB-5000 flash units. Establishing a Wireless Connection Before using radio AWL, establish a wireless connection between the WR-R11a or WR-R10 and the remote flash units. D The WR-R10 Wireless Remote Controller • • A WR-A10 adapter is required when using the WR-R10.
2 C: Select [Radio AWL] for [Flash control] > [Wireless flash options] in the photo shooting menu. 3 C: Choose a channel for the WR-R11a/ WR-R10. Set the WR-R11a/WR-R10 channel selector to the desired channel.
4 C: Choose a link mode for the WR-R11a/WR-R10. Select [Wireless remote (WR) options] > [Link mode] in the camera setup menu and choose from the following options: Option [Pairing] [PIN] Description The camera connects only to devices with which it has previously been paired. • As camera will not communicate with devices with which it has not been paired, this option can be used to prevent signal interference from other devices in the vicinity.
5 f: Establish a wireless connection between the WR-R11a/ WR-R10 and the remote flash units. • Set the remote units to radio AWL remote mode. • Set the remote units to the channel you selected for the WR-R11a/ WR-R10 in Step 3. • Pair each of the remote units with the WR-R11a/WR-R10 according to the option selected in Step 4: - [Pairing]: Initiate pairing on the remote unit and press the WR-R11a/WR-R10 pairing button.
7 f: Confirm that the flash-ready lights for all flash units are lit. In radio AWL, the flash-ready indicator will light in the camera shooting display when all flash units are ready. D Listing Remote Flash Units To view the flash units currently controlled using radio AWL, select [Flash control] > [Radio remote flash info] in the camera photo shooting menu. • The identifier (remote flash unit name) for each unit can be changed using flash unit controls.
Remote Flash Photography Settings are adjusted using [Flash control] > [Remote flash control] in the photo shooting menu. Choose a remote flash control mode and take pictures as described below. ❚❚ Group Flash Select this item if you want to adjust settings separately for the flash units in each group. 1 C: Select [Group flash] for [Flash control] > [Remote flash control]. 2 C: Highlight [Group flash options] in the [Flash control] display and press 2.
3 C: Choose a flash control mode and flash level. • Choose a flash control mode and flash level for the flash units in each group. • The following options are available: Option TTL qA M –– (off) Description i-TTL flash control. Auto aperture. Available only with compatible flash units. Choose the flash level manually. The remote units do not fire. [Comp.] cannot be adjusted. 4 f: Group the remote flash units. • Choose a group (A–F) for each of the remote flash units.
5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • Test-fire the units and confirm that they are functioning normally. To test-fire the units, use the [Test flash] item in the i menu, which can be added to the menu using Custom Setting f1 [Customize i menu]. 6 C: Take the photograph.
❚❚ Quick Wireless Control Select this item to control the relative balance between the remote flash units in groups A and B and adjust flash output for group C. Output for group C is adjusted manually. 1 C: Select [Quick wireless control] for [Flash control] > [Remote flash control]. 2 C: Highlight [Quick wireless control options] in the [Flash control] display and press 2.
3 C: Adjust quick wireless control settings. • Choose the balance between groups A and B. • Adjust flash compensation for groups A and B. • Adjust settings for group C: - Select [M] to enable or [––] to disable the units in group C. - When [M] is selected, the units in group C will fire at the chosen output.
4 f: Group the remote flash units. • Choose a group (A, B, or C). • The master flash can control up to 18 flash units in any combination. 5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • Test-fire the units and confirm that they are functioning normally. To test-fire the units, use the [Test flash] item in the i menu, which can be added to the menu using Custom Setting f1 [Customize i menu]. 6 C: Take the photograph.
❚❚ Remote Repeating The flash units fire repeatedly while the shutter is open, producing a multiple-exposure effect. 1 C: Select [Remote repeating] for [Flash control] > [Remote flash control]. 2 C: Highlight [Remote repeating options] in the [Flash control] display and press 2. 3 C: Adjust remote repeating options. • Adjust “output”, “times”, and “frequency”. • Enable or disable selected groups. - Select [ON] to enable or [––] to disable the selected group.
4 f: Group the remote flash units. • Choose a group (A–F) for each of the remote flash units. • The master flash can control up to 18 flash units in any combination. 5 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information. • Test-fire the units and confirm that they are functioning normally. To test-fire the units, use the [Test flash] item in the i menu, which can be added to the menu using Custom Setting f1 [Customize i menu].
Adding a Shoe-Mounted Flash Unit Radio-controlled flash units (0 439) can be combined with any of the following flash units mounted on the camera accessory shoe: • SB-5000: Before attaching the flash unit, set it to radio-controlled master flash mode (a d icon will appear at the top left corner of the display) and choose group or remote-repeating flash control. Once the unit is attached, settings can be adjusted from the camera menus or using the controls on the SB-5000.
Optical AWL Remote flash units can be controlled via optical signals from an optional flash unit mounted on the camera accessory shoe and functioning as a master flash (optical AWL). For information on compatible flash units, see “Features Available with CLSCompatible Flash Units” (0 816). • If the flash unit in question is an SB-5000 or SB-500, settings can be adjusted from the camera. For more information, see “Using Optical AWL with the SB-5000 or SB-500” (0 454).
Using Optical AWL with the SB-5000 or SB-500 Mount the flash unit on the camera accessory shoe. Select [Optical AWL] for [Flash control] > [Wireless flash options] in the photo shooting menu and choose a remote flash control mode (the SB-500 supports only [Group flash]). Choose a remote flash control mode and take pictures as described below. D The SB-5000 When an SB-5000 is mounted on the camera accessory shoe, [Flash control] settings can also be changed using the controls on the flash unit.
3 C: Adjust flash output and choose the channel and flash control mode. • Choose the flash control mode and flash level for the master flash and the remote flash units in each group. • The following options are available: Option TTL Description i-TTL flash control. qA Auto aperture. Available only with compatible flash units. M –– (off) Choose the flash level manually. The remote units do not fire. [Comp.] cannot be adjusted.
5 f: Group the remote flash units. • Choose a group (A, B, or C). • If you are using an SB-500 as the master flash, choose from groups A and B. • There is no limit on the number of remote flash units that may be used. The practical maximum, however, is three per group, as the light emitted by the remote flash units will interfere with performance if more flash units are used. 6 C/f: Compose the shot and arrange the flash units. • See the documentation provided with the flash units for more information.
❚❚ Quick Wireless Control (SB-5000 Only) Select this item to control the relative balance between the remote flash units in groups A and B and adjust flash output for group C. Output for group C is adjusted manually. 1 C: Select [Quick wireless control] for [Flash control] > [Remote flash control]. 2 C: Highlight [Quick wireless control options] in the [Flash control] display and press 2.
3 C: Adjust quick wireless control settings. • Choose the balance between groups A and B. • Adjust flash compensation for groups A and B. • Adjust settings for group C: - Select [M] to enable or [––] to disable the units in group C. - When [M] is selected, the units in group C will fire at the chosen output. • Choose the channel. - For [Channel], choose the channel (1– 4) the master flash will use for optical remote flash control.
4 f: Choose a channel for the remote flash units. Set the remote flash units to the channel selected for [Channel] in Step 3. 5 f: Group the remote flash units. • Choose a group (A, B, or C). • There is no limit on the number of remote flash units that may be used. The practical maximum, however, is three per group, as the light emitted by the remote flash units will interfere with performance if more flash units are used. 6 C/f: Compose the shot and arrange the flash units.
❚❚ Remote Repeating (SB-5000 Only) The flash units fire repeatedly while the shutter is open, producing a multiple-exposure effect. 1 C: Select [Remote repeating] for [Flash control] > [Remote flash control]. 2 C: Highlight [Remote repeating options] in the [Flash control] display and press 2.
3 C: Adjust remote repeating options. • Adjust “output”, “times”, and “frequency”. • Enable or disable selected groups. - Select [ON] to enable or [––] to disable the selected group. • Choose the channel. - For [Channel], choose the channel (1– 4) the master flash will use for optical remote flash control. - If the remote flash units include an SB-500, you must choose Channel [3].
4 f: Choose a channel for the remote flash units. Set the remote flash units to the channel selected for [Channel] in Step 3. 5 f: Group the remote flash units. • Choose a group (A, B, or C). • There is no limit on the number of remote flash units that may be used. The practical maximum, however, is three per group, as the light emitted by the remote flash units will interfere with performance if more flash units are used. 6 C/f: Compose the shot and arrange the flash units.
D Optical AWL • Position the sensor windows on the remote flash units to pick up the light from the master flash. Particular care is required if the master flash is mounted on a hand-held camera. • Be sure that direct light or strong reflections from the remote flash units do not enter the camera lens (in [TTL] mode) or the photocells on the remote flash units ([qA] mode). Otherwise light from the flash units may interfere with exposure.
Menu Guide Defaults The defaults for the photo shooting, video recording, Custom Settings, playback, setup, and network menus are listed below.
Photo shooting menu option [ISO sensitivity settings] [ISO sensitivity] Default 100 [Auto ISO sensitivity control] ON [Maximum sensitivity] [Maximum sensitivity with c] 25600 Same as without flash [Minimum shutter speed] [White balance] [Fine-tune] [Choose color temperature] Auto Auto: Keep white (reduce warm colors) A-B: 0, G-M: 0 5000 K [Preset manual] [Set Picture Control] d-1 Auto [Manage Picture Control] [Color space] — sRGB [Active D-Lighting] [Long exposure NR] Off OFF [High ISO NR] [Vi
Photo shooting menu option [Flash control] [Flash control mode] [Wireless flash options] [Remote flash control] [Focus mode] [AF-area mode] [AF subject detection options] [Vibration reduction] [Auto bracketing] [Auto bracketing set] [Number of shots] [Increment] [Multiple exposure] [Multiple exposure mode] [Number of shots] [Overlay mode] [Save individual pictures (RAW)] [Overlay shooting] [Select first exposure (RAW)] [HDR overlay] [HDR mode] [HDR strength] [Save individual pictures (RAW)] 466 Defaults
Photo shooting menu option [Interval timer shooting] [Choose start day/time] [Interval] Default Now 1 min. [Intervals×shots/interval] [Exposure smoothing] 0001×1 ON [Interval priority] [Focus before each shot] OFF OFF [Options] [Starting storage folder] Off [New folder] [Reset file numbering] [Time-lapse video] [Interval] [Shooting time] [Exposure smoothing] [Choose image area] [Video file type] U U 5s 25 min. ON FX H.
Photo shooting menu option [Focus shift shooting] [No.
Video recording menu option [ISO sensitivity settings] [Maximum sensitivity] [Auto ISO control (mode M)] [ISO sensitivity (mode M)] [White balance] [Fine-tune] [Choose color temperature] [Preset manual] [Set Picture Control] [Manage Picture Control] [HLG quality] Default 25600 ON 100 Same as photo settings A-B: 0, G-M: 0 5000 K d-1 Same as photo settings — [Quick sharp] [Contrast] 0 0 [Saturation] [Hue] 0 0 [Active D-Lighting] [High ISO NR] Off Normal [Vignette control] [Diffraction compensation] N
Video recording menu option [AF subject detection options] [Subject detection] [AF when subject not detected] [Vibration reduction] [Electronic VR] [Microphone sensitivity] [Attenuator] Auto ON Same as photo settings OFF Auto OFF [Frequency response] [Wind noise reduction] Wide range OFF [Mic jack plug-in power] [Headphone volume] ON 15 [Timecode] [Record timecodes] 470 Default Off [Count-up method] [Timecode origin] Record run — [Drop frame] [External rec.
Custom Settings Menu Defaults Custom Settings menu option [Custom Settings bank] Default A a1 a2 [AF-C priority selection] [AF-S priority selection] Release Focus a3 [Focus tracking with lock-on] [Blocked shot AF response] a4 [Subject motion] [Focus points used] a5 a6 [Store points by orientation] [AF activation] a7 a8 [Focus point persistence] [Limit AF-area mode selection] [Pinpoint AF] [Single-point AF] [Dynamic-area AF (S)] [Dynamic-area AF (M)] [Dynamic-area AF (L)] [Wide-area AF (S)] [Wide
Custom Settings menu option a9 [Focus mode restrictions] a10 [Focus point wrap-around] Default No restrictions OFF a11 [Focus point display] [Manual focus mode] [Dynamic-area AF assist] [AF-C in-focus display] a12 [Built-in AF-assist illuminator] a13 [Focus peaking] [Focus peaking display] [Focus peaking sensitivity] [Focus peaking highlight color] a14 [Manual focus ring in AF mode] b1 [ISO sensitivity step value] b2 b3 [EV steps for exposure cntrl] [Easy exposure compensation] b4 b5 [Matrix metering f
Custom Settings menu option c1 c2 c3 [Shutter-release button AE-L] [Self-timer] Default Off [Self-timer delay] 10 s [Number of shots] [Interval between shots] 1 0.
Custom Settings menu option d1 d2 d3 [Continuous shooting speed] [Continuous high-speed] 20 fps [Continuous low-speed] 5 fps [Maximum shots per burst] [Limit release mode selection] ∞ [Single frame] [Continuous L] [Continuous H] [C30] [C120] [Self-timer] d4 d5 [Sync.
Custom Settings menu option d10 [Warm display colors] [Warm display color options] [Warm color display brightness] d11 [LCD illumination] d12 [View all in continuous mode] Default Off 0 OFF ON d13 [Release timing indicator] d14 [Image frame] Type B ON d15 [Grid type] d16 [Virtual horizon type] 3×3 Type A d17 [Custom monitor shooting display] [Display 1] [Display 2] [Display 3] [Display 4] [Display 5] L (cannot be deselected) M M M M d18 [Custom viewfinder shooting display] [Display 1] L (cannot be d
Custom Settings menu option Default e1 e2 [Flash sync speed] [Flash shutter speed] 1/200 s 1/60 s e3 [Exposure comp. for flash] e4 e5 [Auto c ISO sensitivity control] [Modeling flash] e6 e7 [Auto bracketing (mode M)] [Bracketing order] e8 f1 [Flash burst priority] [Customize i menu] Defaults Entire frame Subject and background ON Flash/speed MTR > under > over Prioritize precise flash control Set Picture Control, White balance, Image quality, Image size, AF-area mode/subj.
Custom Settings menu option f2 [Custom controls (shooting)] [Fn1 button] [Fn2 button] [Fn3 button] [Fn button for vertical shooting] Default Shooting menu bank Choose image area Live view info display off Exposure compensation [Protect/Fn4 button] [AF-ON button] Set Picture Control AF-ON [Sub-selector center] [OK button] AE/AF lock Select center focus point [Audio button] [QUAL button] [Vertical multi selector center] [AF-ON button for vertical shooting] [Video record button] [Command dials] [Exposur
Custom Settings menu option f3 [Custom controls (playback)] [Fn1 button] None [Fn3 button] [Fn button for vertical shooting] None None [Protect/Fn4 button] [OK button] Protect Zoom on/off [Audio button] [QUAL button] Voice memo Rating [Vertical shooting multi selector] [Main command dial] [Frame advance] [Video playback] [Sub-command dial] [Frame advance] [Video playback] 478 [Video record button] [Control lock] Defaults None [Fn2 button] [WB button] f4 Default Select for upload to compute
Custom Settings menu option f5 [Reverse dial rotation] [Exposure compensation] [Shutter speed/aperture] f6 f7 [Release button to use dial] [Reverse indicators] f8 f9 [Reverse ring for focus] [Focus ring rotation range] f10 [Control ring response] f11 [Full-frame playback flicks] [Flick up] [Flick down] g1 [Flick advance direction] [Customize i menu] Default U U OFF OFF Non-linear High None None LeftVRight Set Picture Control, White balance, Frame size/frame rate, Microphone sensitivity, AF-area mo
Custom Settings menu option g2 [Custom controls] [Fn1 button] [Fn2 button] [Fn3 button] [Fn button for vertical shooting] Choose image area Live view info display off Exposure compensation Focus mode/AF-area mode AF-ON [Protect/Fn4 button] [OK button] Set Picture Control Select center focus point [Sub-selector center] [QUAL button] AE/AF lock None [Vertical multi selector center] [Command dials] [Exposure setting] [Focus/AF-area mode selection] [Sub-command dial zoom role] [Shutter-release button] [L
Custom Settings menu option g3 [Control lock] [Shutter speed lock] [Aperture lock] g4 [Focus-point lock] [Limit AF-area mode selection] Default OFF OFF OFF g6 [AF speed] [When to apply] g7 g8 [AF tracking sensitivity] [View assist] L (cannot be deselected) M M M M No restrictions 0 Always 4 OFF g9 [Zebra pattern] [Pattern tone range] Zebra pattern off [Single-point AF] [Wide-area AF (S)] [Wide-area AF (L)] [Subject-tracking AF] g5 [Auto-area AF] [Focus mode restrictions] [Pattern] [Highlight
Custom Settings menu option g11 [Grid type] g12 [Custom monitor shooting display] [Display 1] [Display 2] [Display 3] [Display 4] g13 [Custom viewfinder shooting display] [Display 1] [Display 2] [Display 3] 482 Defaults Default 3×3 L (cannot be deselected) M M M L (cannot be deselected) M M
Playback Menu Defaults Playback menu option [Delete] [Playback folder] [Playback display options] [Focus point] [Exposure info] [Highlights] [RGB histogram] [Shooting data] [Overview] [None (picture only)] [Basic shooting data] [Flash data] [Picture Control/HLG data] [Other shooting data] [Copyright info] [Location data] [IPTC data] [Delete pictures from both slots] [Dual-format recording PB slot] Default — All U U U U U U M M M M M M M M Yes (confirmation required) Slot 1 Defaults 483
Playback menu option [Filtered playback criteria] [Protect] [Picture type] [Rating] [Select for upload to computer] [Select for upload (FTP)] [Voice memo] [Retouched pictures] [Picture review] [After delete] [After burst, show] [Rotate tall] [Copy image(s)] 484 Defaults Default U U U U U U U Off Show next Last picture in burst ON —
Setup Menu Defaults Setup menu option [Format memory card] [Language] Default — (Default varies with country of purchase) [Time zone and date] [Time zone] [Date and time] [Date format] [Daylight saving time] [Monitor brightness] (Default varies with country of purchase) — (Default varies with country of purchase) OFF 0 [Monitor color balance] [Viewfinder brightness] A-B: 0, G-M: 0 Auto [Viewfinder color balance] [Finder display size (photo Lv)] A-B: 0, G-M: 0 Standard [Limit monitor mode selection]
Setup menu option [AF fine-tuning options] [AF fine-tune] OFF [Fine-tune and save lens] — [Default] [List saved values] — — [Choose value for current lens] [Non-CPU lens data] [Lens number] [Focal length (mm)] [Maximum aperture] [Save focus position] [Sensor shield behavior at power off] [Clean image sensor] [Automatic cleaning] [Image Dust Off ref photo] — 1 –– –– OFF Sensor shield stays open Clean at shutdown — [Pixel mapping] [Image comment] — [Attach comment] [Copyright information] Off [Att
Setup menu option Default [IPTC] [Edit/save] — [Delete] — [Auto embed during shooting] [Load/save] Off — [Voice memo options] [Voice memo control] [Audio output (playback)] [Camera sounds] Press and hold Speaker/headphones [Shutter sound] [Beep on/off] ON Off [Volume] [Pitch] 2 Low [Silent mode] [Touch controls] OFF [Enable/disable touch controls] [Glove mode] [HDMI] [Output resolution] [Output range] [Output shooting info] [Mirror camera info display] Enable OFF Auto Auto ON ON Defaults
Setup menu option [USB connection priority] [Location data (built-in)] Upload [Record location data] OFF [Standby timer] [Set clock from satellite] ON OFF [Create log] [Log list] [Position] [Wireless remote (WR) options] [LED lamp] [Link mode] [Assign remote (WR) Fn button] [Conformity marking] [Battery info] [USB power delivery] [Energy saving (photo mode)] [Slot empty release lock] 488 Default — — — ON Pairing None — — ON OFF Enable release [Save/load menu settings] [Reset all settings] — — [F
Network Menu Defaults Network menu option [Airplane mode] [Wired LAN] [Connect to smart device] Default OFF OFF [Pairing (Bluetooth)] [Bluetooth connection] OFF [Select pictures for upload] [Auto select for upload] ON [Wi-Fi connection] [Upload while off] — ON [Location data (smart device)] [Connect to computer] — [Network settings] [Connection type] — Picture transfer [Options] [Auto upload] OFF [Delete after upload] [Upload RAW + JPEG as] [JPEG+JPEG slot selection] [Upload folder] [Deselect
Network menu option [Connect to FTP server] [Network settings] Default — [Options] [Auto upload] [Delete after upload] [Upload RAW + JPEG as] [JPEG+JPEG slot selection] RAW + JPEG Slot 1 [Overwrite if same name] [Protect if marked for upload] OFF OFF [Upload marking] [Upload folder] OFF — [Deselect all?] [Connect to other cameras] [Synchronized release] [Network settings] [Group name] [Master/remote] [Remote camera list] [Synchronize date and time] [USB] [Start via LAN] [Router frequency band] [MAC
C The Photo Shooting Menu: Shooting Options To view the photo shooting menu, select the C tab in the camera menus.
