User Manual

26
6. Setting Metering System and Exposure Mode
Set metering system to ” (3D Color Matrix Metering) and exposure
mode to ¡ (Programmed Auto).
1
Set the metering system selector to ”
(Matrix Metering) while pressing the
metering system selector lock release.
• The Matrix Metering indication q appears in
the viewfinder.
• Exposure data from the 1,005-pixel RGB sensor,
as well as scene brightness, contrast, subject
distance (Distance Information) and the scene’s
colors are accounted for in order to provide an
accurate exposure in 3D Color Matrix Metering
(x 62).
2
Rotate the Main-Command Dial while
pressing the exposure mode button to set
the exposure mode to ¡ (Programmed
Auto).
• When the shutter release button is lightly
pressed, the correct shutter speed and
aperture—as automatically determined by the
camera—appear in the top and rear (in large
and detailed display) LCD panel and viewfinder.
P930_En 04.10.19 7:18 PM Page 26