Owner's Manual

Alerts and error messages
522
Alert Problem Solution
(The
e
xposure
indicator and
shutter
speed or
aperture
display ash)
Subject too bright;
limits of camera
exposure metering
system exceeded.
･ Lower ISO sensitivity.
･ Shooting mode P: Use third-party
ND (neutral density) lter (lter can
also be used if alert is still displayed
after following settings are
adjusted in mode S or A).
･ Shooting mode S: Choose faster
shutter speed.
･ Shooting mode A: Choose smaller
aperture (higher f-number).
Subject too dark;
limits of camera
exposure metering
system exceeded.
･ Increase ISO sensitivity.
･ Shooting mode P: Use optional
ash unit (ash can also be used if
alert is still displayed after
following settings are adjusted in
mode S or A).
･ Shooting mode S: Choose slower
shutter speed.
･ Shooting mode A: Choose wider
aperture (lower f-number).
c
(ashes)
Flash has red at full
power.
Photo may be underexposed. Check
distance to subject and settings such
as aperture, ash range, and ISO
sensitivity.
Subjects appear dark
and underexposed.
Use optional ash unit.