[Multiple exposure] [HDR overlay] 0 528 537 [Interval timer shooting] 542 Item Item [Time-lapse video] [Focus shift shooting] D See Also “Photo Shooting Menu Defaults” (0 464) 492 C The Photo Shooting Menu: Shooting Options 0 556 568
Shooting Menu Bank G button U C photo shooting menu Photo shooting and video recording menu options are stored in one of four banks (banks “A” through “D”) that can be selected using [Shooting menu bank]. With the exceptions noted below, changes to settings made while one bank is selected are not applied to the remaining banks.
A Shooting Menu Banks The control panel shows the current menu bank (“A”, “B”, “C”, or “D”). Renaming Shooting Menu Banks A descriptive caption can be added to the bank name (“A”, “B”, “C”, or “D”) by highlighting the bank, pressing 2, and selecting [Rename]. Captions can be up to 20 characters long. Copying Shooting Menu Banks To create a copy of a shooting menu bank, highlight the bank, press 2, select [Copy], and choose a destination for the copy.
Restoring Default Settings You can restore default settings for a selected shooting menu bank. To do so, highlight the bank and press O (Q); a confirmation dialog will be displayed. Highlight [Yes] and press J to restore default settings for the selected bank. • Shooting menu banks cannot be reset while a multiple exposure is in progress. • [Storage folder] and [Manage Picture Control] are not reset.
Extended Menu Banks G button U C photo shooting menu Select [ON] to include exposure settings in the information recorded in each of the four shooting menu banks • Changes to exposure settings will be stored in the bank currently selected for [Shooting menu bank]. The settings stored in the bank will be recalled the next time the bank is selected.
Storage Folder G button U C photo shooting menu Choose the folder in which subsequent pictures will be stored. 1 2 3 1 2 Folder Folder number Folder name 3 D “Storage Folder” Changes to [Storage folder] made in the photo shooting menu apply in the video recording menu and vice versa. Renaming Folders The default folder name, which appears after the folder number, is “NCZ_9”. To choose a different five-character folder name for new folders, select [Rename]. • Existing folders cannot be renamed.
Select Folder by Number The folder in which subsequent pictures will be stored can be selected by number. If a folder with the specified number does not already exist, a new folder will be created. 1 Choose [Select folder by number]. • Highlight [Select folder by number] and press 2 to display the [Select folder by number] dialog. • The card on which the new folder will be created is underlined in the card slot display area at the top right corner of the [Select folder by number] dialog.
3 Save changes and exit. • If a folder with the selected number already exists, a W, X, or Y icon will be displayed to the left of the folder number. Press J to complete the operation and return to the main menu; if you chose a folder marked W or X, it will be selected as the folder for new pictures. • If you chose a folder number that does not already exist, a new folder will be created with that number when you press J. • In either case, subsequent pictures will be stored in the chosen folder.
Select Folder from List To choose from a list of existing folders: 1 Choose [Select folder from list]. Highlight [Select folder from list] and press 2 to display the [Select folder from list] dialog. 2 Highlight a folder. Press 1 or 3 to highlight a folder. 3 Select the highlighted folder. • Press J to select the highlighted folder and return to the main menu. • Subsequent photographs will be stored in the selected folder.
D Cautions: Folder and File Numbers • When the current folder number reaches 999, the camera will no longer be able to create new folders and the shutter release will be disabled if: - the current folder contains 5000 pictures (in addition, video recording will be disabled if the camera calculates that the number of files needed to record a video of the maximum length would result in the folder containing over 5000 files), or - the current folder contains a picture numbered 9999 (in addition, video recordi
File Naming G button U C photo shooting menu Pictures are saved using file names consisting of “DSC_” followed by a four-digit number and a three-letter extension. [File naming] is used to select three letters to replace the “DSC” portion of the file name. For information on text entry, see “Text Entry” (0 64). D File Names • File names take the form “DSC_nnnn.
Role Played by Card in Slot 2 G button U C photo shooting menu Choose the role played by the card in Slot 2 when two memory cards are inserted in the camera. Option P [Overflow] Q [Backup] Description The card in Slot 2 is used only when the card in Slot 1 is full. Each picture is recorded twice, once to the card in Slot 1 and again to the card in Slot 2.
D Caution: [RAW Slot 1 - JPEG Slot 2] If [ON] is selected for [Multiple exposure] > [Save individual pictures (RAW)] in the photo shooting menu, or if [ON] is selected for [HDR overlay] > [Save individual pictures (RAW)] in the photo shooting menu, unprocessed copies of the individual NEF (RAW) photos that make up each multiple exposure or HDR picture will be recorded to both memory cards together with the JPEG composite, regardless of the option selected for image quality.
Deleting Copies When deleting pictures recorded using [Backup], [RAW Slot 1 -JPEG Slot 2], or [JPEG Slot 1 - JPEG Slot 2], you have the choice of erasing either both copies or only the copy on the card in the current slot. • Pressing O (Q) when a picture created using either of these options is highlighted during playback displays a confirmation message. • To delete only the copy on the card in the current slot, highlight [Selected picture] and press O (Q) again.
Image Area G button U C photo shooting menu Adjust image area settings. For more information, see “Adjusting Image Area Settings” (0 102), part of the section on “Image Recording Options (Image Area, Quality, and Size)” in the “Shooting Settings” chapter. Image Quality G button U C photo shooting menu Choose a file format for photographs.
Image Size G button U C photo shooting menu Choose the size, in pixels, of pictures recorded with the camera. For more information, see “Choosing an Image Size” (0 108), part of the section on “Image Recording Options (Image Area, Quality, and Size)” in the “Shooting Settings” chapter. RAW Recording G button U C photo shooting menu Choose a compression type for NEF (RAW) photographs.
ISO Sensitivity Settings G button U C photo shooting menu Adjust ISO sensitivity settings for photographs. Option [ISO sensitivity] [Auto ISO sensitivity control] [Maximum sensitivity] [Maximum sensitivity with c] 508 Description Choose from settings of ISO 64 to 25600; the camera also supports settings below ISO 64 by about 0.3, 0.7, and 1 EV (ISO 32 equivalent) and above ISO 25600 by about 0.3, 0.7, 1, and 2 EV (ISO 102400 equivalent). Select [ON] to enable auto ISO sensitivity control.
Option [Minimum shutter speed] Description Choose the shutter speed below which auto ISO sensitivity control will kick in to prevent underexposure in modes P and A; options range from 1/16,000 to 30 s. If [Auto] is selected, the camera will choose the minimum shutter speed based on lens focal length. For example, the camera will automatically choose faster minimum shutter speeds to prevent blur caused by camera shake when a long lens is attached.
White Balance G button U C photo shooting menu Adjust white balance to match the color of the light source. For more information, see “White Balance” (0 158) in the “Shooting Settings” chapter. Set Picture Control G button U C photo shooting menu Choose image processing (“Picture Control”) options for new photos according to the scene or your creative intent. For more information, see “Picture Controls” (0 192) in the “Shooting Settings” chapter.
Color Space G button U C photo shooting menu The color space determines the gamut of colors available for color reproduction. [sRGB] is recommended for general-purpose printing and display. With a broader gamut of colors than [sRGB], [Adobe RGB] is a better choice for professional publication and commercial printing. D Caution: Color Space The selected color space may be overwritten when pictures are opened in third-party software. NX Studio can open pictures in the color space selected on the camera.
Active D-Lighting G button U C photo shooting menu Preserve details in highlights and shadows, creating pictures with natural contrast. Use for high-contrast scenes, for example when photographing brightly-lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny day. Active D-Lighting is most effective when used with matrix metering.
The option currently selected is shown by an icon in the display during shooting. D Cautions: Active D-Lighting • “Noise” in the form of randomly-spaced bright pixels, fog, or lines may appear in photos taken with Active D-Lighting. • In mode M, [Y Auto] is equivalent to [Q Normal]. • Uneven shading may be visible with some subjects. • This function does not apply at high ISO sensitivities (Hi 0.3–Hi 2.0), including high sensitivities selected via auto ISO sensitivity control.
Long Exposure NR G button U C photo shooting menu Select [ON] to reduce “noise” (bright spots or fog) in photographs taken at shutter speeds slower than 1 s. • Long-exposure noise reduction is performed after the photo is taken. During processing, the message, “[Performing noise reduction]” will appear in the shooting display and “Job NR” will flash in the control panel. Pictures cannot be taken until the message has cleared from the display.
High ISO NR G button U C photo shooting menu Photographs taken at high ISO sensitivities can be processed to reduce “noise” (randomly-spaced bright pixels). Option [High] [Normal] [Low] [Off] Description Reduce noise in photographs taken at all ISO sensitivities. The higher the sensitivity, the greater the effect. Choose the amount of noise reduction performed from (in order from high to low) [High], [Normal], and [Low]. Noise reduction is performed only as required.
Vignette Control G button U C photo shooting menu Vignette control reduces “vignetting”—a drop in brightness at the edges of a photograph—by an amount that varies from lens to lens. Its effects are most noticeable at maximum aperture. Option e [High] g [Normal] f [Low] [Off] Description Choose the amount of vignette control performed from (in order from high to low) [High], [Normal], and [Low]. Vignette control disabled.
Diffraction Compensation G button U C photo shooting menu Select [ON] to reduce diffraction at small apertures (high f-numbers). D Diffraction Compensation Changes to [Diffraction compensation] in the photo shooting menu apply in the video recording menu and vice versa. Auto Distortion Control G button U C photo shooting menu Select [ON] as required to reduce barrel distortion when shooting with wide-angle lenses and to reduce pin-cushion distortion when shooting with long lenses.
Photo Flicker Reduction G button U C photo shooting menu Selecting [ON] reduces the effects of flicker from such light sources as fluorescent or mercury-vapor lamps. • Flicker can cause uneven exposure or (in photographs taken in continuous release modes) inconsistent exposure or coloration. • If flicker reduction does not produce the desired results, turn the camera off and aim it at the subject or light source before turning it on again.
D “[Photo Flicker Reduction]” • • Flicker reduction may slightly delay shutter response. Flicker reduction can detect flicker at 100 and 120 Hz (associated respectively with AC power supplies of 50 and 60 Hz). The desired results may not be achieved if the frequency of the power supply changes during burst photography.
Metering G button U C photo shooting menu Metering determines how the camera sets exposure. Option L M N Description The camera meters a wide area of the frame and [Matrix sets exposure according to tone distribution, color, metering] composition, and distance for results close to those seen by the naked eye. • The camera assigns the greatest weight to the center of the frame. This mode can, for example, be used with subjects that dominate the composition.
Flash Control G button U C photo shooting menu Adjust settings for wireless remote flash units or optional flash units mounted on the camera accessory shoe. • For information on adjusting settings for optional flash units mounted on the camera accessory shoe, see “Flash Photography” (0 422). • For information on adjusting settings for wireless remote flash units, see “Remote Flash Photography” (0 437).
Flash Control Mode Choose a flash control mode and flash level and adjust other settings for SB-5000, SB-500, SB-400, or SB-300 flash units mounted on the camera accessory shoe. • The options available in the flash control display vary with the option selected for [Flash control mode]. • Settings for flash units other than the SB-5000, SB-500, SB-400, and SB-300 can only be adjusted using flash unit controls.
Wireless Flash Options Adjust settings for simultaneous wireless control of multiple remote flash units. This option is available only when an SB-5000 or SB-500 flash unit or a WR-R11a or WR-R10 wireless remote controller is mounted on the camera. Option Y [Optical AWL] Z [Radio AWL] [Off] Description The remote flash units are controlled using lowintensity flashes emitted by the master flash (0 453).
Remote Flash Control Choose the remote flash control mode. Flash options can be adjusted in the flash control display; the options available vary with the option selected for [Remote flash control]. Option Description [Group flash] Choose a separate flash control mode for each group of remote flash units (0 444, 454). [Quick wireless control] [Remote repeating] Choose the balance between groups A and B and adjust output for group C manually (0 447, 457).
Focus Mode G button U C photo shooting menu Control how the camera focuses. For more information, see “Choosing a Focus Mode” (0 110), part of the section on “Focus” in the “Shooting Settings” chapter. AF-Area Mode G button U C photo shooting menu Choose how the camera selects the focus point for autofocus. For more information, see “Choosing an AF-Area Mode” (0 113), part of the section on “Focus” in the “Shooting Settings” chapter.
Vibration Reduction G button U C photo shooting menu Choose whether to enable vibration reduction. The options available vary with the lens. Option C [Normal] D [Sport] [Off] Description Choose for enhanced vibration reduction when photographing static subjects. Choose when photographing athletes and other subjects that are moving rapidly and unpredictably. Vibration reduction is disabled. D Cautions: Using Vibration Reduction • • Vibration reduction may be unavailable with some lenses.
• [Normal] and [Sport] are also recommended if the camera is mounted on a tripod or monopod. Note, however, that [Off] may be a better choice with some tripods depending on shooting conditions. Settings may vary from lens to lens; consult the lens documentation for more information. • If an F mount lens with a vibration reduction switch is attached via an optional FTZ II/FTZ mount adapter, [Vibration reduction] will be grayed out and unavailable. Use the lens switch for vibration reduction.
Multiple Exposure G button U C photo shooting menu Record two to ten NEF (RAW) exposures as a single photograph. Option Description [On (series)]: Take a series of multiple exposures. To end multiple exposure photography, select [Multiple exposure mode] again and choose [Off]. • [On (single photo)]: End multiple exposure photography after creating a single multiple exposure. • [Off]: End multiple exposure photography. Choose the number of exposures that will be combined to form a single photograph.
Option Description • [Add]: The exposures are overlaid without modification; gain is not adjusted. • [Average]: Gain is adjusted before the exposures are overlaid. The gain for each exposure is equal to 1 divided by the total number of exposures taken. For example, in a photo made by combining two exposures, the gain for each exposure will be set to 1/2, while in a photo combining three exposures, gain will be set to 1/3.
Creating a Multiple Exposure 1 Highlight [Multiple exposure] in the photo shooting menu and press 2. 2 Choose an option for [Multiple exposure mode]. • Highlight [Multiple exposure mode] and press 2. • Highlight a multiple exposure mode using 1 or 3 and press J. • If [On (series)] or [On (single photo)] is selected, an icon will appear in the display. 3 Choose a value for [Number of shots] (number of exposures). • Highlight [Number of shots] and press 2.
4 Select an [Overlay mode]. • Highlight [Overlay mode] and press 2. • Highlight an option using 1 or 3 and press J. 5 Choose a setting for [Save individual pictures (RAW)]. To save both the multiple exposure and the shots that make it up, select [ON]; the individual shots are saved in NEF (RAW) format. To save only the multiple exposure, select [OFF].
6 Choose an option for [Overlay shooting]. Select [ON] to superimpose earlier exposures on the view through the lens. You can use the earlier exposures as a guide when composing subsequent shots. 7 Choose an option for [Select first exposure (RAW)]. • To choose the first exposure from existing NEF (RAW) photos, highlight [Select first exposure (RAW)] and press 2. • Highlight the desired picture using the multi selector. • To view the highlighted picture full screen, press and hold the X button.
8 Start shooting. • Take the selected number of shots. If you used [Select first exposure (RAW)] to select an existing NEF (RAW) picture as the first exposure in Step 7, shooting will start from the second exposure. • Once you have taken the selected number of shots, the pictures will be overlaid to create a multiple exposure. Multiple exposures are recorded in JPEG format regardless of the option selected for image quality.
❚❚ The i Menu Pictures can be viewed by pressing the K button while a multiple exposure is in progress. The most recent shot in the current multiple exposure is indicated by a $ icon; pressing the i button when this icon is present displays the multiple exposure i menu. • Highlight items and press J to select. • You also have the option of using touch controls after pressing the i button. Option [View progress] [Retake last exposure] Retake the most recent exposure.
D Cautions: Multiple Exposure • • • • • • • • If you use the menus or view pictures in the display while shooting a multiple exposure, remember that shooting will end and the multiple exposure will be recorded if no operations are performed for about 40 seconds (or in the case of menus, about 90 seconds). The time available to record the next exposure can be extended by choosing longer times for Custom Setting c3 [Power off delay] > [Playback] or [Menus].
D Multiple Exposure: Restrictions Multiple exposure cannot be combined with some camera features, including: • video recording, • high-speed frame capture, • bracketing, • HDR overlay, • interval-timer photography, • time-lapse video recording, and • focus shift. ❚❚ Ending Multiple Exposures To end a multiple exposure before the specified number of exposures have been taken, select [Off] for multiple exposure mode.
HDR Overlay G button U C photo shooting menu Used with high contrast subjects, High Dynamic Range (HDR) preserves details in highlights and shadows by combining two shots taken at different exposures. Use with high-contrast scenes and other subjects to preserve a wide range of details, from highlights to shadows. Option Description • [On (series)]: Take a series of HDR photographs. To end HDR photography, select [HDR mode] again and choose [Off].
Taking HDR Photographs We recommend that you use the matrix metering option when shooting with HDR. 1 Highlight [HDR overlay] in the photo shooting menu and press 2. 2 Select an [HDR mode]. • Highlight [HDR mode] and press 2. • Highlight one of the following options using 1 or 3 and press J. 538 Option Description 0 [On (series)] Take a series of HDR photographs. HDR shooting will continue until you select [Off] for [HDR mode].
• If [On (series)] or [On (single photo)] is selected, an icon will appear in the display. 3 Choose an [HDR strength]. • Highlight [HDR strength] and press 2. • Highlight an option using 1 or 3 and press J. • If [Auto] is selected, the camera will automatically adjust HDR strength to suit the scene.
4 Choose a setting for [Save individual pictures (RAW)]. Choose [ON] to save each of the individual shots used to create the HDR picture; the shots are saved in NEF (RAW) format. 5 Frame the photograph, focus, and shoot. • The camera takes two exposures when the shutter-release button is pressed all the way down. • “Busy” will flash in the control panel while the pictures are combined. No photographs can be taken until recording is complete.
D Cautions: HDR Photography • • • • • • • • The edges of the picture will be cropped out. The desired results may not be achieved if the camera or subject moves during shooting. Use of a tripod is recommended. Depending on the scene, you may notice shadows around bright objects or halos around dark objects. In other cases, the effect produced by HDR may not be particularly noticeable. Uneven shading may be visible with some subjects.
Interval Timer Shooting G button U C photo shooting menu Take photographs at the selected interval until the specified number of shots has been recorded. When using the interval timer, select a release mode other than self-timer or high-speed frame capture. Option Description [Start] Start interval timer shooting. Shooting will begin either after about 3 s ([Now] selected for [Choose start day/ time]) or at a selected date and time ([Choose day/ time]).
Option Description • [ON]: Enable interval priority to ensure that frames shot in modes P and A are taken at the chosen interval. - Flash photography is disabled. - Release priority is enabled regardless of the options selected for Custom Settings a1 [AF-C priority selection] and a2 [AF-S priority selection].
Option Description Combine interval-timer photography with other options. • [AE bracketing]: Perform exposure bracketing during interval-timer photography. • [Time-lapse video]: Use the photos taken during interval-timer photography to create a time-lapse video with an aspect ratio of 16:9. - The camera saves both the photos and the timelapse video. [Options] - Selecting [1:1 (24×24)] for [Image area] > [Choose image area] in the photo shooting menu disables the shutter release.
Interval-Timer Photography D Before Shooting • • Take a test shot at current settings. Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date. • To ensure that shooting is not interrupted, use a fully-charged battery, the supplied charging AC adapter, or an optional AC adapter and power connector. 1 Highlight [Interval timer shooting] in the photo shooting menu and press 2.
2 Adjust interval timer settings. • Choose the start day and time. Highlight [Choose start day/time] and press 2. Highlight an option and press J. - To start shooting immediately, select [Now]. - To start shooting at a chosen date and time, select [Choose day/ time]. Choose the date and time and press J. • Choose the interval between shots. Highlight [Interval] and press 2. 546 C The Photo Shooting Menu: Shooting Options Choose an interval (in hours, minutes, and seconds) and press J.
• Choose the number of shots per interval. Highlight [Intervals×shots/ interval] and press 2. Choose the number of intervals and the number of shots per interval and press J. - In single frame release mode, the photographs for each interval will be taken at the rate for continuous high-speed release mode. • Enable or disable exposure smoothing. Highlight [Exposure smoothing] and press 2 to select [ON] or [OFF]. - Selecting [ON] allows the camera to adjust exposure to match the previous shot.
• Choose an interval priority option. Highlight [Interval priority] and press 2 to select [ON] or [OFF]. • Choose whether the camera focuses between shots. Highlight [Focus before each shot] and press 2 to select [ON] or [OFF]. - If [ON] is selected for [Focus before each shot], the camera will focus before each shot according to the option currently selected for focus mode.
