User Manual

97
Menu Guide
b1: EV step x 64, 66, 68, 70
At the default setting, shutter speed and aperture are indicated in 1/3 EV
steps. However, this can be changed to 1/2 or 1 EV steps.
Options:
1/3 step: Indicated/selected in 1/3 EV steps
1/2 step: Indicated/selected in 1/2 EV steps
1 step: Indicated/selected in 1 EV steps
b2: Exp. comp. EV x 74
At the default setting, exposure compensation is set in 1/3 EV steps.
However, this can be changed to 1/2 or 1 EV steps.
Options:
1/3 step: Selected in 1/3 EV steps
1/2 step: Selected in 1/2 EV steps
1 step: Selected in 1 EV steps
b3: Exposure comp. x 74
Exposure compensation is set using the Main-Command Dial and the =
button by default. However, it can be set to be selected using only the Sub-
Command Dial in Programmed Auto and Shutter-Priority Auto, or using only
the Main-Command Dial in Aperture-Priority Auto exposure mode.
Options:
[+/–] & CMD Dial: Exposure compensation selected with
Command Dial while pressing the = button
CMD Dial only: Exposure compensation selected only with
Command Dial
• If “CMD Dial only” is selected in Manual exposure mode, electronic analog displays
in the top LCD panel and viewfinder appear and “0” of the display blinks. In
Manual exposure mode, exposure compensation cannot be selected only with the
Command Dial even if ”CMD Dial only“ is selected.
• If “Change Main/Sub” is selected in “f4: Command dials” (x 109), the operation
of the Main- and Sub-Command Dials switch (except in Programmed Auto
exposure mode).
P930_En 04.10.19 7:19 PM Page 97