Owner's Manual
Table Of Contents
- Digital Camera Z 30 Reference Guide
- Table of contents
- When your first photo can’t wait
- Package contents
- About this document
- For your safety
- Notices
- Getting to know the camera
- First steps
- Basic photography and playback
- Basic settings
- Shooting controls
- The i menu
- Playback
- Menu guide
- Defaults
- The playback menu: Managing images
- The photo shooting menu: Shooting options
- Reset photo shooting menu
- Storage folder
- File naming
- Choose image area
- Image quality
- Image size
- RAW recording
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Color space
- Active D-Lighting
- Long exposure NR
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction shooting
- Metering
- Flash control
- Flash mode
- Flash compensation
- Release mode
- Focus mode
- AF-area mode
- Vibration reduction
- Auto bracketing
- Multiple exposure
- HDR (high dynamic range)
- Interval timer shooting
- Time-lapse video
- Focus shift shooting
- Silent photography
- The video recording menu: Video recording options
- Reset video recording menu
- File naming
- Frame size/frame rate
- Video quality
- Video file type
- ISO sensitivity settings
- White balance
- Set Picture Control
- Manage Picture Control
- Active D-Lighting
- High ISO NR
- Vignette control
- Diffraction compensation
- Auto distortion control
- Flicker reduction
- Metering
- Release mode (save frame)
- Focus mode
- AF-area mode
- Vibration reduction
- Electronic VR
- Microphone sensitivity
- Attenuator
- Frequency response
- Wind noise reduction
- Timecode
- Custom Settings: Fine-tuning camera settings
- Reset custom settings
- a: Autofocus
- b: Metering/exposure
- c: Timers/AE lock
- d: Shooting/display
- e: Bracketing/flash
- f: Controls
- g: Video
- The setup menu: Camera setup
- Format memory card
- Save user settings
- Reset user settings
- Language
- Time zone and date
- Monitor brightness
- Monitor color balance
- REC lamp brightness
- Information display
- AF fine-tuning options
- Non-CPU lens data
- Save focus position
- Image Dust Off ref photo
- Pixel mapping
- Image comment
- Copyright information
- Beep options
- Touch controls
- Self-portrait mode
- HDMI
- Airplane mode
- Connect to smart device
- Connect to computer
- Wireless remote (ML-L7) options
- Conformity marking
- USB power delivery
- Energy saving (photo mode)
- Slot empty release lock
- Save/load menu settings
- Reset all settings
- Firmware version
- The retouch menu: Creating retouched copies
- My Menu/Recent settings
- Establishing wireless connections to computers or smart devices
- Cabled connections to computers and HDMI devices
- On-camera flash photography
- Remote flash photography
- Troubleshooting
- Technical notes
- Compatible lenses and accessories
- Display in the monitor
- Compatible flash units
- Other compatible accessories
- Software
- Caring for the camera
- Caring for the camera and battery: Cautions
- Specifications
- Approved memory cards
- Portable chargers (power banks)
- Memory card capacity
- Available recording time
- Battery endurance
- Trademarks and licenses
- Notices
- Bluetooth and Wi-Fi (wireless LAN)
- Index
- Z 30 Digital Camera User's Manual
- NIKKOR Z DX 50-250mm f/4.5-6.3 VR Len's User’s Manual
- NIKKOR Z DX 16-50mm f/3.5-6.3 VR User's Manual
- Z DX 50.-250/4.5-6.3 VR Warranty
- Z 30 Digital Camera Warranty
Focus
93
Choosing an AF-area mode
❚❚
･ AF-ar
ea mode can be selected using the [AF-area mode] items in the
i
menu, photo shooting menu, and video recording menu (0169,
0266, 0331).
･ At default settings, AF-area mode can also be selected by holding the
Fn2 button and rotating the sub-command dial (059).
Option Description
3
[P
inpoint
AF]
･ With a focus area smaller than that employed for
single-point AF, pinpoint AF is used for pinpoint focus
on a selected spot in the frame.
･ Focusing may be slower than with single-point AF.
･ Recommended for shots involving static subjects,
such as buildings, in-studio product photography, or
close-ups.
･ This option is only available when photo mode is
selected and [Single AF] is chosen for [Focus mode].
d
[Single-
point AF]
･ The camera focuses on a point selected by the user.
･ Use with stationary subjects.