• Choose additional options. Highlight [Options] and press 2. Highlight [AE bracketing] or [Timelapse video] and press J. - If you selected [AE bracketing], choose values for [Number of shots] and [Increment]; if you selected [Time-lapse video], choose settings for [Video file type], [Frame size/frame rate], and [Destination]. • Choose starting folder options. Highlight [Starting storage folder] and press 2. After highlighting the desired options and pressing J to turn them on (M) or off (U), press 4.
3 Highlight [Start] and press J. • If [Now] was selected for [Choose start day/time] in Step 2, shooting will start after about 3 s. • Otherwise shooting will start at the time selected for [Choose start day/time] > [Choose day/time]. • The display turns off during shooting. • Shooting will continue at the selected interval until all shots have been taken. D During Shooting 550 • A 7 icon is displayed in the control panel during interval timer photography.
❚❚ Pausing Interval-Timer Photography Interval-timer photography can be paused between intervals by pressing J or by selecting [Interval timer shooting] in the photo shooting menu, highlighting [Pause], and pressing J. Note that the menus may not be displayed when the G button is pressed if the time selected for [Interval] is very short. • If [Time-lapse video] is selected for [Options], pressing J between intervals will end interval-timer photography.
❚❚ Ending Interval-Timer Photography To end interval-timer photography before all the photos are taken, select [Interval timer shooting] in the photo shooting menu, highlight [Off], and press J. Note that the menus may not be displayed when the G button is pressed if the time selected for [Interval] is very short. In this case you will need to press J to pause interval-timer photography and then select [Interval timer shooting] in the photo shooting menu, highlight [Off], and press J.
D Cautions: Interval-Timer Photography • • • • • • Choose an interval longer than the time needed to take the selected number of shots at the predicted shutter speed. Note that during actual interval-timer photography, the camera must not only take shots at the selected interval but must also have sufficient time to complete the exposures and perform such tasks as processing the photographs.
• If the memory card is full, the interval timer will remain active but no pictures will be taken. Insert another memory card and resume shooting (0 551). • Depending on memory card performance and shooting conditions, shooting may end before the selected number of shots have been taken or the selected number of intervals is complete.
D Interval-Timer Photography: Restrictions Interval-timer photography cannot be combined with some camera features, including: • video recording, • long time-exposures (“Bulb” or “Time”), • the self-timer, • high-speed frame capture, • bracketing, • multiple exposures, • HDR overlay, and • focus shift. D Interval Timer Settings Turning the camera off or selecting a new release mode does not affect interval-timer photography settings.
Time-Lapse Video G button U C photo shooting menu The camera automatically takes photos at selected intervals to create a time-lapse video. Option Description Start time-lapse recording. Shooting starts after about 3 s [Start] and continues at the interval selected for [Interval] for the time selected for [Shooting time]. Choose the interval between shots, in minutes and [Interval] seconds. Choose how long the camera will continue to take [Shooting time] pictures, in hours and minutes.
Option [Frame size/ frame rate] Description Choose the frame size and rate for the final video. The options available vary with the setting chosen for [Video file type]. • [Interval priority] [ON]: Enable interval priority to ensure that frames shot in modes P and A are taken at the chosen interval. - Release priority is enabled regardless of the options selected for Custom Settings a1 [AF-C priority selection] and a2 [AF-S priority selection].
Recording Time-Lapse Videos D Before Shooting • • • Time-lapse videos are shot using the video crop. Take test shots and check the results in the monitor. Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date. • To ensure that shooting is not interrupted, use a fully-charged battery, the supplied charging AC adapter, or an optional AC adapter and power connector.
2 Adjust time-lapse video settings. • Choose the interval between shots. Highlight [Interval] and press 2. Choose an interval (in minutes and seconds) and press J. - Choose an interval longer than the slowest anticipated shutter speed. • Choose the total shooting time. Highlight [Shooting time] and press 2. Choose a shooting time (in hours and minutes) and press J. - The maximum shooting time is 23 hours and 59 minutes.
• Enable or disable exposure smoothing. Highlight [Exposure smoothing] and press 2 to select [ON] or [OFF]. - Selecting [ON] smooths abrupt changes in exposure. • Choose the image area. Highlight [Choose image area] and press 2. Highlight an option and press J. • Choose a video file type. Highlight [Video file type] and press 2. 560 C The Photo Shooting Menu: Shooting Options Highlight an option and press J.
• Choose the frame size and rate. Highlight [Frame size/ frame rate] and press 2. Highlight an option and press J. • Choose an interval priority option. Highlight [Interval priority] and press 2 to select [ON] or [OFF].
• Choose whether the camera focuses between shots. Highlight [Focus before each shot] and press 2 to select [ON] or [OFF]. - If [ON] is selected for [Focus before each shot], the camera will focus before each shot according to the option currently selected for focus mode. • Choose a destination. Highlight [Destination] and press 2. 562 C The Photo Shooting Menu: Shooting Options Highlight the slot that will be used to record time-lapse videos when two memory cards are inserted and press J.
3 Highlight [Start] and press J. • Shooting starts after about 3 s. • The display turns off during shooting. • The camera takes pictures at interval selected for [Interval] for the time selected for [Shooting time] in Step 2. D During Shooting • A 8 icon is displayed in the control panel during shooting. • If the display is turned on by pressing the shutter-release button halfway, the message [Interval timer shooting] will be displayed and the 8 icon will flash.
❚❚ Ending Shooting To end shooting before all the photos are taken, press J or select [Time-lapse video] in the photo shooting menu, highlight [Off], and press J. Note that the menus may not be displayed when the G button is pressed if the time selected for [Interval] is very short. • A video will be created from the frames shot to the point where shooting ended and normal photography will resume.
D Calculating the Length of the Final Video • The total number of frames in the final video can be calculated by dividing the shooting time selected in Step 2 by the interval, rounding up, and adding 1. • The length of the final video can then be calculated by dividing the number of shots by the frame rate selected for [Frame size/frame rate] (for example, a 48-frame video recorded with [1920×1080; 24p] selected for [Frame size/frame rate] will be about two seconds long).
D Cautions: Time-Lapse Videos • • • • • • • • • 566 Sound is not recorded with time-lapse videos. The shutter speed and the time needed to record the picture to the memory card may vary from shot to shot. As a result, camera may be unable to take shots at the selected interval.
D Adjusting Settings Between Shots Shooting and menu settings can be adjusted between shots. Note, however, that the monitor will turn off approximately 2 s before the next shot is taken.
Focus Shift Shooting G button U C photo shooting menu Focus shift automatically varies focus over a series of shots. Use it to take photos that will later be combined using focus stacking to create a single picture with increased depth of field. Before using focus shift, choose a focus mode of AF-S or AF-C and a release mode other than self-timer or high-speed frame capture. Option [Start] [No. of shots] [Focus step width] [Interval until next shot] [First-frame exposure lock] Description Start shooting.
Focus Shift Photography D Before Shooting • • Take a test shot at current settings. To ensure that shooting is not interrupted, use a fully-charged battery, the supplied charging AC adapter, or an optional AC adapter and power connector. 1 Focus. • During focus shift, the camera takes a series of shots starting from a selected focus position and continuing toward infinity. Given that shooting ends when infinity is reached, the starting focus position should be slightly in front of (i.e.
3 Adjust focus shift settings. • Choose the number of shots. Highlight [No. of shots] and press 2. Choose the number of shots and press J. - The maximum number of shots is 300. - We recommend taking more shots than you think you’ll need. You can winnow them down during focus stacking. - More than 100 shots may be required for photographs of insects or other small objects. On the other hand, only a few may be needed to photograph a landscape from front to back with a wide-angle lens.
• Choose the amount the focus distance changes with each shot. Highlight [Focus step width] and press 2. Choose a focus step width and press J. - Press 4 to reduce the focus step width, 2 to increase. - Note that high settings increase the risk that some areas will be out of focus when the shots are stacked. A value of 5 or less is recommended. - Try experimenting with different settings before shooting. • Choose the interval until next shot. Highlight [Interval until next shot] and press 2.
• Enable or disable first-frame exposure lock. Highlight [First-frame exposure lock] and press 2 to select [ON] or [OFF]. - [OFF] is recommended if lighting and other conditions will not change during shooting, [ON] when photographing landscapes and the like under variable lighting. - Selecting [ON] locks exposure at the value for the first shot, ensuring that all photos have the same exposure. Large changes in subject brightness during shooting may however result in apparent variations in exposure.
4 Highlight [Start] and press J. • Shooting starts after about 3 s. • The display turns off during shooting. • The camera takes photographs at the selected interval, starting at the focus distance selected at the start of shooting and progressing out toward infinity by the selected focus step distance with each shot. • Shooting ends when the selected number of shots has been taken or focus reaches infinity.
❚❚ Ending Focus Shift Photography To end shooting before all shots have been taken, either: • select [Focus shift shooting] in the photo shooting menu, highlight [Off], and press J, or • press the shutter-release button halfway or press the J button between shots. D During Shooting A 9 icon is displayed in the control panel during shooting. D Cautions: Focus Shift Photography • • • • • • 574 The shutter speed and the time needed to record the picture may vary from shot to shot.
D Focus Shift Photography: Restrictions Focus-shift photography cannot be combined with some camera features, including: • video recording, • long time-exposures (“Bulb” or “Time”), • the self-timer, • high-speed frame capture, • bracketing, • multiple exposures, • HDR overlay, • interval-timer photography, and • time-lapse video recording.
1 The Video Recording Menu: Video Recording Options To view the video recording menu, select the 1 tab in the camera menus.
D See Also “Video Recording Menu Defaults” (0 468). Shooting Menu Bank G button U 1 video recording menu Select a shooting menu bank (“A” through “D”). More information is available in the section devoted to the [Shooting menu bank] item in the photo shooting menu (0 493). Extended Menu Banks G button U 1 video recording menu Select [ON] to include exposure settings in the information recorded in each of the four shooting menu banks.
File Naming G button U 1 video recording menu Choose the three-letter prefix used in naming the files in which videos are stored; the default prefix is “DSC” (0 502). Destination G button U 1 video recording menu Choose the slot to which videos are recorded when two memory cards are inserted. • The menu shows the time available on each card. • Recording ends automatically when no time remains on the current card. Video File Type G button U 1 video recording menu Choose the video file type.
Frame Size/Frame Rate G button U 1 video recording menu Choose the video frame size (in pixels) and frame rate. For more information, see the section on “Video Frame Size and Rate Options” (0 216) in the “Video Recording” chapter. Image Area G button U 1 video recording menu Choose a video crop. For more information, see the section on “Video Image Area Options” (0 218) in the “Video Recording” chapter.
ISO Sensitivity Settings G button U 1 video recording menu Adjust the following ISO sensitivity settings for use in video mode. Option Description • [Maximum sensitivity] Choose the upper limit for auto ISO sensitivity control from values between ISO 200 and Hi 2.0. • The selected value serves as the upper limit for ISO sensitivity in modes P, S, and A and when [ON] is selected for [Auto ISO control (mode M)] in mode M. • [ON]: Enable auto ISO sensitivity control in mode M.
White Balance G button U 1 video recording menu Choose the white balance for videos. Select [Same as photo settings] to use the option currently selected for photos (0 158). Set Picture Control G button U 1 video recording menu Choose a Picture Control for videos. Select [Same as photo settings] to use the option currently selected for photos (0 192). Manage Picture Control G button U 1 video recording menu Save modified Picture Controls as custom Picture Controls (0 199).
HLG Quality G button U 1 video recording menu Adjust HLG video image processing options for use when [HLG] is chosen as the tone mode for [Video file type] > [H.265 10-bit (MOV)] in the video recording menu. Option [Quick sharp] [Sharpening] [Mid-range sharpening] Control the sharpness of details and outlines. Adjust the sharpness of patterns and lines in the range between [Sharpening] and [Clarity].
Active D-Lighting G button U 1 video recording menu Preserve details in highlights and shadows, creating videos with natural contrast. Option Z P Q R [Off] [Extra high] [High] [Normal] [Low] Description Choose the amount of Active D-Lighting performed from (in order from high to low) [Extra high], [High], [Normal], and [Low]. Active D-Lighting off. High ISO NR G button U 1 video recording menu Reduce “noise” (randomly-spaced bright pixels) in videos recorded at high ISO sensitivities (0 515).
Vignette Control G button U 1 video recording menu Reduce vignetting in videos (0 516). D Vignette Control Changes to [Vignette control] in the photo shooting menu apply in the video recording menu and vice versa. Diffraction Compensation G button U 1 video recording menu Choose whether to reduce diffraction in videos (0 517). D Diffraction Compensation Changes to [Diffraction compensation] in the photo shooting menu apply in the video recording menu and vice versa.
Video Flicker Reduction G button U 1 video recording menu Reduce flicker and banding when shooting under fluorescent or mercury-vapor lighting during video recording. Choose [Auto] to allow the camera to automatically choose the correct frequency. If [Auto] fails to produce the desired results, select [50 Hz] or [60 Hz] according to the frequency of the local power supply. Choose [50 Hz] for areas with a 50 Hz power supply, [60 Hz] for areas with a 60 Hz power supply.
Metering G button U 1 video recording menu Choose how the camera meters exposure in video mode. [Spot metering] is not available in the video recording menu (0 520). Focus Mode G button U 1 video recording menu Choose a focus mode for video recording (0 110). AF-Area Mode G button U 1 video recording menu Choose an AF-area mode for video recording (0 113).
AF Subject Detection Options G button U 1 video recording menu Subject Detection Choose the type of subject to which the camera gives priority when focusing in video mode (0 119). AF When Subject Not Detected Choose whether the camera focuses if unable to detect a subject of the type selected for [Subject detection] when [Full-time AF] is selected for focus mode. • If [ON] is selected, the camera will initiate autofocus whether or not a subject of the selected type is detected.
Microphone Sensitivity G button U 1 video recording menu Turn built-in or external microphones on or off or adjust microphone sensitivity. Option [Auto] [Manual] [Microphone off] Description Microphone sensitivity is adjusted automatically. Adjust microphone sensitivity manually. Choose from values of from [1] to [20]. The higher the value, the higher the sensitivity; the lower the value, the lower the sensitivity. Turn sound recording off.
Attenuator G button U 1 video recording menu Select [ON] to reduce microphone gain and prevent audio distortion when recording videos in loud environments. Frequency Response G button U 1 video recording menu Choose the range of frequencies to which built-in and external microphones respond. Option Description Record a wide range of frequencies. Choose for S [Wide range] everything from music to the bustling hum of a city street. T [Vocal range] Choose for human voices.
Mic Jack Plug-in Power G button U 1 video recording menu The camera does not provide power to external microphones when [OFF] is selected. • To prevent noise from interference generated by the power supply, we recommend turning plug-in power [OFF] when using microphones that do not require plug-in power. • For information on whether your microphone requires plug-in power, consult the manufacturer. Headphone Volume G button U 1 video recording menu Press 1 or 3 to adjust headphone volume.
Timecode G button U 1 video recording menu Choose whether to record time codes giving the hour, minute, second, and frame number for each frame when shooting videos. Time codes are available only with videos recorded in MOV format. Option Description • • [Record timecodes] • • [Count-up method] • [On]: Record time codes. The time code appears in the shooting display.
Option Description • • [Timecode origin] [Reset]: Reset the time code to 00:00:00.00. [Enter manually]: Enter the hour, minute, second, and frame number manually. • [Current time]: Set the time code to the current time as reported by the camera clock. Before proceeding, select [Time zone and date] in the setup menu and make sure that the camera clock is set to the correct time and date.
A Custom Settings: Fine-Tuning Camera Settings To view Custom Settings, select the A tab in the camera menus. Custom Settings are used to customize camera settings to suit individual preferences. The Custom Settings menu is divided into two levels.
The following Custom Settings are available: 1 Item 0 [Custom Settings bank] Item b [Metering/exposure] a [Focus] a1 [AF-C priority selection] 598 b1 a2 b2 a3 a4 a5 a6 a7 a8 a9 [AF-S priority selection] 599 [Focus tracking with 600 lock-on] [Focus points used] [Store points by orientation] [AF activation] [Focus point persistence] [Limit AF-area mode selection] [Focus mode restrictions] [Focus point wrapa10 around] a11 [Focus point display] [Built-in AF-assist a12 illuminator] a13 [Focus peaking] [M
Item d [Shooting/display] [Continuous shooting d1 speed] [Maximum shots per d2 burst] d3 d4 d5 [Limit release mode selection] [Sync.
Item f [Controls] f1 [Customize i menu] f2 f3 f4 f5 f6 f7 f8 f9 [Custom controls (shooting)] [Custom controls (playback)] [Control lock] [Reverse dial rotation] [Release button to use dial] [Reverse indicators] 0 644 647 659 665 666 666 667 [Reverse ring for focus] 667 [Focus ring rotation 668 range] f10 [Control ring response] 669 [Full-frame playback f11 670 flicks] Item 672 g2 [Custom controls] 674 g3 [Control lock] [Limit AF-area mode selection] 682 g4 683 g6 [Focus mode restrictions] [A
Custom Settings Bank G button U A Custom Settings menu Custom Settings are stored in one of four banks (banks “A” through “D”) that can be selected using [Custom Settings bank]. Changes to settings made while one bank is selected are not applied to the remaining banks. Renaming Custom Settings Banks A descriptive caption can be added to the bank name (“A”, “B”, “C”, or “D”) by highlighting the bank, pressing 2, and selecting [Rename]. Captions can be up to 20 characters long.
a: Focus a1: AF-C Priority Selection G button U A Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-C is selected. G B Option Description [Release] Photos can be taken whenever the shutter-release button is pressed (release priority). [Focus + release] F [Focus] 598 Priority is normally given to release, but if the subject is dark or low contrast and the camera is in continuous-release mode, priority will be given to focus for the first shot in each series.
a2: AF-S Priority Selection G button U A Custom Settings menu Choose whether photos can be taken before the camera focuses when AF-S is selected. G Option Description [Release] Photos can be taken whenever the shutter-release button is pressed (release priority). F [Focus] Photos can be taken only when the camera is in focus (focus priority).
a3: Focus Tracking with Lock-On G button U A Custom Settings menu Choose how quickly focus responds if something passes between the subject and the camera when AF-C is selected for the focus mode. Blocked Shot AF Response • Choose [5] (Delayed) to help maintain focus on your original subject. • Choose [1] (Quick) to make it easier to shift focus to objects crossing your field of view.
a4: Focus Points Used G button U A Custom Settings menu Choose the number of focus points available for manual focus-point selection when an option other than [Auto-area AF] is selected for AFarea mode. Option 4 5 [All points] [Alternating points] Description Every focus point available in the current AF-area mode can be selected. The number of points available varies with the AF-area mode.
a5: Store Points by Orientation G button U A Custom Settings menu Choose whether separate focus points can be selected for “wide” (landscape) orientation, for “tall” (portrait) orientation with the camera rotated 90° clockwise, and for “tall” orientation with the camera rotated 90° counterclockwise. • Select [Off] to use the same focus point regardless of camera orientation.
• Select [Focus point] to enable separate focus-point selection. To enable separate selection of both the focus point and AF-area mode, choose [Focus point and AF-area mode].
a6: AF Activation G button U A Custom Settings menu Choose whether the shutter-release button can be used to focus. Option Description [Shutter/ AF-ON] [AF-ON only] The camera focuses when the shutter-release button is pressed halfway. The camera does not focus when the shutter-release button is pressed halfway. • Highlighting [AF-ON only] and pressing 2 displays [Out-of-focus release] options.
a7: Focus Point Persistence G button U A Custom Settings menu Choose whether the focus point selected by the camera continues in use after you change AF-area modes using a control to which [AF-area mode] or [AF-area mode + AF-ON] has been assigned via Custom Setting f2 [Custom controls (shooting)]. This only applies if you change AF-area modes while focusing with the shutter-release button pressed halfway.
a8: Limit AF-Area Mode Selection G button U A Custom Settings menu Choose the AF-area modes that can be selected by pressing the focusmode button and rotating the sub-command dial. • Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the sub-command dial. • To complete the operation, press G. a9: Focus Mode Restrictions G button U A Custom Settings menu Limit focus-mode selection to a single focus mode.
a11: Focus Point Display G button U A Custom Settings menu Choose from the focus point display options below. Manual Focus Mode Option [ON] Description The focus point is displayed at all times in manual focus mode. [OFF] The focus point is displayed only during focus point selection. Dynamic-Area AF Assist Choose whether both the selected focus point and the surrounding focus points are displayed in dynamic-area AF mode.
