User Manual

105
Menu Guide
e3: AA flash mode x 155
When non-TTL Auto flash mode is used with the SB-80DX or SB-28DX, Auto
Aperture flash is not performed. However, this can be changed.
Options:
Off: Non-TTL Auto flash without Auto Aperture flash (Set
aperture on the Speedlight)
On: Non-TTL Auto flash with Auto Aperture flash
e4: Modeling flash x 151
On the SB-800/SB-600, the modeling flash fires when the depth-of-field
preview button on the camera is pressed. However, this can be changed.
Options:
On: Modeling flash fired and depth-of-field preview
Off: Depth-of-field preview only
e5: Auto BKT set x 75
At the default setting, both Auto Exposure Bracketing and Flash Exposure
Bracketing are active. However, this can be changed so that only Auto
Exposure Bracketing or Flash Exposure Bracketing is active.
Options:
AE & flash: Auto Exposure Bracketing and Flash Exposure
Bracketing are active
AE only: Only Auto Exposure Bracketing is active
Flash only: Only Flash Exposure Bracketing is active
• With the SB-800, setting on the Speedlight overrides the setting in “e3: AA flash
mode”.
P930_En 04.10.19 7:19 PM Page 105