AF-C In-Focus Display Choose whether the focus point changes color when the subject is in focus in focus mode AF-C. Option [ON] [OFF] 608 Description The focus point is displayed in green when the camera judges that the subject is in focus. The active focus point is displayed in red or yellow at all times, whether or not the camera is in focus.
a12: Built-in AF-Assist Illuminator G button U A Custom Settings menu Choose whether the built-in AF-assist illuminator lights to assist the focus operation in photo mode when lighting is poor. Option Description [ON] In photo mode, the illuminator will light as required when AFS is selected for focus mode. [OFF] The illuminator does not light to assist the focus operation. The camera may not be able to focus when lighting is poor.
a13: Focus Peaking G button U A Custom Settings menu When focus peaking is enabled in manual focus mode, objects that are in focus are indicated by colored outlines in the display. You can choose the color. Focus Peaking Display Select [ON] to enable focus peaking. Focus Peaking Sensitivity Choose focus peaking sensitivity from [3 (high sensitivity)], [2 (standard)], and [1 (low sensitivity)]. The higher the value, the greater the depth that will be shown as being in focus.
a14: Manual Focus Ring in AF Mode G button U A Custom Settings menu This item is available with compatible lenses only. It controls whether the lens focus ring can be used for manual focus in autofocus mode. Option [ON] [OFF] Description Autofocus can be over-ridden by rotating the lens focus ring (autofocus with manual override). The focus ring can be used for manual focus while the shutter-release button is pressed halfway.
b: Metering/Exposure b1: ISO sensitivity Step Value G button U A Custom Settings menu Choose whether changes to ISO sensitivity are made in increments of 1/3 or 1 EV. If the value currently selected for ISO sensitivity is not available at the chosen setting, ISO sensitivity will be set to the nearest available value. b2: EV Steps for Exposure Cntrl G button U A Custom Settings menu Select the increments used for adjustments to shutter speed, aperture, bracketing, and exposure and flash compensation.
b3: Easy Exposure Compensation G button U A Custom Settings menu Choose whether the E button is needed for exposure compensation. Option Description [On (Auto reset)] Exposure compensation can be adjusted using only a command dial. The setting selected with the command dial is reset when the camera turns off or the standby timer expires. [On] Exposure compensation can be adjusted using only a command dial. Exposure compensation is not reset when the camera turns off or the standby timer expires.
b5: Center-Weighted Area G button U A Custom Settings menu When [Center-weighted metering] is selected, the camera assigns the greatest weight to an area in the center of the shooting display when setting exposure. Option R [Small] S [Standard] T 614 [Average] Description The camera assigns the greatest weight to an area equivalent to a circle 8 mm in diameter. The camera assigns the greatest weight to an area equivalent to a circle 12 mm in diameter.
b6: Fine-Tune Optimal Exposure G button U A Custom Settings menu Use this option to fine-tune the exposure value selected by the camera; exposure can be fine-tuned separately for each metering method. Exposure can be adjusted up for brighter exposures or down for darker exposures in the range +1 to –1 EV in steps of 1/ EV. The default is zero. 6 D Fine-Tuning Exposure • Custom Setting b6 [Fine-tune optimal exposure] fine-tunes exposure separately for each Custom Settings bank.
b7: Keep Exp. When f/ Changes G button U A Custom Settings menu When [OFF] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu in mode M, actions such as switching to a lens with a different aperture range may cause unintended changes to aperture. If an option other than [Exposure maintenance off] is selected for [Keep exp. when f/ changes], the camera will adjust shutter speed or ISO sensitivity to maintain exposure at its current value.
c: Timers/AE Lock c1: Shutter-Release Button AE-L G button U A Custom Settings menu Choose whether exposure locks when the shutter-release button is pressed. Option Description O [On (half press)] P [On (burst mode)] [Off] Pressing the shutter-release button halfway locks exposure. Exposure only locks while the shutter-release button is pressed all the way down. Pressing the shutter-release button does not lock exposure.
c3: Power Off Delay G button U A Custom Settings menu Choose how long the monitor or viewfinder remains on when no operations are performed. • Different settings can be chosen for [Playback], [Menus], [Picture review], and [Standby timer]. • [Standby timer] determines how long the control panel and the monitor or viewfinder display remain on after the shutter-release button is pressed halfway. The monitor and viewfinder dim a few seconds before the standby timer expires.
d: Shooting/Display d1: Continuous Shooting Speed G button U A Custom Settings menu Choose the frame advance rate for continuous high-speed and continuous low-speed modes. Option Description [Continuous high-speed] Choose the frame rate for continuous high-speed release mode from options ranging from [20 fps] to [10 fps]. [Continuous low-speed] Choose the frame rate for continuous low-speed release mode from options ranging from [10 fps] to [1 fps].
d3: Limit Release Mode Selection G button U A Custom Settings menu Choose the release modes that can be accessed by pressing the c button and rotating the main command dial when the release mode dial is rotated to c. • Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the main command dial. • To complete the operation, press G. d4: Sync.
d5: Extended Shutter Speeds (M) G button U A Custom Settings menu Extend the range of shutter speeds available in mode M; the slowest shutter speed available when [ON] is selected is 900 s (15 minutes). Extended shutter speeds can be used for pictures of the night sky and other long exposures. • At speeds slower than 1 s, the shutter speed displayed by the camera may differ from the actual exposure time.
d7: File Number Sequence G button U A Custom Settings menu Choose a file numbering option. Option [On] [Off] [Reset] 622 Description When a new folder is created or a new memory card is inserted in the camera, file numbering will continue from the last number used. This simplifies file management by minimizing the occurrence of duplicate file names when multiple cards are used. When a new folder is created or a new memory card is inserted, file numbering restarts from 0001.
D File Number Sequence • If a picture is taken when the current folder contains a picture numbered 9999, a new folder will be created and file numbering will restart from 0001.
d8: View Mode (Photo Lv) G button U A Custom Settings menu Choose whether the camera adjusts the preview in the viewfinder or monitor to reflect how shooting settings will affect the hue and brightness of the final picture. Regardless of the option selected, the effects of camera settings are always visible in video mode.
Option Description The effects of changes to settings such as white balance, Picture Controls, and exposure compensation are not visible in the shooting display. Pressing 2 when [Adjust for ease of viewing] is highlighted displays [Auto] and [Custom] options. • [Auto]: Color, brightness, and other settings are adjusted for ease of viewing during prolonged periods of use. • [Custom]: Press 2 to make individual adjustments to [White balance], [Set Picture Control], and [Adjust for [Brighten shadows].
d9: Starlight View (Photo Lv) G button U A Custom Settings menu Select [ON] to brighten the display for ease of viewing in dark environments (starlight view). Note that the display may become slightly jerky when starlight view is in effect. d10: Warm Display Colors G button U A Custom Settings menu Use warmer colors with reduced brightness in the shooting, menu, and/ or playback displays.
d11: LCD Illumination G button U A Custom Settings menu Choose when the control panel and button backlights light. • If [OFF] is selected, the backlights will light when the power switch is rotated to D. The backlights turn off when the shutter-release button is pressed. • If [ON] is selected, the backlights will light while the standby timer is active. Note that this increases the drain on the battery.
A Button Backlights The following are equipped with backlights: 1 2 3 5 6 4 1 2 3 4 5 6 7 8 628 c button BKT button c button I button g (Fn4) button O (Q) button X button i button 78 9 151413 12 11 10 9 10 11 12 13 14 15 A Custom Settings: Fine-Tuning Camera Settings G button K button W (Q) button i button for vertical shooting U button T button b button
d12: View All in Continuous Mode G button U A Custom Settings menu If [OFF] is selected, the display will go blank during burst photography. d13: Release Timing Indicator G button U A Custom Settings menu Choose how the display responds when the shutter is released. Option [Type A] [Type B] [Type C] [Off] Description The display goes dark when the shutter is released. Borders appear at the top, bottom, and sides of the frame when the shutter is released.
d14: Image Frame G button U A Custom Settings menu Select [OFF] to hide the white border around the shooting displays in the monitor and viewfinder. d15: Grid Type G button U A Custom Settings menu Choose a framing grid for the shooting display. The selected grid can be displayed by placing a check (M) next to b in the list for Custom Setting d17 [Custom monitor shooting display] (0 634) or d18 [Custom viewfinder shooting display] (0 636).
d16: Virtual Horizon Type G button U A Custom Settings menu Choose a virtual horizon for the shooting display. The selected virtual horizon can be displayed by placing a check (M) next to D in the list for Custom Setting d17 [Custom monitor shooting display] (0 634) or d18 [Custom viewfinder shooting display] (0 636). • [Type A]: A large indicator showing roll and pitch fills the display. • [Type B]: A roll indicator appears at the bottom of the display and a pitch indicator at its right edge.
Roll Camera rotated clockwise Option [Type A] [Type B] 632 A Custom Settings: Fine-Tuning Camera Settings Camera rotated counterclockwise
Pitch Camera tilted forward Camera tilted back Option [Type A] [Type B] D The Virtual Horizon Display Note that the display may not be accurate when the camera is tilted at a sharp angle forward or back. The camera will not display pitch and roll indicators when held at angles at which tilt cannot be measured.
d17: Custom Monitor Shooting Display G button U A Custom Settings menu Choose the monitor displays accessible by pressing the DISP button during shooting. • Highlight items ([Display 2] through [Display 5]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected.
• To choose indicators that appear in displays [Display 1] through [Display 4], highlight the corresponding option and press 2. You can then highlight items and press J to select (M) or deselect (U). Option [Basic A shooting info] [Detailed B shooting info] [Touch C controls] D E b F Description View the shooting mode, shutter speed, aperture, and other basic shooting info. View the focus mode, AF-area mode, white balance, and other detailed shooting info.
d18: Custom Viewfinder Shooting Display G button U A Custom Settings menu Choose the viewfinder displays accessible by pressing the DISP button during shooting. • Highlight items ([Display 2] through [Display 4]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected.
e: Bracketing/Flash e1: Flash Sync Speed G button U A Custom Settings menu Choose the flash sync speed. Option [1/250 s (Auto FP)] [1/200 s (Auto FP)] Description Flash sync speed is set to 1/250 or 1/200 s. With compatible flash units, auto FP high-speed sync will automatically be enabled at shutter speeds faster than 1/250 or 1/200 s. • In modes P and A, auto FP high-speed sync will be activated if the actual shutter speed is faster than 1/250 or 1/200 s.
D Auto FP High-Speed Sync Depending on the shutter speed, horizontal lines may appear in pictures taken using auto FP high-speed sync when [1/250 s (Auto FP)] or [1/200 s (Auto FP)] is selected. This effect can be mitigated by: • choosing a slower shutter speed or • adjusting flash output. A Auto FP High-Speed Sync Auto FP high-speed sync allows the flash to be used at shutter speeds as fast as 1/8000 s.
e2: Flash Shutter Speed G button U A Custom Settings menu Choose the slowest shutter speed available with a flash in mode P or A. Regardless of the setting chosen for Custom Setting e2 [Flash shutter speed], shutter speeds can be as slow as 30 s in modes S and M or at flash settings of slow sync, slow rear-curtain sync, or red-eye reduction with slow sync. e3: Exposure Comp. for Flash G button U A Custom Settings menu Choose how the camera adjusts flash level when exposure compensation is used.
e4: Auto c ISO Sensitivity Control G button U A Custom Settings menu Choose how the camera adjusts flash level when auto ISO sensitivity control is enabled. Option Description e [Subject and background] The camera takes both the main subject and background lighting into account when adjusting ISO sensitivity. f [Subject only] ISO sensitivity is adjusted only to ensure that the main subject is correctly exposed.
e6: Auto Bracketing (Mode M) G button U A Custom Settings menu The settings affected when bracketing is enabled in mode M and [OFF] is selected for [ISO sensitivity settings] > [Auto ISO sensitivity control] in the photo shooting menu are determined by the options selected for [Auto bracketing] > [Auto bracketing set] in the photo shooting menu and the option chosen for Custom Setting e6 [Auto bracketing (mode M)].
e7: Bracketing Order G button U A Custom Settings menu Choose the order in which the shots in the bracketing program are taken. Option H Description The unmodified shot is taken first, followed [MTR > under > over] by the shot with the lowest value, followed by the shot with the highest value. I [Under > MTR > over] Shooting proceeds in order from the lowest to the highest value.
e8: Flash Burst Priority G button U A Custom Settings menu Choose whether optional flash units emit monitor pre-flashes before each shot during burst photography in high- or low-speed continuous release mode. Option c q Description The flash unit emits a monitor pre-flash before the first shot in each sequence and locks output at the [Prioritize metered value for the remaining shots. The frame frame advance rate drops less than when [Prioritize advance rate] precise flash control] is selected.
f: Controls f1: Customize i Menu G button U A Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in photo mode. • Highlight a position in the i menu, press J, and select the desired item. • The following items can be assigned to the i menu.
Option s [Focus mode] [AF-area mode/subj.
Split-Screen Display Zoom If [Split-screen display zoom] is assigned to the i menu, you can select [Split-screen display zoom] to simultaneously zoom in on two areas that are aligned horizontally but are in different parts of the frame (split-screen display zoom). The locations of the areas are indicated by the two frames (r) in the navigation window in the bottom right corner of the display.
f2: Custom Controls (Shooting) G button U A Custom Settings menu Choose the operations performed in photo mode using camera or lens controls, including the camera buttons and sub-selector and the lens control ring. • Choose the roles played by the controls below. Highlight the desired control and press J.
• The roles that can be assigned are listed below. The roles available vary with the control. Role 648 Description A [Preset focus point] Pressing the control selects a preset focus point. • To choose the point, highlight it, hold the control, and press the focus-mode button until the focus point flashes.
Role d Description Holding the control selects a preset AF-area mode. The AF-area mode previously in effect is restored [AF-area mode] when the control is released. • To choose the AF-area mode, press 2 when [AF-area mode] is highlighted. Holding the control selects a preset AF-area mode and initiates autofocus. The AF-area mode [AF-area previously in effect is restored when the control is 5 mode + AF-ON] released. • To choose the AF-area mode, press 2 when [AF-area mode + AF-ON] is highlighted.
Role O [AE/AWB lock (hold)] [AE lock (Reset D on release)] 650 C [AE lock only] B [AE/AF lock] r [FV lock] h [c Disable/ enable] q [Preview] Description Exposure locks when the control is pressed. White balance will also lock provided [Auto] or [Natural light auto] is selected for white balance. Exposure and white-balance lock do not end when the shutter is released. The lock will however be released when the control is pressed a second time or the standby timer expires.
o Role Description [Recall shooting functions] Hold the control to recall previously-selected settings. • To choose the settings recalled, press 2 when [Recall shooting functions] is highlighted. - Highlight items using 1 or 3 and press J to select (M) or deselect (U). Only items marked with a check (M) will be recalled while the button is pressed. - Highlight items using 1 or 3 and press 2 to view options. Press J to save changes and exit.
Role Description • 1 652 [Bracketing burst] If the control is pressed when an option other than [WB bracketing] is selected for [Auto bracketing] > [Auto bracketing set] in the photo shooting menu in continuous release mode, the camera will take all the shots in the current bracketing program and repeat the bracketing burst while the shutter-release button is pressed. In single-frame release mode, shooting will end after the first bracketing burst.
Role c [Sync. release selection] Description When [Synchronized release] is selected for [Connect to other cameras] in the network menu, or when a wireless remote controller is used for synchronized release, the chosen control can be used to toggle between remote release and master or synchronized release. The options available depend on the setting chosen for Custom Setting d4 [Sync. release mode options]. • The following options are available when [Sync] is selected for [Sync.
Role Description • 4 [+ RAW] 654 L [Silent mode] b [Live view info display off] b [Framing grid] p [Zoom on/off] If a JPEG option is currently selected for image quality, “RAW” will appear in the shooting display and an NEF (RAW) copy will be recorded with the next picture taken after the control is pressed. The original image quality setting will be restored when you remove your finger from the shutter-release button or press the control again, canceling [+ RAW].
Role Description D [Virtual horizon] Press the control to enable the virtual horizon display. Press again to hide the display. The display type can be selected using Custom Setting d16 [Virtual horizon type]. k [Starlight view (photo Lv)] Press the control to toggle starlight view on. Press again to end starlight view. W Press the control once to enable focus peaking [Focus peaking when MF is selected for focus mode. Press again display] to end focus peaking.
Role Description Press the control and rotate the main command [Image quality/ dial to choose an image quality option and the 8 size] sub-command dial to select image size. h [Set Picture Control] Press the control and rotate a command dial to choose a Picture Control. y [Active D-Lighting] Press the control and rotate a command dial to adjust Active D-Lighting. Press the control and rotate a command dial to choose a metering option.
Role v [1 step spd/ aperture] [Choose nonw CPU lens number] X [Focus (M/A)] q [Aperture] Description Make adjustments to shutter speed and aperture in increments of 1 EV, regardless of the option selected for Custom Setting b2 [EV steps for exposure cntrl]. • In modes S and M, shutter speed can be adjusted in increments of 1 EV by holding the control and rotating the main command dial.
Role Description • E Assigning this function to the Fn button for vertical shooting allows exposure compensation to be adjusted by holding the button and [Exposure rotating a command dial. compensation] • Assigning this function to the lens control ring allows exposure compensation to be adjusted by rotating the ring. 9 [ISO sensitivity] [None] Rotate the lens control ring to adjust ISO sensitivity. The control has no effect. Command Dials The following roles can be assigned to the command dials.
f3: Custom Controls (Playback) G button U A Custom Settings menu Choose the operations performed during playback using the cameras controls listed below. • Choose the roles played by the controls below. Highlight the desired control and press J.
• The roles that can be assigned to these controls are listed below. The roles available vary with the control. Role g [Protect] p l b 660 [Zoom on/off] [Filtered playback] [Voice memo] Description Press the control to toggle protection for the current picture on or off. Press the control to zoom the display in on the area around the current focus point (the zoom ratio is selected in advance). Press again to cancel zoom. • To choose the zoom ratio, highlight [Zoom on/ off] and press 2.
Role [Select for K upload to computer] N c [Select for upload (FTP)] [Rating] Description Press the control to upload the current picture to a computer or FTP server with which the camera is currently connected. • To view upload options, highlight [Select for upload to computer] or [Select for upload (FTP)] and press 2. Highlight options and press J to select (M) or deselect (U).
Role n o [View histograms] u [Choose slot and folder] [C/D switched] [C/D unswitched] [None] 662 Description [Thumbnail on/ Press the control to toggle between full-frame and off] 4-, 9-, or 72-frame thumbnail playback. A histogram is displayed while the control is pressed. The histogram display is available in both full-frame and thumbnail playback. Press the control to display the [Choose slot and folder] dialog, where you can then choose a slot and folder for playback.
Command Dials The following roles can be assigned to the command dials. To view options, highlight items and press 2. ❚❚ Frame Advance Choose the number of frames that can be skipped by rotating the command dials during full-frame playback. Option [1 frame] Description Skip forward or back 1 frame at a time. [10 frames] [50 frames] Skip forward or back 10 frames at a time. Skip forward or back 50 frames at a time.
❚❚ Video Playback Choose the roles played by the command dials during video playback. Option [1 frame] 664 Description Advance or rewind a frame at a time. [5 frames] Advance or rewind 5 frames at a time. [10 frames] [2 s] Advance or rewind 10 frames at a time. Skip forward or back 2 s at a time. [5 s] [10 s] Skip forward or back 5 s at a time. Skip forward or back 10 s at a time. [First/last frame] Skip to the first or last frame.
f4: Control Lock G button U A Custom Settings menu Lock exposure settings or focus-point selection. Option Description Select [ON] to lock shutter speed at its current value in modes S and M. [Shutter speed lock] • O icons appear in the shooting display and control panel when shutter-speed lock is in effect. Select [ON] to lock aperture at its current value in modes A and M. [Aperture lock] • O icons appear in the shooting display and control panel when aperture lock is in effect.
f5: Reverse Dial Rotation G button U A Custom Settings menu Reverse the direction of rotation of the command dials for selected operations. • Highlight [Exposure compensation] or [Shutter speed/aperture] and press 2 to select (M) or deselect (U). • Press G to save changes and exit. • The changes also apply to the command dial for vertical shooting.
f7: Reverse Indicators G button U A Custom Settings menu Choose whether the exposure indicator is displayed with negative values on the left and positive values on the right, or with positive values on the left and negative values on the right. Option V W Description The indicator is displayed with positive values on the left and negative values on the right. The indicator is displayed with negative values on the left and positive values on the right.
f9: Focus Ring Rotation Range G button U A Custom Settings menu Choose how far the focus or control rings on Z mount lenses must be rotated to go all the way from the minimum focus distance to infinity. Option [Non-linear] Description The focus distance changes by a large amount when the ring is rotated rapidly and by a small amount when the ring is rotated slowly, without regard to how far the ring is rotated.
f10: Control Ring Response G button U A Custom Settings menu Choose how responsive the lens control ring is when assigned the [Aperture], [Power aperture], [Exposure compensation], or [ISO sensitivity] using Custom Setting f2 [Custom controls (shooting)] or g2 [Custom controls].
f11: Full-Frame Playback Flicks G button U A Custom Settings menu Choose the role assigned to the flick up and down or flick left and right gestures during full-frame playback. Flick Up/Flick Down Choose the operation performed by flicking up or down. Option c [Rating] [Select for K upload to computer] [Select for N upload (FTP)] g [Protect] Description Assign the current picture a pre-selected rating. The rating can be chosen by pressing 2. Mark the current picture for priority upload to a computer.
Flick Advance Direction Choose the gesture used for frame advance. Option Description [Left ← S Right] Flick from right to left to view the next picture. [Left → Right] Flick from left to right to view the next picture.
g: Video g1: Customize i Menu G button U A Custom Settings menu Choose the items listed in the i menu displayed when the i button is pressed in video mode. • Highlight a position in the i menu, press J, and select the desired item. • The following items can be assigned to the i menu.
Option 9 3 u 8 [Zebra pattern] [Monitor/viewfinder brightness] [Airplane mode] [Multi-selector power aperture] 0 686 709, 711 756 9 Option 0 [Multi selector exposure comp.] 673 v [Warm display colors] 626 673 Multi-Selector Power Aperture Choose whether the multi selector can be used for power aperture. When [Enable] is selected, holding 1 widens the aperture. Holding 3 narrows the aperture. Multi Selector Exposure Comp.
g2: Custom Controls G button U A Custom Settings menu Choose the operations performed in video mode using camera or lens controls, including the camera buttons and sub-selector and the lens control ring. • Choose the roles played by the controls below. Highlight the desired control and press J.
• The roles that can be assigned are listed below. The roles available vary with the control. Role L [Silent mode] b [Live view info display off] b [Framing grid] A [AF-ON] F Description Press the control to enable silent mode. Press again to disable. Press the control to hide icons and other information in the shooting display. Press again to view. Press the control to display a framing grid. To hide the grid, press the control again.
N 676 Role Description [AWB lock (hold)] If [Auto] or [Natural light auto] is selected for white balance, white balance will lock when the control is pressed (white-balance lock). Whitebalance lock does not end when recording begins. The lock will however be released when the control is pressed a second time or the standby timer expires. O [AE/AWB lock (hold)] C [AE lock only] B [AE/AF lock] p [Zoom on/off] D [Virtual horizon] Exposure locks when the control is pressed.
Role Description Press the control once to enable focus peaking [Focus peaking when MF is selected for focus mode. Press again W display] to end focus peaking. O [MY MENU] [Access top 3 item in MY MENU] K [Playback] Press the control to display “MY MENU”. Press the control to jump to the top item in “MY MENU”. Select this option for quick access to a frequently-used menu item. Press the control to start playback.
Role 9 A 678 Description [Pattern tone range] Press the control to cycle through zebra pattern tone range options. [Preset focus point] Pressing the control selects a preset focus point. • To choose the point, highlight it, hold the control, and press the focus-mode button until the focus point flashes. • The behavior of the selected control can be chosen by pressing 2 when [Preset focus point] is highlighted. - [Press to recall focus point]: Pressing the control recalls the preset focus point.
Role [Select center K focus point] Description Pressing the control selects the center focus point. [Same as AF-ON The control performs the role currently selected button] for the AF-ON button. Press the control to start recording. Press again to 1 [Record videos] end recording. [Shooting Press the control and rotate the main command v mode] dial to choose a shooting mode.
Role Description • a [Control lock] H [Microphone sensitivity] X [Focus (M/A)] q [Power aperture] Press the control and rotate the main command dial to lock shutter speed (mode M). To lock aperture (modes A and M), press the control and rotate the sub-command dial. • To lock focus-point selection, hold the control and press 1, 3, 4, or 2. Press the control and rotate a command dial to adjust microphone sensitivity.
D Power Aperture • • Power aperture is available only in modes A and M. The display may flicker while aperture is adjusted. Command Dials The following roles can be assigned to the command dials. To view options, highlight items and press 2. Role [Exposure setting] Description Reverse the roles of the main and sub-command dials in selected modes. Press 4 or 2 to highlight a mode and 1 or 3 to switch roles.
g3: Control Lock G button U A Custom Settings menu Lock exposure settings or focus-point selection. Option Description Select [ON] to lock shutter speed at its current value in mode M. [Shutter speed lock] • O icons appear in the shooting display and control panel when shutter-speed lock is in effect. Select [ON] to lock aperture at its current value in modes A and M. [Aperture lock] • O icons appear in the shooting display and control panel when aperture lock is in effect.
g4: Limit AF-Area Mode Selection G button U A Custom Settings menu Choose the AF-area modes that can be selected by pressing the focusmode button and rotating the sub-command dial. • Highlight options and press J or 2 to select (M) or deselect (U). Modes marked with a check (M) are available for selection via the sub-command dial. • To complete the operation, press G. g5: Focus Mode Restrictions G button U A Custom Settings menu Limit focus-mode selection to a single focus mode.
g6: AF Speed G button U A Custom Settings menu Choose the focus speed for video mode. Use [When to apply] to choose when the selected option applies. Option D [Always] E [Only while recording] Description The camera focuses at the selected speed at all times in video mode. Focus is adjusted at the selected speed only while video recording is in progress. At other times, the camera focuses as quickly as possible.
g7: AF Tracking Sensitivity G button U A Custom Settings menu The AF tracking sensitivity for video mode can be set to values of from 1 to 7. • Choose [7] (Low) to help maintain focus on your original subject. • If the subject leaves the selected focus area when [1] (High) is selected, the camera will respond by quickly shifting focus to a new subject in the same area.
g9: Zebra Pattern G button U A Custom Settings menu Choose whether a zebra pattern is used to indicate selected tone ranges in video mode. Pattern Tone Range Choose the tone range shown by the zebra pattern from [Highlights] or [Mid-tones], or select [Zebra pattern off] to turn the zebra pattern off. Highlights and mid-tones can be defined using [Highlight threshold] and [Mid-tone range], respectively. Pattern To enable the zebra display, select [Pattern 1] or [Pattern 2].
Mid-tone Range Choose the brightness needed to trigger the zebra display when [Mid-tones] is selected for [Pattern tone range]. • The mid-tone range is defined as a brightness [Value] and [Range] of brightnesses centered around the selected value. • Press 4 or 2 to highlight items and press 1 or 3 to change. D Zebra Pattern If both the zebra display and focus peaking are enabled in manual focus mode, only focus peaking will take effect.
g10: Limit Zebra Pattern Tone Range G button U A Custom Settings menu Choose the tone range shown by a zebra pattern when a control previously assigned [Pattern tone range] is pressed. If [Highlights] or [Mid-tones] is selected, pressing the control will display a zebra pattern only over areas in the selected tone range; pressing the button a second time hides the zebra pattern. g11: Grid Type G button U A Custom Settings menu Choose a framing grid for video mode.
g12: Custom Monitor Shooting Display G button U A Custom Settings menu Choose the monitor displays accessible by pressing the DISP button in video mode. • Highlight items ([Display 2] through [Display 4]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected.
• To choose indicators that appear in displays [Display 1] through [Display 4], highlight the corresponding option and press 2. You can then highlight items and press J to select (M) or deselect (U). Option [Basic A shooting info] [Detailed B shooting info] [Touch C controls] D E b F [Virtual horizon] Description View the shooting mode, shutter speed, aperture, and other basic shooting info. View the focus mode, AF-area mode, white balance, and other detailed shooting info.
g13: Custom Viewfinder Shooting Display G button U A Custom Settings menu Choose the viewfinder displays accessible by pressing the DISP button in video mode. • Highlight items ([Display 2] or [Display 3]) and press J to select (M) or deselect (U). Only displays marked with a check (M) can be accessed by pressing the DISP button during shooting. [Display 1] cannot be deselected. • To choose indicators that appear in displays [Display 1] through [Display 3], highlight the corresponding option and press 2.
D The Playback Menu: Managing Pictures To display the playback menu, select the D (playback menu) tab in the camera menus.
Delete G button U D playback menu Delete multiple pictures. For more information, see “Deleting Multiple Pictures” (0 260). Option Q [Selected pictures] [Candidates for d deletion] [Pictures shot on i selected dates] R [All pictures] Description Delete selected pictures. Delete pictures rated d (candidate for deletion). Delete all pictures taken on selected dates. Delete all pictures in the folder currently selected for [Playback folder] in the playback menu.
Playback Folder G button U D playback menu Choose a folder for playback. Option (Folder name) [All] [Current] Description Pictures in all folders with the selected name will be visible during playback. Folders can be renamed using the [Storage folder] > [Rename] option in the photo shooting menu. Pictures in all folders will be visible during playback. Only pictures in the current folder will be visible during playback.
Delete Pictures from Both Slots G button U D playback menu Choose whether deleting a copy of a picture recorded to both memory cards with either [Backup] or a dual-format option ([RAW Slot 1 - JPEG Slot 2] or [JPEG Slot 1 - JPEG Slot 2]) selected for [Role played by card in Slot 2] in the photo shooting menu also deletes the remaining copy. Option [Yes (confirmation required)] [Yes] [Off] Description Before deleting one copy, you will be prompted to choose whether to delete the other.
Filtered Playback Criteria G button U D playback menu Choose the criteria used to choose the pictures displayed during filtered playback (0 255). Picture Review G button U D playback menu Choose whether pictures are automatically displayed immediately after shooting. Option Description Pictures appear in the currently-selected display [On] (monitor or viewfinder) as they are taken. Pictures are displayed after shooting only when the monitor is used to frame shots.
After Delete G button U D playback menu Choose the picture displayed after an image is deleted. Option S [Show next] T [Show previous] • • • • Description The following picture is displayed. If the deleted picture was the last picture, the preceding picture will be displayed. The preceding picture is displayed. If the deleted picture was the first picture, the next picture will be displayed.
After Burst, Show G button U D playback menu Choose whether the photo displayed immediately after a burst of shots is taken in continuous mode is the first or last shot in the burst. • This option takes effect only when [Off] is selected for [Picture review] in the playback menu. 1 DSC_0001.jpg DSC_0002.jpg DSC_0003.jpg DSC_0004.jpg DSC_0014.jpg 2 1 2 Most recent shots (burst) Displayed if [First picture in burst] is selected DSC_0015.
Copy Image(s) G button U D playback menu Copy pictures from one memory card to another when two memory cards are inserted. Option Description [Select source] [Select picture(s)] Choose the card from which pictures will be copied. Select pictures to be copied. [Select destination folder] [Copy picture(s)?] Select the destination folder on the remaining card (the card not selected for [Select source]). Copy the pictures. Copying Pictures 1 Choose [Select source].
3 Choose [Select picture(s)]. Highlight [Select picture(s)] and press 2 to view the [Select picture(s)] display. 4 Select the source folder. • Highlight the folder containing the pictures to be copied and press 2 to display the [Images selected by default] menu. • To copy all pictures from the card in the selected slot, highlight [All pictures in slot], press J, and proceed to Step 10.
5 Make the initial selection. Choose the pictures that will be selected by default. Option [Deselect all] Description None of the pictures in the chosen folder will be selected by default. • Choose this option when you want to select pictures individually. [Select all pictures] All of the pictures in the chosen folder will be selected by default. • Choose this option if you want to copy all or most of the pictures in the folder.
6 Select additional pictures. • Highlight pictures and press the W (Q) button to select; selected pictures are marked with a check ( ). To remove the check ( ) and deselect the current picture, press the W (Q) button again. • To view the highlighted picture full screen, press and hold the X button. • After confirming that all the pictures you want to copy have marks, press J to return to the [Copy image(s)] menu. 7 Choose [Select destination folder].
8 Choose a destination folder. Highlight one of the following options and press 2. Option [Select folder by number] [Select folder from list] Description Enter the number of the destination folder (0 498). If a folder with the selected number does not already exist, a new folder will be created. Choose the destination folder from a list of existing folders.
9 Select the folder. After entering a folder number or highlighting the folder name, press J to select the folder and return to the [Copy image(s)] menu. 10 Choose [Copy picture(s)?]. Highlight [Copy picture(s)?] and press J to display a confirmation dialog. 11 Choose [Yes]. • The camera will display the message “[Copy?]” together with the number of pictures that will be copied. • Highlight [Yes] and press J to copy the selected pictures. • Press J again to exit when copying is complete.
D Cautions: Copying Pictures • Pictures will not be copied if there is insufficient space on the destination card. • If the destination folder contains a file with the same name as one of the pictures to be copied, a confirmation dialog will be displayed. Select [Replace existing picture] or [Replace all] to replace the existing file or files. Protected files in the destination folder will not be replaced. Select [Skip] to continue without replacing existing files.
B The Setup Menu: Camera Setup To view the setup menu, select the B tab in the camera menus.
Item [Location data (built-in)] [Wireless remote (WR) options] [Assign remote (WR) Fn button] 0 737 738 741 [Conformity marking] [Battery info] 741 742 [USB power delivery] 744 Item 0 [Energy saving (photo mode)] 746 [Slot empty release lock] [Save/load menu settings] 747 748 [Reset all settings] [Firmware version] 754 754 D See Also “Setup Menu Defaults” (0 485) B The Setup Menu: Camera Setup 707
Format Memory Card G button U B setup menu Format memory cards. To begin formatting, choose a memory card slot and select [Yes]. Note that formatting permanently deletes all pictures and other data on the card. Before formatting, be sure to make backup copies as required. D Caution: During Formatting Do not turn the camera off or remove memory cards until the message [Formatting memory card] clears from the display.
Time Zone and Date G button U B setup menu Change time zones and set the camera clock. We recommend that the camera clock be adjusted regularly. Option [Time zone] [Date and time] Description Choose a time zone. The time selected for [Date and time] is automatically adjusted for the new time zone. Set the camera clock to the current time in the selected [Time zone]. [Date format] Choose the order in which the day, month, and year are displayed.
Monitor Color Balance G button U B setup menu Adjust monitor color balance to your taste. • [Monitor color balance] can only be adjusted when the monitor is the active display. It cannot be adjusted when [Viewfinder only] is selected for monitor mode or when your eye is to the viewfinder. • Color balance is adjusted using the multi selector. Press 1, 3, 4, or 2 to adjust color balance as shown below. Press J to save changes.
• The reference image is either the last picture taken or, in playback mode, the picture last displayed. If the memory card contains no pictures, an empty frame will be displayed instead. • To choose a different picture, press the W (Q) button. Highlight the desired picture and press J to select it as the reference image. • To view the highlighted picture full frame, press and hold X. Viewfinder Brightness G button U B setup menu • Adjust viewfinder brightness.
Viewfinder Color Balance G button U B setup menu Adjust viewfinder color balance to your taste. [Viewfinder color balance] can only be adjusted when the viewfinder is the active display. It cannot be adjusted when the monitor is on or when [Monitor only] is selected for monitor mode. Otherwise the procedure is the same as for [Monitor color balance] (0 710). Finder Display Size (Photo Lv) G button U B setup menu Choose a magnification for the viewfinder display from [Standard] and [Small].
Limit Monitor Mode Selection G button U B setup menu Choose the monitor modes that can be selected using the M button. • Highlight options and press J or 2 to select (M) or deselect (U). Options marked with a check (M) are available for selection. • To complete the operation, press G. Auto Rotate Info Display G button U B setup menu When [ON] is selected, the indicators in the shooting display will automatically be rotated to match camera orientation.
AF Fine-Tuning Options G button U B setup menu Fine-tune focus for the current lens. • Use only as required. • We recommend that you perform fine-tuning at a focus distance you use frequently. If you perform focus-tuning at a short focus distance, for example, you may find it less effective at longer distances. Option [AF fine-tune] Description Select [ON] to turn fine-tuning on. Fine-tune focus for the current lens.
Option [List saved values] Description List values saved using [Finetune and save lens]. Highlighting a lens in the list and pressing 2 displays a [Choose lens number] dialog. • The [Choose lens number] dialog is used to enter the lens identifier. • In the case of Z mount lenses and some F mount lenses, the lens serial number is entered automatically. [Choose value Choose from multiple fine-tuning values saved for lenses for current of the same type.
Creating and Saving Fine-Tuning Values 1 Attach the lens to the camera. 2 Select [AF fine-tuning options] in the setup menu, then highlight [Fine-tune and save lens] and press 2. An AF fine-tuning dialog will be displayed. 3 Press 4 or 2 to fine-tune autofocus. • Choose from values between +20 and −20. • The current value is shown by g, the previously-selected value by o. • If a zoom lens is attached, you can choose separate fine-tuning values for maximum angle (WIDE) and maximum zoom (TELE).
Choosing a Default Fine-Tuning Value 1 Select [AF fine-tuning options] in the setup menu, then highlight [Default] and press 2. 2 Press 4 or 2 to fine-tune autofocus. • Choose from values between +20 and −20. • The current value is shown by g, the previously-selected value by o. • The larger the fine-tuning value, the farther the focal point is from the lens; the smaller the value, the closer the focal point. 3 Press J to save the new value.
Non-CPU Lens Data G button U B setup menu Record data for non-CPU lenses attached using an optional mount adapter. Recording the focal length and maximum aperture of non-CPU lenses allows them to be used with some camera features normally reserved for CPU lenses, such as on-board vibration reduction. Option [Lens number] [Focal length (mm)] [Maximum aperture] Description Choose a lens identifier. Enter the focal length. Enter the maximum aperture.
Sensor Shield Behavior at Power Off G button U B setup menu If [Sensor shield closes] is selected, the shield in front of the image sensor will close when the camera is turned off. This prevents dust or other foreign matter collecting on the image sensor when lenses are exchanged. It may also, however, increase camera startup times. D Cautions: The Sensor Shield • • The shield can be damaged by touching it when it is closed.
Image Dust Off Ref Photo G button U B setup menu Acquire reference data for the Image Dust Off option in NX Studio. Image Dust Off processes NEF (RAW) pictures to mitigate effects caused by dust adhering in front of the camera image sensor. For more information, refer to NX Studio’s online help. Acquiring Image Dust Off Reference Data 1 Choose a start option. • Highlight [Start] and press J to immediately display the [Image Dust Off ref photo] dialog.
2 With the lens about ten centimeters (four inches) from a well-lit, featureless white object, frame the object so that it fills the display and then press the shutter-release button halfway. • In autofocus mode, focus will automatically be set to infinity. • In manual focus mode, set focus to infinity manually. 3 Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data. • The monitor turns off when the shutter-release button is pressed.
D Caution: Image Sensor Cleaning Dust off reference data recorded before image sensor cleaning is performed cannot be used with photographs taken after image sensor cleaning is performed. Select [Clean sensor and then start] only if the Image Dust Off reference data will not be used with existing photographs. D Cautions: Acquiring Image Dust Off Reference Data • • • An FX-format lens with a focal length of at least 50 mm is recommended. When using a zoom lens, zoom all the way in.
Pixel Mapping G button U B setup menu Pixel mapping checks and optimizes the camera image sensor. If you notice unexpected bright spots appearing in pictures taken with the camera, perform pixel mapping as described below. • Pixel mapping is available only when a Z mount lens or an optional FTZ II/FTZ mount adapter is attached. • To prevent unexpected loss of power, use a fully-charged battery, the supplied charging AC adapter, or an optional AC adapter and power connector.
Image Comment G button U B setup menu Add a comment to new photographs as they are taken. Comments can be viewed in the NX Studio [Info] tab. Input Comment Input a comment of up to 36 characters. Highlight [Input comment] and press 2 to display a text-entry dialog. For information on text entry, see “Text Entry” (0 64). Attach Comment Comments will be attached to pictures taken while [Attach comment] is [ON].
Copyright Information G button U B setup menu Add copyright information to new photographs as they are taken. Copyright information can be viewed in the NX Studio [Info] tab. Artist/Copyright Enter the names of the photographer (maximum 36 characters) and copyright holder (maximum 54 characters). Highlight [Artist] or [Copyright] and press 2 to display a text-entry dialog. For information on text entry, see “Text Entry” (0 64).
D Cautions: Copyright Information • To prevent unauthorized use of the artist or copyright holder names, make sure that [OFF] is selected for [Attach copyright information] before lending or transferring the camera to another person. You will also need to make sure that the artist and copyright fields are blank. • Nikon does not accept liability for any damages or disputes arising from the use of the [Copyright information] option.
Creating, Renaming, Editing, and Copying Presets Highlight [Edit/save] and press 2 to display the [Select preset to edit or save] list of existing presets. • To edit or rename a preset, highlight it and press 2. To create a new preset, highlight “Unused” and press 2. - [Rename]: Rename the preset. - [Edit IPTC information]: Display the selected preset (0 730). Selected fields can be edited as desired. • To copy a preset, highlight it and press X. Highlight the destination, press J, and name the copy.
Embedding Presets Highlighting [Auto embed during shooting] and pressing 2 displays a list of presets. Highlight a preset and press J; the selected preset will be embedded in all subsequent photographs. To disable embedding, select [Off]. D Viewing IPTC Data • Embedded presets can be viewed on the [IPTC data] page in the photo information display. • To display the [IPTC data] page, select (M) both [Shooting data] and [IPTC data] for [Playback display options] in the playback menu.
Copying Presets to the Camera The camera can store up to ten presets; to copy IPTC presets from a memory card to a selected destination on the camera, select [Load/save] > [Slot 1] or [Slot 2], then highlight [Copy to camera] and press 2. • Highlight a preset and press J to proceed to the [Select destination] list. To preview the highlighted preset, press W (Q) instead of pressing J. After previewing the preset, press J to proceed to the [Select destination] list.
D Cautions: IPTC Information • The camera supports standard roman alphanumeric characters only. Other characters will not display correctly except on a computer. • Preset names (0 727) may be up to 18 characters long. If a preset with a longer name is created using a computer, all characters after the eighteenth will be deleted. • The number of characters that may appear in each field is given below. Any characters over the limit will be deleted. 730 Field Caption Max.
D IPTC IPTC is a standard established by the International Press Telecommunications Council (IPTC) with the intent of clarifying and simplifying the information required when photographs are shared with a variety of publications. D IPTC Preset Manager IPTC presets can be created on a computer and saved to memory cards using IPTC Preset Manager software. IPTC Preset Manager can be downloaded free of charge from the URL below. Instructions on use are available via online help. https://downloadcenter.
Voice Memo Options G button U B setup menu Adjust settings for voice memos (0 295). Voice Memo Control Choose how the b button behaves when used to record voice memos. Option [Press and 3 hold] 4 Description Voice memos up to 60 seconds long can be recorded while b button is pressed. Recording begins when b button is pressed and [Press to start/ ends after about 60 seconds or when the control is stop] pressed a second time. Audio Output (Playback) Choose the device used for voice memo playback.
Camera Sounds G button U B setup menu Shutter Sound Choose whether the camera makes a sound when the shutter is released. Selecting [OFF] disables the shutter-release sound. Beep On/Off Turn the beep speaker on or off.
Pitch Choose the pitch of the beep from [High] and [Low]. The pitch of the shutter sound cannot be changed. D Silent Mode Selecting [ON] for [Silent mode] in the setup menu disables the shutterrelease sound and beep speaker. D Caution: Camera Sounds Overlapping beeps and/or shutter sounds may play as a single sound.
Silent Mode G button U B setup menu Select [ON] to override the options selected for [Camera sounds] in the setup menu and mute the electronic shutter and beep speaker during photography. • Selecting [ON] also suppresses other camera sounds. It does not, however, completely silence the camera. Camera sounds may still be audible, for example during autofocus or aperture adjustment, in the latter case most noticeably at apertures smaller (i.e., at f-numbers higher) than f/5.6.
Touch Controls G button U B setup menu Adjust settings for monitor touch controls. Enable/Disable Touch Controls Enable or disable touch controls. Select [Playback only] to enable touch controls in playback mode only. Glove Mode Selecting [ON] raises the sensitivity of the touch screen, making it easier to use while wearing gloves. HDMI G button U B setup menu Adjust settings for connection to HDMI devices (0 302).
USB Connection Priority G button U B setup menu Choose the function assigned priority when the camera is connected to a computer via USB. Option Description [Upload] The monitor remains blank while the camera is connected to a computer. The monitor turns on when the shutter-release button is pressed halfway but upload speeds may drop. [Shooting] The monitor remains on while the camera is connected to a computer. Upload speeds may drop.
Wireless Remote (WR) Options G button U B setup menu Adjust status LED and link mode settings for optional WR-R11a and WR-R10 wireless remote controllers. You can also choose a link mode for connection to optional radio-controlled flash units that support Advanced Wireless Lighting. D WR-R10 Wireless Remote Controllers • • A WR-A10 adapter is required when using the WR-R10. Be sure the firmware for the WR-R10 has been updated to the latest version (version 3.0 or later).
Link Mode Choose a link mode for WR-R11a or WR-R10 wireless remote controllers mounted on other cameras or radio-controlled flash units that support Advanced Wireless Lighting. Be sure that the same mode is selected for the other devices. Option [Pairing] Description The camera connects only to devices with which it has previously been paired. Press the pairing button on the wireless remote controller connected to the camera to pair it with other devices.
Option [PIN] Description Communication is shared among all devices with the same four-digit PIN. Enter a four-digit PIN of your choosing. Press 4 or 2 to highlight digits and press 1 or 3 to change. Press J to enter and display the selected PIN. • This option is a good choice for photography featuring a large number of remote devices.
Assign Remote (WR) Fn Button G button U B setup menu Choose the role played by the Fn button on optional wireless remote controllers equipped with an Fn button. See Custom Setting f2 [Custom controls (shooting)] for more information.
Battery Info G button U B setup menu View information on the battery currently inserted in the camera. Option Description [Charge] The current battery level, expressed as a percentage. The number of pictures taken since the battery was last [No. of shots] charged. An indicator of whether the battery requires calibration. Calibration ensures the accuracy of the battery level display; after the battery has been charged a certain [Calibration] number of times, [j] will be displayed.
D Number of Shots [No. of shots] shows the number of times the shutter has been released. Note that the camera may sometimes release the shutter without recording a photograph, for example when measuring preset manual white balance. D Charging Batteries at Low Temperatures Batteries in general exhibit a drop in capacity at low ambient temperatures.
USB Power Delivery G button U B setup menu Choose whether the supplied charging AC adapter or computers connected via USB can be used to power the camera (USB power delivery). USB power delivery allows the camera to be used while limiting the drain on the battery. Option Description [ON] The camera draws power from connected devices while on. Connected devices will also supply power when the camera is off if Bluetooth upload is in progress or the memory card access lamp is lit.
D Computer USB Power Delivery • Before using a computer to supply power to the camera, check that the computer is equipped with a Type C USB connector. Use a UC-E25 USB cable (available separately) to connect the camera to the computer. • Depending on the model and product specifications, some computers will not supply current to power the camera.
Energy Saving (Photo Mode) G button U B setup menu In photo mode, the shooting display will dim to save power approximately 15 seconds before the standby timer expires. Option [ON] [OFF] Description Enable energy saving. The display refresh rate may drop. Disable energy saving. Note selecting [OFF] does not stop the shooting display dimming a few seconds before the standby timer expires.
Slot Empty Release Lock G button U B setup menu Choose whether the shutter can be released when no memory card is inserted in the camera. Option [Release a locked] b [Enable release] Description The shutter cannot be released when no memory card is inserted. The shutter can be released with no memory card inserted. No pictures will be recorded; during playback, the camera displays [Demo].
Save/Load Menu Settings G button U B setup menu Save current camera menu settings to a memory card. You can also load saved settings, allowing menu settings to be shared among cameras of the same model. • If two memory cards are inserted, the settings will be saved to the card in Slot 1.
• The following settings are saved: Settings that can be saved and loaded [Shooting menu bank] [Extended menu banks] [File naming] [Role played by card in Slot 2] [Image area] [Image quality] [Image size] [RAW recording] [ISO sensitivity settings] [White balance] [Set Picture Control] (Custom Picture Controls are saved as [Auto]) [Color space] PHOTO SHOOTING [Active D-Lighting] MENU [Long exposure NR] [High ISO NR] [Vignette control] [Diffraction compensation] [Auto distortion control] [Photo flicker reduc
Settings that can be saved and loaded [Shooting menu bank] [Extended menu banks] [File naming] [Destination] [Video file type] [Frame size/frame rate] [Image area] [ISO sensitivity settings] [White balance] [Set Picture Control] (Custom Picture Controls are VIDEO RECORDING saved as [Auto]) MENU [HLG quality] [Active D-Lighting] [High ISO NR] [Vignette control] [Diffraction compensation] [Auto distortion control] [Video flicker reduction] [Metering] [Focus mode] [AF-area mode] [AF subject detection options]
Settings that can be saved and loaded [Vibration reduction] (the options available vary with the lens) [Electronic VR] [Microphone sensitivity] [Attenuator] VIDEO RECORDING [Frequency response] MENU [Wind noise reduction] [Mic jack plug-in power] [Headphone volume] [Timecode] (excepting [Timecode origin]) [External rec.
Settings that can be saved and loaded [Language] [Time zone and date] (excepting [Date and time]) [Finder display size (photo Lv)] [Limit monitor mode selection] [Auto rotate info display] [Non-CPU lens data] [Save focus position] [Sensor shield behavior at power off] [Clean image sensor] [Image comment] [Copyright information] SETUP MENU [IPTC] [Voice memo options] [Camera sounds] [Silent mode] [Touch controls] [HDMI] [USB connection priority] [Location data (built-in)] (excepting [Position]) [Wireless re
Settings that can be saved and loaded MY MENU RECENT SETTINGS The current contents of “My Menu” [Choose tab] The current contents of the recent settings menu (up to 20 items) [Choose tab] Save Menu Settings Save settings to a memory card. If the card is full, an error will be displayed and settings will not be saved. Saved settings can only be used with other cameras of the same model. Load Menu Settings Load saved settings from a memory card.
Reset All Settings G button U B setup menu Reset all settings except [Language] and [Time zone and date] to their default values. Copyright information and other user-generated entries are also reset. Once reset, settings cannot be restored. We recommend that you save settings using the [Save/load menu settings] item in the setup menu before performing a reset. Firmware Version G button U B setup menu View the current camera firmware version.
F The Network Menu: Network Connections To view the network menu, select the F tab in the camera menus.
Airplane Mode G button U F network menu Select [ON] to disable the camera’s built-in Bluetooth and Wi-Fi functions. Wired LAN G button U F network menu Select [ON] to connect to Ethernet networks. Connect an Ethernet cable to the camera.
Connect to Smart Device G button U F network menu Connect to smartphones or tablets (smart devices) via Bluetooth or Wi-Fi. Pairing (Bluetooth) Pair with or connect to smart devices using Bluetooth. Option [Start pairing] Description Pair the camera with a smart device (0 313). [Paired devices] List paired smart devices. To connect, select a device from the list. [Bluetooth connection] Select [ON] to enable Bluetooth.
Select Pictures for Upload Select pictures for upload to a smart device. You can also opt to upload pictures as they are taken. Option [Auto select for upload] Description Select [ON] to mark pictures for upload as they are taken. Photos are uploaded in JPEG format at a size of 2 megapixels, even if other upload size and format options are selected with the camera. [Manually select for Upload selected pictures. Transfer marking appears upload] on the selected pictures.
❚❚ Wi-Fi Connection Settings Access the following Wi-Fi settings: [SSID] Option Description Choose the camera SSID. [Authentication/ encryption] Choose [OPEN], [WPA2-PSK], [WPA3-SAE], or [WPA2-PSK/WPA3-SAE]. [Password] Choose the camera password. Choose a channel. • Select [Auto] to have the camera choose the channel automatically. • Select [Manual] to choose the channel manually. [Channel] [Current settings] [Reset connection settings] View current Wi-Fi settings.
Connect to Computer G button U F network menu Connect to computers via Ethernet or wireless LAN. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. ❚❚ Create Profile Create new network profiles (0 329, 346). • If more than one profile already exists, you can press J to choose a profile and connect to the selected network. • To edit an existing profile, highlight it and press 2.
Option [Wireless] [TCP/IP] Description Display connection settings for connection to wireless networks. • Infrastructure mode: Adjust settings for connection to a network via a router. - [SSID]: Enter the network SSID. - [Channel]: Selected automatically. - [Authentication/encryption]: Select the type of encryption used on the wireless network. - [Password]: Enter the network password. • Access-point mode: Adjust settings for direct wireless connection to the camera. - [SSID]: Choose the camera SSID.
❚❚ Copy to/from Card Share network profiles. • If two memory cards are inserted, the profiles will be copied to and from the card in Slot 1. Option Description [Copy Copy profiles from the root directory of the memory card profile from to the camera profile list. card] Copy profiles from the camera to the memory card. [Copy Highlight a profile and press J to copy it to the memory profile to card. card] • Password-protected profiles cannot be copied.
Options Adjust upload settings. ❚❚ Auto Upload Select [ON] to mark new photos for upload as they are taken. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Videos will not be uploaded automatically when recording is complete. They must instead be uploaded from the playback display (0 253). ❚❚ Delete After Upload Select [ON] to delete photographs from the camera memory card automatically once upload is complete.
❚❚ JPEG + JPEG Slot Selection Choose a source slot for auto upload when taking pictures with [JPEG Slot 1 - JPEG Slot 2] selected for [Role played by card in Slot 2] in the photo shooting menu. ❚❚ Upload Folder Mark all photos in a selected folder for upload. Marking will be applied to all photos, regardless of whether they have been uploaded previously. Videos will not be marked for upload. They must instead be uploaded from the playback display. ❚❚ Deselect All? Remove upload marking from all pictures.
Connect to FTP Server G button U F network menu Connect to FTP servers via Ethernet or wireless LAN. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. ❚❚ Create Profile Create new network profiles (0 367, 382). • If more than one profile already exists, you can press J to choose a profile and connect to the selected network. • To edit an existing profile, highlight it and press 2.
Option [Wireless] [TCP/IP] 766 Description Display connection settings for connection to wireless networks. • Infrastructure mode: Adjust settings for connection to a network via a router. - [SSID]: Enter the network SSID. - [Channel]: Selected automatically. - [Authentication/encryption]: Select the type of encryption used on the wireless network. - [Password]: Enter the network password. • Access-point mode: Adjust settings for direct wireless connection to the camera.
Option Description • [FTP] [Server type]: Choose the FTP server type and enter the URL or IP address, destination folder, and port number. An IP address is required. • [PASV mode]: Select [ON] to enable PASV mode. • [Anonymous login]: Select [ON] for anonymous login. This option can only be used with servers that are configured for anonymous login. Select [OFF] to supply a user ID and password. • [Proxy server]: Enable this option as required. ❚❚ Copy to/from Card Share network profiles.
Options Adjust upload settings. ❚❚ Auto Upload Select [ON] to mark new photos for upload as they are taken. • Upload begins only after the photo has been recorded to the memory card. Be sure a memory card is inserted in the camera. • Videos will not be uploaded automatically when recording is complete. They must instead be uploaded from the playback display (0 253). ❚❚ Delete After Upload Select [ON] to delete photographs from the camera memory card automatically once upload is complete.
❚❚ JPEG + JPEG Slot Selection Choose a source slot for auto upload when taking pictures with [JPEG Slot 1 - JPEG Slot 2] selected for [Role played by card in Slot 2] in the photo shooting menu. ❚❚ Overwrite If Same Name Choose [ON] to overwrite files with duplicate names during upload. Choose [OFF] to add numbers to the names of newly uploaded files as necessary to prevent existing files being overwritten. ❚❚ Protect If Marked for Upload Select [ON] to automatically protect files marked for upload.
Connect to Other Cameras G button U F network menu Connect to other cameras for shutter or clock synchronization. Synchronized Release Select [ON] to synchronize the shutter release with those of cameras on the same network. Network Settings Add camera network profiles. This item can also be used to choose from existing network profiles. ❚❚ Create Profile Create new network profiles (0 402).
Option [TCP/IP] Description Adjust TCP/IP settings for infrastructure connections. An IP address is required. • If [ON] is selected for [Obtain automatically], the IP address and sub-net mask for infrastructure mode connections will be acquired via a DHCP server or automatic IP addressing. • Select [OFF] to enter the IP address ([Address]) and subnet mask ([Mask]) manually. ❚❚ Copy to/from Card Share network profiles.
Group Name Choose a group for synchronized release. Shutter release is synchronized across the cameras on the network that are in the same group. Master/Remote Choose a role for each camera from “master” and “remote”. Pressing the shutter-release button on the master camera releases the shutters on all remote cameras that are both on the same network and in the same group. Remote Camera List The master camera lists the remote cameras connected.
USB G button U F network menu Choose the host device type for USB connections. • Select [MTP/PTP] when connecting to computers or Android devices. • Select [iPhone] only when connecting to iPhones via a third-party USB-C to Lightning cable in order to use NX MobileAir (for information on compatible USB-C to Lightning cables, see the online help for NX MobileAir). D “[iPhone]” Selecting [iPhone] disables the camera’s built-in network features. Select [MTP/PTP] except when using NX MobileAir.
Router Frequency Band G button U F network menu Choose the band for the selected SSID when connecting to a wireless network in infrastructure mode. Select [2.4 GHz/5 GHz] to connect to networks operating on either band. • When the camera searches for networks active in the vicinity, it will list only those operating on the chosen band or bands. • The band is listed to the left of the network SSID. • If you select [2.
O My Menu/m Recent Settings To view [MY MENU], select the O tab in the camera menus. O My Menu: Creating a Custom Menu My Menu can be used to create and edit a customized list of up to 20 items from the photo shooting, video recording, Custom Settings, playback, setup, and network menus. Items can be added, deleted, and reordered as described below. ❚❚ Adding Items to My Menu 1 Select [Add items] in [O MY MENU]. Highlight [Add items] and press 2.
2 Select a menu. Highlight the name of the menu containing the item you wish to add and press 2. 3 Select an item. Highlight the desired menu item and press J. 4 Position the new item. Press 1 or 3 to position the new item and press J to add it to My Menu. 5 Add more items. • The items currently displayed in My Menu are indicated by a check mark (L). • Items indicated by a V icon cannot be selected. • Repeat Steps 1–4 to select additional items.
❚❚ Removing Items from My Menu 1 Select [Remove items] in [O MY MENU]. Highlight [Remove items] and press 2. 2 Select items. • Highlight items and press J or 2 to select (M) or deselect. • Continue until all the items you wish to remove are selected (L). 3 Remove the selected items. Press O (Q); a confirmation dialog will be displayed. Press J to remove the selected items.
❚❚ Reordering Items in My Menu 1 Select [Rank items] in [O MY MENU]. Highlight [Rank items] and press 2. 2 Select an item. Highlight the item you wish to move and press J. 3 Position the item. • Press 1 or 3 to move the item up or down in My Menu and press J. • Repeat Steps 2–3 to reposition additional items. 4 Exit to [O MY MENU]. Press the G button to return to [O MY MENU].
❚❚ Displaying [RECENT SETTINGS] 1 Select [Choose tab] in [O MY MENU]. Highlight [Choose tab] and press 2. 2 Select [m RECENT SETTINGS]. • Highlight [m RECENT SETTINGS] in the [Choose tab] menu and press J. • The name of the menu will change from [MY MENU] to [RECENT SETTINGS].
m Recent Settings: Accessing Recently-Used Settings ❚❚ How Items Are Added to [RECENT SETTINGS] Menu items are added to the top of the [RECENT SETTINGS] menu as they are used. The twenty most recently-used settings are listed. D Removing Items from the Recent Settings Menu To remove an item from the [RECENT SETTINGS] menu, highlight it and press the O (Q) button; a confirmation dialog will be displayed. Press O (Q) again to remove the selected item.
Troubleshooting Before Contacting Customer Support You may be able to resolve any issues with the camera by following the steps below. Check this list before consulting your retailer or Nikonauthorized service representative. 1 Check the list of common problems.
D Restoring Default Settings • Depending on current settings, some menu items and other features may be unavailable. To access menu items that are grayed out or features that are otherwise unavailable, try restoring default settings using the [Reset all settings] item in the setup menu. • Note, however, that wireless network profiles, copyright information, and other user-generated entries will also be reset. Once reset, settings cannot be restored.
Problems and Solutions Solutions to some common issues are listed below. Battery/Display The camera is on but does not respond: • Wait for recording and other operations to end. • If the problem persists, turn the camera off. • If the camera does not turn off, remove and reinsert the battery. • If you are using an AC adapter, disconnect and reconnect the AC adapter. - Any data currently being recorded will be lost.
The display in the control panel, viewfinder, or monitor turns off without warning: Choose longer delays for Custom Setting c3 [Power off delay]. ● The control panel is unresponsive and dim: Control panel response times and brightness vary with temperature. ● The viewfinder is unresponsive: The display refresh rate may drop about 20 seconds before the standby timer turns off.
Photos are out of focus: • Is the camera in manual focus mode? To enable autofocus, select AF-S, AF-C, or AF-F for focus mode.
● ● ● ● ● ● 786 The full range of shutter speeds is not available: Using a flash restricts the range of shutter speeds available. Flash sync speed can be set to values of 1/200–1/60 s using Custom Setting e1 [Flash sync speed]. When using flash units that support auto FP high-speed sync, choose [1/250 s (Auto FP)] or [1/200 s (Auto FP)] for shutter speeds as fast as 1/8000 s.
● ● ● ● ● ● Flicker or banding appears in video mode: Select [Video flicker reduction] in the video recording menu and choose an option that matches the frequency of the local AC power supply. Bright regions or bands appear: Bright regions or bands may occur if the subject is lit by a flashing sign, flash, or other light source with brief duration.
Image artifacts appear in the display during shooting: • To reduce noise, adjust settings such as ISO sensitivity, shutter speed, or Active D-Lighting. • At high ISO sensitivities, noise may become more noticeable in long exposures or in pictures recorded when the camera temperature is elevated. • Randomly-spaced bright pixels, fog, or bright spots may arise as a result of increases in the temperature of the camera’s internal circuits. Turn the camera off when it is not in use.
● ● ● ● ● ● The effects of [Set Picture Control] differ from picture to picture: [Auto] is selected for [Set Picture Control] or as the basis for a custom Picture Control created using [Manage Picture Control], or [A] (auto) is selected for [Quick sharp], [Contrast], or [Saturation]. For consistent results over a series of photographs, choose a setting other than [A] (auto). The option selected for metering cannot be changed: The option selected for metering cannot be changed during exposure lock.
Playback ● ● ● ● ● ● ● ● 790 NEF (RAW) pictures are not visible during playback: The camera displays only the JPEG copies of pictures taken with [RAW + JPEG finem], [RAW + JPEG fine], [RAW + JPEG normalm], [RAW + JPEG normal], [RAW + JPEG basicm], or [RAW + JPEG basic] selected for [Image quality]. Pictures taken with other cameras are not displayed: Pictures recorded with other types of camera may not display correctly.
● ● ● ● ● Pictures are not displayed on HDMI devices: Confirm that an HDMI cable is correctly connected. Output to HDMI devices does not function as expected: • Confirm that an HDMI cable is correctly connected. • Is [ON] selected for [External rec. cntrl (HDMI)] in the video recording menu? • Pictures may display correctly if default settings are restored using the [Reset all settings] item in the setup menu.
Bluetooth and Wi-Fi (Wireless Networks) Smart devices do not display the camera SSID (network name): • Navigate to the network menu and confirm both that [OFF] is selected for [Airplane mode] and that [ON] is selected for [Connect to smart device] > [Pairing (Bluetooth)] > [Bluetooth connection]. • Confirm that [Connect to smart device] > [Wi-Fi connection] is enabled in the network menu. • Try disabling and re-enabling wireless network features on the smart device.
Miscellaneous The date of recording is not correct: Is the camera clock set correctly? The clock is less accurate than most watches and household clocks; check it regularly against more accurate timepieces and reset as necessary. ● Menu items cannot be selected: Some items are not available at certain combinations of settings.
Alerts and Error Messages This section lists the alerts and error messages that appear in the control panel and camera display. Alerts The following alerts appear in the control panel and camera display: Alert Camera Control display panel H l Bulb (flashes) Time (flashes) Busy (flashes) 794 Alerts and Error Messages Problem/solution Low battery. Ready spare battery. Lens is not correctly attached. • Ensure that the lens is correctly attached. • Ensure that retractable lenses are extended.
Alert Camera display Control panel Problem/solution Subject too bright; limits of camera exposure metering system exceeded. • Lower ISO sensitivity. • Mode P: Use third-party ND (neutral density) filter (filter can also be used if alert is still displayed after following settings are adjusted in mode S or A). • Mode S: Choose faster shutter speed. (Exposure indicators • Mode A: Choose smaller aperture (higher and shutter speed or f-number).
Alert Camera display Control panel Full (flashes) Err (flashes) 796 Alerts and Error Messages Problem/solution Memory insufficient to record further photos. • Delete pictures from memory card until there is room for additional pictures to be recorded. Copy pictures you wish to keep to computer or other device before proceeding. • Insert new memory card. Camera has run out of file numbers. • Delete pictures from memory card until there is room for additional pictures to be recorded.
Error Messages The following error messages may appear in the camera display: Message Camera display Shutter release disabled. Recharge battery. This battery is unable to provide data to the camera and cannot be used. For safety, choose a battery designated for use in this camera. No memory card. Control panel Problem/solution — Battery exhausted. • Replace with spare battery. • Charge battery. — Battery info not available. • Battery cannot be used. Contact Nikonauthorized service representative.
Message Camera display Cannot access this memory card. Insert another card. This card is not formatted. Format the card. FTZ mount adapter firmware version not supported. Upgrade FTZ firmware. 798 Control panel Problem/solution Error accessing memory card. • Check that camera supports memory card. • Insert new memory card. • If error persists after card has been Card, Err repeatedly ejected and reinserted, card may (flashes) be damaged. Contact retailer or Nikonauthorized service representative.
Message Camera display Recording interrupted. Please wait. The camera is too hot. It cannot be used until it cools. Please wait. Camera will turn itself off. Folder contains no pictures. Control panel — Problem/solution Memory card does not support required video write speed. Use card that supports required write speed or change option selected for [Frame size/ frame rate] in video recording menu. Camera’s internal temperature is elevated. Suspend shooting until camera has cooled.
Message Camera display Cannot display this file. Control panel — Problem/solution File has been modified using computer application or does not conform to DCF file standard. Do not overwrite pictures using computer applications. File is corrupt. Do not overwrite pictures using computer applications. Cannot select this file. This video cannot be edited. This file cannot be saved to the destination memory card. See the camera manual for details. 800 — Selected picture cannot be retouched.
Technical Notes Compatible Lenses and Accessories The camera can be used with all Z mount lenses. Confirm that the lens name includes “NIKKOR Z”. Be sure to update to the latest versions of the camera and lens firmware. With earlier versions, some functions may not be available or the camera may fail to correctly detect the lens. The latest firmware is available from the Nikon Download Center. A Compatible F Mount Lenses F mount lenses can be mounted on Z mount cameras using an FTZ II/FTZ mount adapter.
Camera Displays The displays show information on current settings. Other icons or warnings may occasionally be displayed, for example when settings are changed.
7 8 9 10 11 12 13 14 15 16 17 18 19 20 Focus mode (0 110) Time-lapse video recording indicator (0 556) AF-area mode (0 113) Subject detection (0 119) Flash mode (0 429) Track log indicator (0 204) Satellite signal indicator (0 205) White balance (0 158) Image quality (0 105) Active D-Lighting (0 512) Image size (0 108) Picture Control (0 192) Image area (0 102) Exposure and flash bracketing indicator (0 178) WB bracketing indicator (0 183) ADL bracketing indicator (0 187) HDR indicator (0 538) Multiple exp
29 30 31 32 33 34 35 36 37 38 ISO sensitivity (0 154) ISO sensitivity indicator (0 154) Auto ISO sensitivity indicator (0 156) Exposure compensation indicator (0 143) Flash compensation indicator (0 432) Aperture (0 134, 135) Aperture lock icon (0 665) Shutter speed (0 133, 135) Shutter speed lock icon (0 665) Focus indicator (0 129) Metering (0 520) 39 40 41 42 43 44 45 46 47 48 Autoexposure (AE) lock (0 141) Auto white-balance (AWB) lock (0 647) Touch shooting (0 53, 124) Vibration reduction indicator
The Information Display 1 2 3 4 5 6 7 1 2 3 4 5 Shooting mode (0 132) Flexible program indicator (0 133) Shutter speed lock icon (0 665) Shutter speed (0 133, 135) Aperture lock icon (0 665) 6 7 Aperture (0 134, 135) Exposure indicator Exposure (0 136) Exposure compensation (0 143) Auto bracketing (0 177) Camera Displays 805
1 2 3 12 4 11 10 9 5 8 7 1 2 3 4 806 6 Wi-Fi connection indicator (0 317, 329, 367) Bluetooth connection indicator (0 757) Satellite signal indicator (0 205) Track log indicator (0 204) Exposure and flash bracketing indicator (0 178) WB bracketing indicator (0 183) ADL bracketing indicator (0 187) HDR indicator (0 538) Multiple exposure indicator (0 530) Camera Displays Number of exposures remaining (0 81, 887) Camera control mode (0 854) 6 i icon (0 65) 7 ISO sensitivity (0 154) 8 ISO sensitivity
1 2 3 4 5 6 7 20 19 18 17 8 9 10 16 15 14 11 12 13 1 2 3 4 5 6 7 8 9 t icon (0 87) Interval timer indicator (0 542) Time-lapse video indicator (0 556) Flash control mode (0 426) Silent mode (0 735) Long-exposure noise reduction indicator (0 514) “Beep” indicator (0 733) Battery indicator (0 80) USB power delivery (0 744) Image size (0 108) AF-area mode/subject detection (0 113) 10 11 12 13 14 15 16 17 18 19 20 Focus mode (0 110) View memory card info (0 645) Airplane mode (0 756) Custom control
❚❚ Video Mode 1 2 3 4 5 6 7 8 9 14 13 12 11 1 2 3 4 5 6 7 808 10 Recording indicator (0 93) “No video” indicator (0 94) External recording control (0 302) Video recording time (0 93) Timecode (0 591) Frame size and rate (0 216) Destination (0 578) Time remaining (0 93) Picture Control (0 192) Tone mode (0 215) Camera Displays 8 9 10 11 12 13 14 Image area (0 218) Video file type (0 214) Sound level (0 588) Microphone sensitivity (0 588) Electronic VR indicator (0 587) Headphone volume (0 590) Z
The Viewfinder ❚❚ Photo Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 46 14 45 44 43 15 42 41 40 39 38 18 16 17 19 20 21 37 36 34 32 30 35 33 31 1 2 3 4 5 6 7 Teleconverter indicator View mode (0 624) Release mode (0 145) Focus mode (0 110) AF-area mode (0 113) Subject detection (0 119) Flash mode (0 429) 29 28 26 25 24 22 27 23 8 9 10 11 12 13 White balance (0 158) Active D-Lighting (0 512) Picture Control (0 192) Image quality (0 105) Image size (0 108) Image area (0 102) Camera Displays 809
14 15 16 17 18 19 20 21 810 AF-area brackets (0 113) Focus point (0 123) Exposure and flash bracketing indicator (0 178) WB bracketing indicator (0 183) ADL bracketing indicator (0 187) HDR indicator (0 538) Multiple exposure indicator (0 530) Number of shots in exposure and flash bracketing sequence (0 178) Number of shots in WB bracketing sequence (0 183) Number of shots in ADL bracketing sequence (0 187) HDR strength (0 538) Number of shots in multiple exposure (0 530) Flash compensation indicator (0
38 39 40 41 42 43 44 45 46 Silent mode (0 735) Vibration reduction indicator (0 526) Autoexposure (AE) lock (0 141) Auto white-balance (AWB) lock (0 647) FV lock indicator (0 434) Time-lapse video indicator (0 556) Interval timer indicator (0 542) t icon (0 87) “No memory card” indicator (0 81, 804) Memory card high-temperature warning (0 82) Temperature warning Flicker detection (0 518) Camera Displays 811
❚❚ Video Mode 1 2 3 4 5 6 7 8 9 14 13 12 11 10 1 2 3 4 5 6 7 8 812 Headphone volume (0 590) Zebra pattern (0 686) Picture Control (0 192) Tone mode (0 215) Frame size and rate (0 216) Image area (0 218) Video file type (0 214) Time remaining (0 93) Destination (0 578) Camera Displays 9 10 11 12 13 14 Video recording time (0 93) Timecode (0 591) Electronic VR indicator (0 587) Microphone sensitivity (0 588) Sound level (0 588) External recording control (0 302) Recording indicator (0 93) “No video”
The Control Panel ❚❚ Photo Mode 1 23 4 567 8 21 20 19 18 9 10 11 12 13 17 16 15 14 1 2 3 4 Shooting mode (0 132) Flexible program indicator (0 133) Shutter speed lock icon (0 665) Shutter speed (0 133, 135) Exposure compensation value (0 143) Flash compensation value (0 432) Number of shots in exposure and flash bracketing sequence (0 178) Number of shots in WB bracketing sequence (0 183) Intervals remaining in interval timer sequence (0 545) Shots remaining in focus shift sequence (0 569) Track log
Aperture lock icon (0 665) Aperture (0 134, 135) Exposure and flash bracketing increment (0 178) WB bracketing increment (0 183) Number of shots in ADL bracketing sequence (0 187) Interval-timer frame count (0 545) Focus-shift frame count (0 569) Satellite signal indicator (0 205) Wi-Fi connection indicator (0 317, 329, 367) Bluetooth indicator (0 757) Computer connection (0 854) 9 Battery indicator (0 80) 10 USB power delivery (0 744) 11 Exposure indicator Exposure (0 136) Exposure compensation (0 143) Exp
❚❚ Video Mode 1 2 1 2 Exposure compensation value (videos; 0 143) Available recording time (0 578) Camera Displays 815
Compatible Flash Units The Nikon Creative Lighting System (CLS) Nikon’s advanced Creative Lighting System (CLS) supports a variety of features thanks to improved communication between the camera and compatible flash units.
❚❚ The SB-5000 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 2 4 — 4 4 4 4 4 4
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 4 4 4 — 4 5 4 6 4 4 4 4 1 Not available with spot metering. 2 Can also be selected via the flash unit. 3 Choice of qA and A depends on the option selected with the master flash.
❚❚ The SB-910, SB-900, and SB-800 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update — 4 — 4 5 4 6 4 4 — 4 7 1 Not available with spot metering. 2 Can also be selected via the flash unit. 3 qA/A mode selection is performed on the flash unit using custom settings.
❚❚ The SB-700 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 — — 4 4 — 4 4 4 — —
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 1 Not available with spot metering. 2 Available only in i-TTL, GN, and M flash-control modes. 3 Available only in i-TTL flash-control mode.
❚❚ The SB-600 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 2 — — — 4 — — — — —
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 1 2 3 4 824 Not available with spot metering. Can also be selected via the flash unit. Available only in i-TTL and M flash-control modes. Available only in i-TTL flash-control mode.
❚❚ The SB-500 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 — — — 4 2 — 4 2 4 2
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 1 2 3 4 826 — 4 4 4 3 4 4 4 4 4 4 Not available with spot metering. Can be selected using the [Flash control] item in the camera menus. Available only in i-TTL and M flash-control modes.
❚❚ The SB-R200 Supported features Single flash i-TTL i-TTL balanced fill-flash — Standard i-TTL fill-flash Auto aperture — — qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash — — — — — — — —
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) — — Color Information Communication (LED light) — 4 1 4 2 — 4 — — Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 1 Available only in i-TTL and M flash-control modes. 2 Available only in i-TTL flash-control mode.
❚❚ The SB-400 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 — — — 4 2 — — — — —
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update — 4 — — 4 3 4 — 4 — 1 Not available with spot metering. 2 Can be selected using the [Flash control] item in the camera menus. 3 Available only in i-TTL flash-control mode.
❚❚ The SB-300 Supported features Single flash i-TTL i-TTL balanced fill-flash Standard i-TTL fill-flash Auto aperture qA A Non-TTL auto GN Distance-priority manual M Manual RPT Repeating flash Optical Advanced Wireless Lighting Master Remote flash control i-TTL i-TTL [A : B] Quick wireless flash control qA Auto aperture A Non-TTL auto M Manual RPT Repeating flash Remote i-TTL i-TTL [A : B] Quick wireless flash control qA/A Auto aperture/non-TTL auto M Manual RPT Repeating flash 4 1 4 — — — 4 2 — — — — —
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) Color Information Communication (LED light) Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update — 4 — — 4 3 — — 4 4 1 Not available with spot metering. 2 Can be selected using the [Flash control] item in the camera menus. 3 Available only in i-TTL flash-control mode.
❚❚ The SU-800 Wireless Speedlight Commander When mounted on a CLS-compatible camera, the SU-800 can be used as a commander for SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, or SB-R200 flash units. Group flash control is supported for up to three groups. The SU-800 itself is not equipped with a flash.
Supported features Radio-controlled Advanced Wireless Lighting Color Information Communication (flash) — — Color Information Communication (LED light) — 4 2 4 3 — 4 — — Auto FP high-speed sync FV lock Red-eye reduction Camera modeling illumination Unified flash control Camera flash unit firmware update 1 Available during close-up photography only. 2 Not available when RPT is selected as the flash control mode for the remote flash unit.
Notes on Optional Flash Units Be sure also to consult documentation for the optional flash unit before use. • If the unit supports CLS, refer to the section on CLS-compatible digital SLR cameras. This camera is not included in the “digital SLR” category in the documentation for the SB-80DX, SB-28DX, and SB-50DX.
• The SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, and SB-400 provide red-eye reduction in red-eye reduction and slow-sync with red-eye reduction flash modes. • “Noise” in the form of lines may appear in flash photographs taken with an SD-9 or SD-8A high-performance battery pack attached directly to the camera. Reduce ISO sensitivity or increase the distance between the camera and the battery pack. • The camera provides AF-assist illumination as required.
D Flash Photography Flash photography cannot be combined with some camera features, including: • silent mode, • video recording, • high-speed frame capture, and • HDR overlay. D Using FV Lock with Optional Flash Units • FV lock is available with optional flash units in TTL and (where supported) monitor pre-flash qA and monitor pre-flash A flash control modes (see the documentation provided with the flash unit for more information).
D Metering Areas for FV Lock The areas metered when FV lock is used with optional flash units are as follows: • Stand-Alone • Flash control mode Metered area i-TTL Auto aperture (qA) 6-mm circle in center of frame Area metered by flash exposure meter Remote Flash control mode i-TTL Metered area Entire frame Auto aperture (qA) Non-TTL auto (A) Area metered by flash exposure meter D Flash Compensation for Optional Flash Units In i-TTL and auto aperture (qA) flash control modes, the flash compensatio
A Modeling Illumination • Pressing the control to which [Preview] has been assigned using Custom Setting f2 [Custom controls (shooting)] causes CLS-compatible flash units to emit a modeling flash. • This feature can be used with Advanced Wireless Lighting to preview the total lighting effect achieved with multiple flash units. • The effects of shadows cast by the flash are best observed directly rather than in the shooting display.
Compatible Accessories A variety of accessories are available for your Nikon camera. D Compatible Accessories • • Availability may vary with country or region. See our website or brochures for the latest information. ● Power Sources • EN-EL18d Rechargeable Li-ion Battery: EN-EL18d batteries can be used with Nikon Z 9 digital cameras. - EN-EL18c, EN-EL18b, EN-EL18a, and EN-EL18 batteries can also be used. Note, however, that fewer pictures can be taken on a single charge than with the EN-EL18d (0 889).
• EP-6a Power Connector, EH-6d AC Adapter: Use AC adapters to power the camera for extended periods. - The EP-6a is needed to connect the EH-6d to the camera. See “Attaching a Power Connector and AC Adapter” (0 852) for details. - EH-6c, EH-6b, EH-6a, and EH-6 AC adapters can be used in place of the EH-6d. ● Filters • Neutral Color (NC) filters can be used to protect the lens. • Filters may cause ghosting when the subject is framed against a bright light, or when a bright light source is in the frame.
● Remote Terminal Accessories The camera is equipped with a ten-pin remote terminal for remote control and automatic photography. Be sure to replace the terminal cap when the terminal is not in use. Dust or other foreign matter accumulating in the terminal contacts could cause the camera to malfunction. • MC-22/MC-22A Remote Cords (length approximately 1 m/3.
● USB Cables • UC-E24 USB Cable: A USB cable with a type C connector for connection to • the camera and a type A connector for connection to the USB device. UC-E25 USB Cable: A USB cable with two type C connectors. Accessory Shoe Covers BS-1 Accessory Shoe Cover: A cover protecting the accessory shoe when no flash unit is attached. ● Body Caps BF-N1 Body Cap: The body cap prevents dust entering the camera when no lens is in place.
● Flash Units • SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, SB-400, SB-300, and SB-R200 Speedlights: These units can be mounted on the camera for flash photography. Some also support wireless remote control for off-camera flash photography with multiple flash units. - See the documentation supplied with each Speedlight for information on mounting the unit on the camera.
● Microphones • ME-1 Stereo Microphone: Connect the ME-1 to the camera microphone jack to record stereo sound. Using an external microphone also reduces the chance of picking up equipment noise, such as the sounds produced during video recording when focus is achieved using autofocus. • ME-W1 Wireless Microphone: A wireless Bluetooth microphone. Use the ME-W1 for off-camera recording.
D Charging Batteries Compatible batteries can be charged using the devices below. Battery EN-EL18d EN-EL18c EN-EL18b EN-EL18a EN-EL18 Battery charger MH-33 MH-26a 4 4 4 — — Charging AC adapter — 4 4 4 4 4 4 4 — — D Attaching and Removing the Accessory Shoe Cover The BS-1 accessory shoe cover slides into the shoe as shown. To remove the cover, hold the camera firmly, press the cover down with a thumb and slide it in the direction shown.
D The HDMI/USB Cable Clip To prevent accidental disconnection, attach the supplied clip to HDMI or USB cables as shown (note that the clip may not fit all cables). • The illustrations show the USB cable. Pass HDMI cables through the other channel. • Keep the monitor in the storage position when using the cable clip.
D The Memory Card Slot Cover The camera features a removable memory card slot cover. • After opening the memory card slot cover, slide the memory card slot cover release latch in the direction shown until it latches (q) and then remove the cover from the camera (w). • Be careful not to slide the memory card slot cover release latch back down after removing the memory card slot cover. The cover cannot be re-attached with the latch lowered.
• To re-attach the memory card slot cover, follow the steps below. - Insert the top hinge into the top socket on the camera body (q). - Insert the end of the sprung hinge (e) into the hinge socket (w). - Keeping the bottom hinge aligned with the bottom socket (r), slide the memory card slot cover release latch down until it clicks into place in its original position (t).
Calibrating Batteries The MH-33 battery charger can detect whether batteries require calibration and calibrate them as necessary to ensure the accuracy of the battery level display. Calibration status and progress are shown by lamps on the battery charger: CHARGE % 6h 100 4h 80 2h 50 1 2 CALIBRATION 1 2 Charge lamps Calibration lamp 3 3 Calibration button If the calibration lamp flashes when a battery is inserted, the battery needs to be calibrated.
To begin calibration, press the calibration button for about a second. The charge lamps and calibration lamp light red while calibration is in progress.
Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connector and AC adapter. 1 Remove the BL-7 battery chamber cover. Lift the battery chamber cover latch, turn it to the open (A) position (q), and remove the BL-7 battery chamber cover (w). 2 Connect the EH-6d AC adapter to the EP-6a power connector. • Pass the DC cable over the power connector cable guide (q) and slide it down until it is at the bottom of the slot.
3 Insert the power connector. Fully insert the power connector into the battery chamber as shown. 4 Latch the power connector. • Rotate the latch to the closed position (q) and fold it down as shown (w). • To prevent the power connector being dislodged during operation, be sure that it is securely latched. • The battery level is not displayed in the control panel while the camera is powered by the AC adapter and power connector.
Software The following Nikon software can be used with the camera. For more information, visit the Nikon website for your country or region. ● Computer Software Nikon computer software is available from the Nikon Download Center. Check the version and system requirements and be sure to download the latest version. https://downloadcenter.nikonimglib.
• Webcam Utility: The Webcam Utility lets you use your camera as a webcam when it is connected to the computer via USB. The camera will appear as “Webcam Utility” in web conferencing apps. Selecting “Webcam Utility” converts the camera into a webcam. For information on compatible cameras, system requirements, and using the Webcam Utility, as well as on the precautions to be observed during use, see the Webcam Utility page in the Nikon Download Center.
Caring for the Camera Long-Term Storage When the camera will not be used for an extended period, remove the battery. Before removing the battery, confirm that the camera is off. Do not store the camera in locations that: • are poorly ventilated or subject to humidities of over 60%, • are next to equipment that produces strong electromagnetic fields, such as televisions or radios, or • are exposed to temperatures above 50 °C (122 °F) or below −20 °C (−4 °F).
Cleaning The procedure varies with the part that requires cleaning. The procedures are detailed below. • Do not use alcohol, thinner, or other volatile chemicals. ❚❚ Camera Body Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampened in distilled water and dry the camera thoroughly. Important: Dust or other foreign matter inside the camera may cause product malfunction.
Image Sensor Cleaning Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the surface of the image sensor and affect your photographs. The “clean image sensor” option vibrates the sensor to remove dust. The image sensor can be cleaned at any time from the menus, or cleaning can be performed automatically when the camera is turned off. If image sensor cleaning fails to resolve the problem, contact a Nikonauthorized service representative.
❚❚ Cleaning the Image Sensor at Shutdown Option [Clean at 6 shutdown] [Cleaning off] Description The image sensor is automatically cleaned during shutdown each time the camera is turned off. Automatic image sensor cleaning off. 1 Select [Automatic cleaning] for [Clean image sensor]. Pressing 2 when [Automatic cleaning] is highlighted displays [Automatic cleaning] options. 2 Highlight an option. Press J to select the highlighted option.
Manual Cleaning If foreign matter cannot be removed from the image sensor using image sensor cleaning, the sensor can be cleaned manually as described below. Note, however, that the sensor is extremely delicate and easily damaged; we recommend that manual cleaning be performed only by a Nikon-authorized service representative. • Select [Sensor shield stays open] for [Sensor shield behavior at power off] in the setup menu. 1 Turn the camera off and remove the lens.
D Foreign Matter on the Image Sensor Foreign matter entering the camera when lenses or body caps are removed or exchanged (or in rare circumstances lubricant or fine particles from the camera itself) may adhere to the image sensor, where it may appear in photographs taken under certain conditions.
Caring for the Camera and Battery: Cautions Cautions: Using the Camera ● Do Not Drop Do not drop the camera or lens or subject them to blows. The product may malfunction if subjected to strong shocks or vibration. ● Keep Dry Keep the camera dry. Rusting of the internal mechanism caused by water inside the camera can not only be expensive to repair but can in fact cause irreparable damage.
Lasers and Other Bright Light Sources Do not direct lasers or other extremely bright light sources toward the lens, as this could damage the camera’s image sensor. ● Cleaning When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in fresh water and then dry the camera thoroughly.
● Do Not Touch the Sensor Shield If [Sensor shield closes] is selected for [Sensor shield behavior at power off] in the setup menu, the sensor shield in front of the image sensor will close when the camera turns off. Never pierce or apply pressure to the sensor shield. Failure to observe this precaution could scratch or otherwise damage the shield. ● The Lens Contacts Keep the lens contacts clean. Avoid touching them with your fingers.
Turn the Product Off Before Removing or Disconnecting the Power Source Removing or disconnecting the power source while the camera is on could damage the product. Particular care should be taken not to remove or disconnect the power source while pictures are being recorded or deleted. ● ● Monitor/Viewfinder • The monitors (including viewfinder) are constructed with extremely high • • • • precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective.
Cautions: Using Batteries ● Precautions for Use • If improperly handled, batteries may rupture or leak, causing the product • • • • 866 to corrode. Observe the following precautions when handling batteries: - Turn the product off before replacing the battery. - Batteries may be hot after extended use. - Keep the battery terminals clean. - Use only batteries approved for use in this equipment. - Do not short or disassemble batteries or expose them to flame or excessive heat.
• • • • • Do not use the battery at ambient temperatures below −10 °C (14 °F) or above 40 °C (104 °F). Failure to observe this precaution could damage the battery or impair its performance. Charge the battery indoors at ambient temperatures of 5 °C–35 °C (41 °F–95 °F). The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
● Have Fully-Charged Spare Batteries Ready on Cold Days Partially-charged batteries may not function on cold days. In cold weather, charge one battery before use and keep another in a warm place, ready to be exchanged as necessary. Once warmed, cold batteries may recover some of their charge. ● Battery Level • Turning the camera on or off repeatedly when the battery is fully discharged will shorten battery life. Batteries that have been fully discharged must be charged before use.
Cautions: Using the Charger • • • • • • Do not move the charger or touch the battery during charging; failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again. Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger.
Specifications Nikon Z 9 Digital Camera Type Type Digital camera with support for interchangeable lenses Lens mount Nikon Z mount Lens Compatible lenses • • Z mount NIKKOR lenses F mount NIKKOR lenses (mount adapter required; restrictions may apply) Effective pixels Effective 45.7 million pixels Image sensor 870 Type Total pixels 35.9 × 23.9 mm CMOS sensor (Nikon FX format) 52.
Storage • • Image size (pixels) • • • File format (image quality) • • [FX (36 × 24)] selected for image area: - 8256 × 5504 (Large: 45.4 M) - 6192 × 4128 (Medium: 25.6 M) - 4128 × 2752 (Small: 11.4 M) [DX (24 × 16)] selected for image area: - 5392 × 3592 (Large: 19.4 M) - 4032 × 2688 (Medium: 10.8 M) - 2688 × 1792 (Small: 4.8 M) [1:1 (24 × 24)] selected for image area: - 5504 × 5504 (Large: 30.3 M) - 4128 × 4128 (Medium: 17.0 M) - 2752 × 2752 (Small: 7.
Storage Picture Control System Auto, Standard, Neutral, Vivid, Monochrome, Portrait, Landscape, Flat, Creative Picture Controls (Dream, Morning, Pop, Sunday, Somber, Dramatic, Silence, Bleached, Melancholic, Pure, Denim, Toy, Sepia, Blue, Red, Pink, Charcoal, Graphite, Binary, Carbon); selected Picture Control can be modified; storage for custom Picture Controls Media CFexpress (Type B) and XQD memory cards The card in Slot 2 can be used for overflow or backup storage, for separate storage of NEF (RAW)
Shutter Type Speed Flash sync speed Electronic shutter with shutter sound and sensor shield 1/ 1 1 32000 –30 s (choose from step sizes of /3, /2, and 1 EV, extendable to 900 s in mode M), bulb, time Flash synchronizes with shutter at speeds of 1/250 or 1/200 s or slower (but note that the guide number drops at speeds of 1/200 to 1/250 s); sync speeds as fast as 1/8000 s are supported with auto FP high-speed sync Release Release mode Single frame, continuous low-speed, continuous highspeed, high-speed fra
Exposure Range −3–+17 EV * Figures are for ISO 100 and f/2.0 lens at 20 °C/68 °F Mode P: programmed auto with flexible program, S: shutterpriority auto, A: aperture-priority auto, M: manual Exposure compensation Exposure lock −5–+5 EV (choose from step sizes of 1/3 and 1/2 EV) Luminosity locked at detected value ISO 64–25600 (choose from step sizes of 1/3 and 1 EV); ISO sensitivity can also be set to approx. 0.3, 0.7, or 1 EV (ISO 32 (Recommended equivalent) below ISO 64 or to approx. 0.3, 0.
Autofocus AF-area mode Focus lock Pinpoint (available in photo mode only), single-point, dynamic-area (S, M, and L; available in photo mode only), wide-area (S and L), and auto-area AF; 3D-tracking (available in photo mode only); subject-tracking AF (available in video mode only) Focus can be locked by pressing shutter-release button halfway (single-servo AF/AF-S) or by pressing the center of the sub-selector Vibration reduction (VR) Camera on5-axis image sensor shift board VR Lens on-board Lens shift (
Flash i-TTL flash control, radio-controlled Advanced Wireless Nikon Creative Lighting, optical Advanced Wireless Lighting, modeling Lighting illumination, FV lock, Color Information Communication, System (CLS) auto FP high-speed sync, unified flash control Sync terminal ISO 519 sync terminal with locking thread White balance White balance Auto (3 types), natural light auto, direct sunlight, cloudy, shade, incandescent, fluorescent (3 types), flash, choose color temperature (2500–10,000 K), preset manual
Video File format Video compression Audio recording format Audio recording device Exposure compensation MOV, MP4 Apple ProRes 422 HQ (10 bit), H.265/HEVC (8 bit/10 bit), H.
Interface USB HDMI output Audio input Audio output Ten-pin remote terminal Ethernet 878 Specifications Type C USB connector (SuperSpeed USB); connection to built-in USB port is recommended Type A HDMI connector Stereo mini-pin jack (3.5 mm diameter; plug-in power supported) Stereo mini-pin jack (3.5 mm diameter) Built-in (can be used with MC-30A/MC-36A remote cords and other optional accessories) RJ-45 connector • Standards: IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.
Wi-Fi/Bluetooth • Wi-Fi Standards: - IEEE 802.11b/g/n (Africa, Asia, and Oceania) - IEEE 802.11b/g/n/a/ac (Europe, U.S.A., Canada, Mexico) - IEEE 802.11b/g/n/a (other countries in the Americas) • Operating frequency: - 2412–2462 MHz (channel 11; Africa, Asia, and Oceania) - 2412–2462 MHz (channel 11) and 5180–5825 MHz (U.S.A.
Location Data Supported GNS systems GPS (USA), GLONASS (Russia), QZSS (Japan) Data acquired Latitude, longitude, altitude, UTC (Universal Coordinated Time) Clock Camera clock can be set to time acquired via GNSS synchronization Track logs NMEA-compliant Log interval Maximum log recording time 15 s, 30 s, 1 min., 2 min., 5 min.
Dimensions/weight Dimensions (W × H × D) Approx. 149 × 149.5 × 90.5 mm/5.9 × 5.9 × 3.6 in. Weight Approx. 1340 g (2 lb. 15.3 oz.) with battery and memory card but without body cap and accessory shoe cover; approx. 1160 g/2 lb. 9 oz. (camera body only) Operating environment Temperature −10 °C–40 °C (+14 °F–104 °F) Humidity 85% or less (no condensation) • Unless otherwise stated, all measurements are performed in conformity with Camera and Imaging Products Association (CIPA) standards or guidelines.
❚❚ MH-33 Battery Charger Rated input Charging output Supported batteries Charging time Operating temperature Dimensions (W × H × D) Weight DC 5 V/9 V, 3 A/3 A DC 12.6 V, 1.6 A EN-EL18d, EN-EL18c, and EN-EL18b rechargeable Li-ion batteries Approx. 4 hours (approx. 3 hours with EN-EL18c/ EN-EL18b batteries) * Time required to charge battery at an ambient temperature of 25 °C (77 °F) when no charge remains 0 °C–40 °C (+32 °F–104 °F) Approx. 87 × 25 × 86.5 mm /3.5 × 1 × 3.5 in., excluding projections Approx.
❚❚ EH-7P Charging AC Adapter Rated input AC 100–240 V, 50/60 Hz, MAX 0.5 A Rated output Supported batteries DC 5.0 V/3.0 A, 15.0 W EN-EL18d, EN-EL18c, and EN-EL18b rechargeable Li-ion batteries Operating temperature 0 °C–40 °C (+32 °F–104 °F) Average active 81.80% efficiency Efficiency at low 72.50% load (10%) No-load power consumption 0.075 W Dimensions (W × H × D) Weight Approx. 65.5 × 26.5 × 58.5 mm/2.6 × 1.1 × 2.4 in., excluding plug adapter Approx. 135 g (4.
A Notice for Customers in Europe Distributor (Importer for EU Countries) Nikon Europe B.V.
D Caution: Disposing of Data Storage Devices Please note that deleting pictures or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
Approved Memory Cards • The camera can be used with CFexpress (Type B) and XQD memory cards. • CFexpress or XQD cards with a maximum data transfer rate of at least 250 MB/s are recommended for high-speed frame capture. • CFexpress or XQD cards with a maximum data transfer rate of at least 45 MB/s (300×) are recommended for video recording and playback.
Memory Card Capacity The following table shows buffer capacity and the approximate number of pictures that can be stored on a 325 GB 1 card at different image qualities (0 105) and sizes (0 108) when [FX (36 × 24)] is selected for [Choose image area]. Actual capacity varies with shooting conditions and the type of card. Image quality Image size File size Number of exposures remaining 2 Buffer capacity 2, 3 NEF (RAW), lossless compression — Approx. 55.
Image quality JPEG basic 4 Image size File size Number of exposures remaining 2 Large Approx. 5.3 MB 39,900 frames Medium Approx. 3.4 MB 65,200 frames Small Approx. 1.9 MB 123,000 frames Buffer capacity 2, 3 Over 1000 frames 1 Figures are for a ProGrade Digital COBALT 1700R 325GB memory card (as of September 2021) with a NIKKOR Z 50mm f/1.8S lens mounted on the camera. 2 Number of pictures that can be saved to memory card or stored in memory buffer varies with scene recorded.
Battery Endurance The video footage or number of shots that can be recorded with a fullycharged EN-EL18d rechargeable Li-ion battery 1 is given below 2. Actual endurance varies with such factors as the condition of the battery, the interval between shots, and the options selected in the camera menus. Photo Mode (Single Frame): Number of Shots 3 • [Viewfinder only] selected for monitor mode with: - [ON] selected for [Energy saving (photo mode)] in the setup menu: Approx.
Actions such as the following can reduce battery endurance: • keeping the shutter-release button pressed halfway, • repeated autofocus operations, • taking NEF (RAW) photographs, • slow shutter speeds, • using camera Wi-Fi (wireless LAN) and Bluetooth features, • using the built-in GNSS receiver, • using the camera with optional accessories connected, • repeatedly zooming in and out, and • taking pictures at low ambient temperatures.
To ensure that you get the most from rechargeable Nikon EN-EL18d batteries: • Keep the battery contacts clean. Soiled contacts can reduce battery performance. • Use batteries immediately after charging. Batteries will lose their charge if left unused. 1 EN-EL18c, EN-EL18b, EN-EL18a, and EN-EL18 batteries can also be used. Note, however, that fewer pictures can be taken on a single charge than with the EN-EL18d. 2 Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with a SONY CEB-G128 memory card.
Trademarks and Licenses • CFexpress is a trademark of the CompactFlash Association in the United States and other countries. • NVM Express is a trademark of NVM Express Inc. in the United States and other countries. • XQD is a trademark of Sony Corporation. • Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. • Apple®, App Store®, the Apple logos, iPhone®, iPad®, Mac, and macOS are trademarks of Apple Inc. registered in the U.S.
• The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Nikon is under license. • Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. • Powered by intoPIX technology. • All other trade names mentioned in this document or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders.
D FreeType License (FreeType2) Portions of this software are copyright © 2012 The FreeType Project (https://www.freetype.org). All rights reserved. D MIT License (HarfBuzz) Portions of this software are copyright © 2018 The HarfBuzz Project (https://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved. D Unicode® Character Database License (Unicode® Character Database) The software for this product uses the Unicode® Character Database License open-source software.
THE DATA FILES AND SOFTWARE ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
D BSD License (NVM Express Driver) The license for the open-source software included in the camera’s NVM Express driver is as follows: https://imaging.nikon.com/support/pdf/LicenseNVMe.pdf D Other Open-Source Software Additional open-source licenses can be found at the URL below: https://imaging.nikon.com/oss/en/index.
Cautions: Location Data (GPS/ GLONASS) ● Location Data and Track Logs • If [ON] is selected for [Location data (built-in)] > [Record location data] in the setup menu or log tracking is in progress, the camera will continue to acquire log and/or location even while off. • Personal information may be inferred from the location data stored in track logs or embedded in photos and videos.
Notices ● Notices for Customers in the U.S.A. The Battery Charger IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS Federal Communications Commission (FCC) Radio Frequency Interference Statement This device complies with part 15 of the FCC Rules.
CAUTIONS Modifications The FCC requires the user to be Z9 notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment. Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.Tel.
● Notices for Customers in Europe CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that electrical and electronic equipment is to be collected separately. The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Bluetooth and Wi-Fi (Wireless LAN) This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change). The use of wireless devices may be prohibited in some countries or regions.
Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted.
FCC/ISED RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Notice for Customers in Europe and in Countries Complying with the Radio Equipment Directive Hereby, Nikon Corporation declares that the radio equipment type Z 9 is in compliance with Directive 2014/53/EU. The full texts of the EU declarations of conformity are available at the following internet addresses: https://imaging.nikon.com/support/pdf/DoC_N2014.pdf ● Wi-Fi • Operating frequency: - 2412–2462 MHz (channel 11; Africa, Asia, and Oceania) - 2412–2462 MHz (channel 11) and 5180–5825 MHz (U.S.A.
● Notice for Customers in Singapore Trade Name: Model: Z 9 This device complies with radio-frequency regulations. The content of certification labels not affixed to the device is given below.
A Certificates 906 Bluetooth and Wi-Fi (Wireless LAN)
Index Symbols P (Programmed auto) ......................... 133 S (Shutter-priority auto) .................... 133 A (Aperture-priority auto)................ 134 M (Manual) .................................................... 135 U (Single frame) ...................................... 145 V (Continuous low-speed)........ 145 W (Continuous high-speed) ..... 145 E (Self-timer) ................................. 146, 152 c (Quick release-mode selection) ... 146, 148 3 (Pinpoint AF) .............................
Assign remote (WR) Fn button ... 741 Attaching a lens .......................................... 83 Attenuator .................................................... 589 Auto (Set Picture Control) ............... 193 Auto (White balance) .......................... 159 Auto bracketing ....................................... 177 Auto bracketing (mode M)............. 641 Auto distortion control......... 517, 584 Auto c ISO sensitivity control ...... 640 Auto ISO sensitivity control ...........
Detaching lenses ........................................84 Diffraction compensation .. 517, 584 Diopter adjustment control ..............52 Direct sunlight (White balance). 159 DISP button ................................. 44, 48, 230 Distortion control................................... 282 D-Lighting..................................................... 280 Dual-format recording PB slot .... 695 DX (24×16) (Image area) .................. 103 DX format ......................................................
Frequency response............................. 589 Full-frame playback .............................. 227 Full-frame playback flicks ................ 670 Full-time AF.................................................. 111 FV lock .............................................................. 434 FX (36×24) (Image area) ................... 103 FX format ....................................................... 103 FX-based video format ...................... 219 G S (Q) button ...............................
Manual focus ring in AF mode ... 611 Matrix metering ....................................... 520 Matrix metering face detection. 613 Maximum shots per burst .............. 619 Memory card ..................................... 81, 886 Memory card capacity ....................... 887 G button ......................................................59 Metering ......................................................... 520 MF (Manual focus)....................... 111, 129 Mic jack plug-in power ...................
Quick crop ..................................................... 241 Quick release-mode selection.... 146, 148 Quick sharp (Set Picture Control)196 R Rating ................................................................ 251 RAW recording .......................................... 507 RAW Slot 1 - JPEG Slot 2 (Role played by card in Slot 2) ................................. 503 Rear-curtain sync .................................... 431 Recent settings .........................................
Time zone and date .................... 85, 709 Timecode ....................................................... 591 Time-lapse video .................................... 556 Toning (Set Picture Control) ......... 196 Touch controls ................................. 53, 736 Touch shutter ............................................ 124 Trim..................................................................... 273 Trim video ..................................................... 290 Two-button reset ..........
No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
